| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 29 Sep 2020 09:27:11 +0000
From: "Viorel Suman (OSS)" <viorel.suman@....nxp.com>
To: Philipp Zabel <pza@...gutronix.de>,
"Viorel Suman (OSS)" <viorel.suman@....nxp.com>
CC: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>, Timur Tabi <timur@...nel.org>,
Nicolin Chen <nicoleotsuka@...il.com>,
Xiubo Li <Xiubo.Lee@...il.com>,
Fabio Estevam <festevam@...il.com>,
Shengjiu Wang <shengjiu.wang@...il.com>,
Matthias Schiffer <matthias.schiffer@...tq-group.com>,
Cosmin-Gabriel Samoila <cosmin.samoila@....com>,
"alsa-devel@...a-project.org" <alsa-devel@...a-project.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linuxppc-dev@...ts.ozlabs.org" <linuxppc-dev@...ts.ozlabs.org>,
dl-linux-imx <linux-imx@....com>,
Viorel Suman <viorel.suman@...il.com>
Subject: RE: [PATCH v2 1/2] ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver
Hi Philipp,
Thank you for your review, please check my comments inline.
/Viorel
> -----Original Message-----
> From: Philipp Zabel [mailto:pza@...gutronix.de]
> Sent: Tuesday, September 22, 2020 3:09 PM
> To: Viorel Suman (OSS) <viorel.suman@....nxp.com>
> Cc: Liam Girdwood <lgirdwood@...il.com>; Mark Brown
> <broonie@...nel.org>; Rob Herring <robh+dt@...nel.org>; Jaroslav Kysela
> <perex@...ex.cz>; Takashi Iwai <tiwai@...e.com>; Timur Tabi
> <timur@...nel.org>; Nicolin Chen <nicoleotsuka@...il.com>; Xiubo Li
> <Xiubo.Lee@...il.com>; Fabio Estevam <festevam@...il.com>; Shengjiu
> Wang <shengjiu.wang@...il.com>; Viorel Suman <viorel.suman@....com>;
> Matthias Schiffer <matthias.schiffer@...tq-group.com>; Cosmin-Gabriel
> Samoila <cosmin.samoila@....com>; alsa-devel@...a-project.org;
> devicetree@...r.kernel.org; linux-kernel@...r.kernel.org; linuxppc-
> dev@...ts.ozlabs.org; dl-linux-imx <linux-imx@....com>; Viorel Suman
> <viorel.suman@...il.com>
> Subject: Re: [PATCH v2 1/2] ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver
>
> On Mon, Sep 21, 2020 at 10:08:11PM +0300, Viorel Suman (OSS) wrote:
> > From: Viorel Suman <viorel.suman@....com>
> >
> > XCVR (Audio Transceiver) is a on-chip functional module found on
> > i.MX8MP. It support HDMI2.1 eARC, HDMI1.4 ARC and SPDIF.
> >
> > Signed-off-by: Viorel Suman <viorel.suman@....com>
> > ---
> > sound/soc/fsl/Kconfig | 10 +
> > sound/soc/fsl/Makefile | 2 +
> > sound/soc/fsl/fsl_xcvr.c | 1343
> > ++++++++++++++++++++++++++++++++++++++++++++++
> > sound/soc/fsl/fsl_xcvr.h | 266 +++++++++
> > 4 files changed, 1621 insertions(+)
> > create mode 100644 sound/soc/fsl/fsl_xcvr.c create mode 100644
> > sound/soc/fsl/fsl_xcvr.h
> >
> > diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index
> > 3f76ff7..d04b64d 100644
> > --- a/sound/soc/fsl/Kconfig
> > +++ b/sound/soc/fsl/Kconfig
> > @@ -95,6 +95,16 @@ config SND_SOC_FSL_EASRC
> > destination sample rate. It is a new design module compare with the
> > old ASRC.
> >
> > +config SND_SOC_FSL_XCVR
> > + tristate "NXP Audio Transceiver (XCVR) module support"
> > + select REGMAP_MMIO
> > + select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
> > + select SND_SOC_GENERIC_DMAENGINE_PCM
> > + help
> > + Say Y if you want to add Audio Transceiver (XCVR) support for NXP
> > + iMX CPUs. XCVR is a digital module that supports HDMI2.1 eARC,
> > + HDMI1.4 ARC and SPDIF.
> > +
> > config SND_SOC_FSL_UTILS
> > tristate
> >
> > diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile index
> > b835eeb..1d2231f 100644
> > --- a/sound/soc/fsl/Makefile
> > +++ b/sound/soc/fsl/Makefile
> > @@ -25,6 +25,7 @@ snd-soc-fsl-utils-objs := fsl_utils.o
> > snd-soc-fsl-dma-objs := fsl_dma.o snd-soc-fsl-mqs-objs := fsl_mqs.o
> > snd-soc-fsl-easrc-objs := fsl_easrc.o
> > +snd-soc-fsl-xcvr-objs := fsl_xcvr.o
> >
> > obj-$(CONFIG_SND_SOC_FSL_AUDMIX) += snd-soc-fsl-audmix.o
> > obj-$(CONFIG_SND_SOC_FSL_ASOC_CARD) += snd-soc-fsl-asoc-card.o @@
> > -38,6 +39,7 @@ obj-$(CONFIG_SND_SOC_FSL_UTILS) += snd-soc-fsl-utils.o
> > obj-$(CONFIG_SND_SOC_FSL_MQS) += snd-soc-fsl-mqs.o
> > obj-$(CONFIG_SND_SOC_FSL_EASRC) += snd-soc-fsl-easrc.o
> > obj-$(CONFIG_SND_SOC_POWERPC_DMA) += snd-soc-fsl-dma.o
> > +obj-$(CONFIG_SND_SOC_FSL_XCVR) += snd-soc-fsl-xcvr.o
> >
> > # MPC5200 Platform Support
> > obj-$(CONFIG_SND_MPC52xx_DMA) += mpc5200_dma.o diff --git
> > a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c new file mode
> > 100644 index 00000000..7391bca
> > --- /dev/null
> > +++ b/sound/soc/fsl/fsl_xcvr.c
> > @@ -0,0 +1,1343 @@
> [...]
> > +static int fsl_xcvr_probe(struct platform_device *pdev) {
> > + struct device *dev = &pdev->dev;
> > + struct device_node *np = dev->of_node;
> > + const struct of_device_id *of_id;
> > + struct fsl_xcvr *xcvr;
> > + struct resource *ram_res, *regs_res, *rx_res, *tx_res;
> > + void __iomem *regs;
> > + int ret, irq;
> > +
> > + of_id = of_match_device(fsl_xcvr_dt_ids, dev);
> > + if (!of_id)
> > + return -EINVAL;
> > +
> > + xcvr = devm_kzalloc(dev, sizeof(*xcvr), GFP_KERNEL);
> > + if (!xcvr)
> > + return -ENOMEM;
> > +
> > + xcvr->pdev = pdev;
> > + xcvr->ipg_clk = devm_clk_get(dev, "ipg");
> > + if (IS_ERR(xcvr->ipg_clk)) {
> > + dev_err(dev, "failed to get ipg clock\n");
> > + return PTR_ERR(xcvr->ipg_clk);
> > + }
> > +
> > + xcvr->phy_clk = devm_clk_get(dev, "phy");
> > + if (IS_ERR(xcvr->phy_clk)) {
> > + dev_err(dev, "failed to get phy clock\n");
> > + return PTR_ERR(xcvr->phy_clk);
> > + }
> > +
> > + xcvr->spba_clk = devm_clk_get(dev, "spba");
> > + if (IS_ERR(xcvr->spba_clk)) {
> > + dev_err(dev, "failed to get spba clock\n");
> > + return PTR_ERR(xcvr->spba_clk);
> > + }
> > +
> > + xcvr->pll_ipg_clk = devm_clk_get(dev, "pll_ipg");
> > + if (IS_ERR(xcvr->pll_ipg_clk)) {
> > + dev_err(dev, "failed to get pll_ipg clock\n");
> > + return PTR_ERR(xcvr->pll_ipg_clk);
> > + }
> > +
> > + ram_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> "ram");
> > + xcvr->ram_addr = devm_ioremap_resource(dev, ram_res);
> > + if (IS_ERR(xcvr->ram_addr))
> > + return PTR_ERR(xcvr->ram_addr);
> > +
> > + regs_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> "regs");
> > + regs = devm_ioremap_resource(dev, regs_res);
> > + if (IS_ERR(regs))
> > + return PTR_ERR(regs);
> > +
> > + xcvr->regmap = devm_regmap_init_mmio_clk(dev, NULL, regs,
> > + &fsl_xcvr_regmap_cfg);
> > + if (IS_ERR(xcvr->regmap)) {
> > + dev_err(dev, "failed to init XCVR regmap: %ld\n",
> > + PTR_ERR(xcvr->regmap));
> > + return PTR_ERR(xcvr->regmap);
> > + }
> > +
> > + xcvr->reset = of_reset_control_get(np, NULL);
>
> Please use devm_reset_control_get_exclusive().
Done in V3.
>
> [...]
> > +static __maybe_unused int fsl_xcvr_runtime_resume(struct device *dev)
> > +{
> > + struct fsl_xcvr *xcvr = dev_get_drvdata(dev);
> > + int ret;
> > +
> > + ret = clk_prepare_enable(xcvr->ipg_clk);
> > + if (ret) {
> > + dev_err(dev, "failed to start IPG clock.\n");
> > + return ret;
> > + }
> > +
> > + ret = clk_prepare_enable(xcvr->pll_ipg_clk);
> > + if (ret) {
> > + dev_err(dev, "failed to start PLL IPG clock.\n");
> > + goto stop_ipg_clk;
> > + }
> > +
> > + ret = clk_prepare_enable(xcvr->phy_clk);
> > + if (ret) {
> > + dev_err(dev, "failed to start PHY clock: %d\n", ret);
> > + goto stop_pll_ipg_clk;
> > + }
> > +
> > + ret = clk_prepare_enable(xcvr->spba_clk);
> > + if (ret) {
> > + dev_err(dev, "failed to start SPBA clock.\n");
> > + goto stop_phy_clk;
> > + }
> > +
> > + regcache_cache_only(xcvr->regmap, false);
> > + regcache_mark_dirty(xcvr->regmap);
> > + ret = regcache_sync(xcvr->regmap);
> > +
> > + if (ret) {
> > + dev_err(dev, "failed to sync regcache.\n");
> > + goto stop_spba_clk;
> > + }
> > +
> > + reset_control_assert(xcvr->reset);
> > + reset_control_deassert(xcvr->reset);
>
> No delay required between the two?
Not required. Just to keep things in proper context - in
V3 I moved reset_control_assert call into runtime_suspend.
/Viorel
Powered by blists - more mailing lists