linux-kernel - [PATCH v2 1/3] dt-bindings: fu540: prci: convert PRCI bindings to json-schema

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1601393531-2402-2-git-send-email-sagar.kadam@sifive.com>
Date:   Tue, 29 Sep 2020 21:02:09 +0530
From:   Sagar Kadam <sagar.kadam@...ive.com>
To:     linux-clk@...r.kernel.org
Cc:     devicetree@...r.kernel.org, linux-riscv@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-pwm@...r.kernel.org,
        mturquette@...libre.com, sboyd@...nel.org, robh+dt@...nel.org,
        palmer@...belt.com, paul.walmsley@...ive.com, tglx@...utronix.de,
        jason@...edaemon.net, maz@...nel.org, thierry.reding@...il.com,
        u.kleine-koenig@...gutronix.de, lee.jones@...aro.org,
        aou@...s.berkeley.edu, yash.shah@...ive.com,
        Sagar Kadam <sagar.kadam@...ive.com>
Subject: [PATCH v2 1/3] dt-bindings: fu540: prci: convert PRCI bindings to json-schema

FU540-C000 SoC from SiFive has a PRCI block, here we convert
the device tree bindings from txt to YAML.

Signed-off-by: Sagar Kadam <sagar.kadam@...ive.com>
---
 .../bindings/clock/sifive/fu540-prci.txt           | 46 -----------------
 .../bindings/clock/sifive/fu540-prci.yaml          | 60 ++++++++++++++++++++++
 2 files changed, 60 insertions(+), 46 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt
 create mode 100644 Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml

diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt
deleted file mode 100644
index 349808f..0000000
--- a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-SiFive FU540 PRCI bindings
-
-On the FU540 family of SoCs, most system-wide clock and reset integration
-is via the PRCI IP block.
-
-Required properties:
-- compatible: Should be "sifive,<chip>-prci".  Only one value is
-	supported: "sifive,fu540-c000-prci"
-- reg: Should describe the PRCI's register target physical address region
-- clocks: Should point to the hfclk device tree node and the rtcclk
-          device tree node.  The RTC clock here is not a time-of-day clock,
-	  but is instead a high-stability clock source for system timers
-	  and cycle counters.
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock via the clock ID
-macros defined in include/dt-bindings/clock/sifive-fu540-prci.h.
-These macros begin with PRCI_CLK_.
-
-The hfclk and rtcclk nodes are required, and represent physical
-crystals or resonators located on the PCB.  These nodes should be present
-underneath /, rather than /soc.
-
-Examples:
-
-/* under /, in PCB-specific DT data */
-hfclk: hfclk {
-	#clock-cells = <0>;
-	compatible = "fixed-clock";
-	clock-frequency = <33333333>;
-	clock-output-names = "hfclk";
-};
-rtcclk: rtcclk {
-	#clock-cells = <0>;
-	compatible = "fixed-clock";
-	clock-frequency = <1000000>;
-	clock-output-names = "rtcclk";
-};
-
-/* under /soc, in SoC-specific DT data */
-prci: clock-controller@...00000 {
-	compatible = "sifive,fu540-c000-prci";
-	reg = <0x0 0x10000000 0x0 0x1000>;
-	clocks = <&hfclk>, <&rtcclk>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
new file mode 100644
index 0000000..c3be1b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sifive/fu540-prci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive FU540 Power Reset Clock Interrupt Controller (PRCI)
+
+maintainers:
+  - Sagar Kadam <sagar.kadam@...ive.com>
+  - Paul Walmsley  <paul.walmsley@...ive.com>
+
+description:
+  On the FU540 family of SoCs, most system-wide clock and reset integration
+  is via the PRCI IP block.
+  The clock consumer should specify the desired clock via the clock ID
+  macros defined in include/dt-bindings/clock/sifive-fu540-prci.h.
+  These macros begin with PRCI_CLK_.
+
+  The hfclk and rtcclk nodes are required, and represent physical
+  crystals or resonators located on the PCB.  These nodes should be present
+  underneath /, rather than /soc.
+
+properties:
+  compatible:
+    const: sifive,fu540-c000-prci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: high frequency clock.
+      - description: RTL clock.
+
+  clock-names:
+    items:
+      - const: hfclk
+      - const: rtcclk
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    prci: clock-controller@...00000 {
+      compatible = "sifive,fu540-c000-prci";
+      reg = <0x10000000 0x1000>;
+      clocks = <&hfclk>, <&rtcclk>;
+      #clock-cells = <1>;
+    };
-- 
2.7.4