| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <846b3cb0-813f-9ea1-ef80-48fdf3c7bf03@roeck-us.net>
Date: Tue, 29 Sep 2020 22:36:43 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Xu Yilun <yilun.xu@...el.com>, lee.jones@...aro.org,
jdelvare@...e.com, linux-hwmon@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: trix@...hat.com, matthew.gerlach@...ux.intel.com,
russell.h.weight@...el.com, lgoncalv@...hat.com, hao.wu@...el.com,
mdf@...nel.org
Subject: Re: [PATCH v3 2/2] hwmon: intel-m10-bmc-hwmon: add hwmon support for
Intel MAX 10 BMC
On 9/20/20 11:17 PM, Xu Yilun wrote:
> This patch adds hwmon functionality for Intel MAX 10 BMC chip. This BMC
> chip connects to a set of sensor chips to monitor current, voltage,
> thermal and power of different components on board. The BMC firmware is
> responsible for sensor data sampling and recording in shared registers.
> Host driver reads the sensor data from these shared registers and
> exposes them to users as hwmon interfaces.
>
> Signed-off-by: Xu Yilun <yilun.xu@...el.com>
> Signed-off-by: Wu Hao <hao.wu@...el.com>
> Signed-off-by: Matthew Gerlach <matthew.gerlach@...ux.intel.com>
> Signed-off-by: Tom Rix <trix@...hat.com>
Reviewed-by: Guenter Roeck <linux@...ck-us.net>
> ---
> v2: add the Documentation
> refactor the code, provide static hwmon_channel_info
> remove Unnecessary hwmon-sysfs.h
> make the sensor data table const
> v3: make the data tables a pointer array indexed by hwmon_sensor_types
> some minor fixes
> ---
> Documentation/hwmon/index.rst | 1 +
> Documentation/hwmon/intel-m10-bmc-hwmon.rst | 78 +++++++
> drivers/hwmon/Kconfig | 11 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/intel-m10-bmc-hwmon.c | 334 ++++++++++++++++++++++++++++
> 5 files changed, 425 insertions(+)
> create mode 100644 Documentation/hwmon/intel-m10-bmc-hwmon.rst
> create mode 100644 drivers/hwmon/intel-m10-bmc-hwmon.c
>
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index a926f1a..4bcb1a7 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -74,6 +74,7 @@ Hardware Monitoring Kernel Drivers
> ina209
> ina2xx
> ina3221
> + intel-m10-bmc-hwmon
> ir35221
> ir38064
> isl68137
> diff --git a/Documentation/hwmon/intel-m10-bmc-hwmon.rst b/Documentation/hwmon/intel-m10-bmc-hwmon.rst
> new file mode 100644
> index 0000000..3d148c6
> --- /dev/null
> +++ b/Documentation/hwmon/intel-m10-bmc-hwmon.rst
> @@ -0,0 +1,78 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +Kernel driver intel-m10-bmc-hwmon
> +=================================
> +
> +Supported chips:
> +
> + * Intel MAX 10 BMC for Intel PAC N3000
> +
> + Prefix: 'n3000bmc-hwmon'
> +
> +Author: Xu Yilun <yilun.xu@...el.com>
> +
> +
> +Description
> +-----------
> +
> +This driver adds the temperature, voltage, current and power reading
> +support for the Intel MAX 10 Board Management Controller (BMC) chip.
> +The BMC chip is integrated in some Intel Programmable Acceleration
> +Cards (PAC). It connects to a set of sensor chips to monitor the
> +sensor data of different components on the board. The BMC firmware is
> +responsible for sensor data sampling and recording in shared
> +registers. The host driver reads the sensor data from these shared
> +registers and exposes them to users as hwmon interfaces.
> +
> +The BMC chip is implemented using the Intel MAX 10 CPLD. It could be
> +reprogramed to some variants in order to support different Intel
> +PACs. The driver is designed to be able to distinguish between the
> +variants, but now it only supports the BMC for Intel PAC N3000.
> +
> +
> +Sysfs attributes
> +----------------
> +
> +The following attributes are supported:
> +
> +- Intel MAX 10 BMC for Intel PAC N3000:
> +
> +======================= =======================================================
> +tempX_input Temperature of the component (specified by tempX_label)
> +tempX_max Temperature maximum setpoint of the component
> +tempX_crit Temperature critical setpoint of the component
> +tempX_max_hyst Hysteresis for temperature maximum of the component
> +tempX_crit_hyst Hysteresis for temperature critical of the component
> +temp1_label "Board Temperature"
> +temp2_label "FPGA Die Temperature"
> +temp3_label "QSFP0 Temperature"
> +temp4_label "QSFP1 Temperature"
> +temp5_label "Retimer A Temperature"
> +temp6_label "Retimer A SerDes Temperature"
> +temp7_label "Retimer B Temperature"
> +temp8_label "Retimer B SerDes Temperature"
> +
> +inX_input Measured voltage of the component (specified by
> + inX_label)
> +in0_label "QSFP0 Supply Voltage"
> +in1_label "QSFP1 Supply Voltage"
> +in2_label "FPGA Core Voltage"
> +in3_label "12V Backplane Voltage"
> +in4_label "1.2V Voltage"
> +in5_label "12V AUX Voltage"
> +in6_label "1.8V Voltage"
> +in7_label "3.3V Voltage"
> +
> +currX_input Measured current of the component (specified by
> + currX_label)
> +curr1_label "FPGA Core Current"
> +curr2_label "12V Backplane Current"
> +curr3_label "12V AUX Current"
> +
> +powerX_input Measured power of the component (specified by
> + powerX_label)
> +power1_label "Board Power"
> +
> +======================= =======================================================
> +
> +All the attributes are read-only.
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 8dc28b2..53af15c 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -2064,6 +2064,17 @@ config SENSORS_XGENE
> If you say yes here you get support for the temperature
> and power sensors for APM X-Gene SoC.
>
> +config SENSORS_INTEL_M10_BMC_HWMON
> + tristate "Intel MAX10 BMC Hardware Monitoring"
> + depends on MFD_INTEL_M10_BMC
> + help
> + This driver provides support for the hardware monitoring functionality
> + on Intel MAX10 BMC chip.
> +
> + This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its
> + sensors monitor various telemetry data of different components on the
> + card, e.g. board temperature, FPGA core temperature/voltage/current.
> +
> if ACPI
>
> comment "ACPI drivers"
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index a8f4b35..ba5a25a 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -90,6 +90,7 @@ obj-$(CONFIG_SENSORS_IIO_HWMON) += iio_hwmon.o
> obj-$(CONFIG_SENSORS_INA209) += ina209.o
> obj-$(CONFIG_SENSORS_INA2XX) += ina2xx.o
> obj-$(CONFIG_SENSORS_INA3221) += ina3221.o
> +obj-$(CONFIG_SENSORS_INTEL_M10_BMC_HWMON) += intel-m10-bmc-hwmon.o
> obj-$(CONFIG_SENSORS_IT87) += it87.o
> obj-$(CONFIG_SENSORS_JC42) += jc42.o
> obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
> diff --git a/drivers/hwmon/intel-m10-bmc-hwmon.c b/drivers/hwmon/intel-m10-bmc-hwmon.c
> new file mode 100644
> index 0000000..17d5e6b
> --- /dev/null
> +++ b/drivers/hwmon/intel-m10-bmc-hwmon.c
> @@ -0,0 +1,334 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Intel MAX 10 BMC HWMON Driver
> + *
> + * Copyright (C) 2018-2020 Intel Corporation. All rights reserved.
> + *
> + */
> +#include <linux/device.h>
> +#include <linux/hwmon.h>
> +#include <linux/mfd/intel-m10-bmc.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/platform_device.h>
> +
> +struct m10bmc_sdata {
> + unsigned int reg_input;
> + unsigned int reg_max;
> + unsigned int reg_crit;
> + unsigned int reg_hyst;
> + unsigned int reg_min;
> + unsigned int multiplier;
> + const char *label;
> +};
> +
> +struct m10bmc_hwmon_board_data {
> + const struct m10bmc_sdata *tables[hwmon_max];
> + const struct hwmon_channel_info **hinfo;
> +};
> +
> +struct m10bmc_hwmon {
> + struct device *dev;
> + struct hwmon_chip_info chip;
> + char *hw_name;
> + struct intel_m10bmc *m10bmc;
> + const struct m10bmc_hwmon_board_data *bdata;
> +};
> +
> +static const struct m10bmc_sdata n3000bmc_temp_tbl[] = {
> + { 0x100, 0x104, 0x108, 0x10c, 0x0, 500, "Board Temperature" },
> + { 0x110, 0x114, 0x118, 0x0, 0x0, 500, "FPGA Die Temperature" },
> + { 0x11c, 0x124, 0x120, 0x0, 0x0, 500, "QSFP0 Temperature" },
> + { 0x12c, 0x134, 0x130, 0x0, 0x0, 500, "QSFP1 Temperature" },
> + { 0x168, 0x0, 0x0, 0x0, 0x0, 500, "Retimer A Temperature" },
> + { 0x16c, 0x0, 0x0, 0x0, 0x0, 500, "Retimer A SerDes Temperature" },
> + { 0x170, 0x0, 0x0, 0x0, 0x0, 500, "Retimer B Temperature" },
> + { 0x174, 0x0, 0x0, 0x0, 0x0, 500, "Retimer B SerDes Temperature" },
> +};
> +
> +static const struct m10bmc_sdata n3000bmc_in_tbl[] = {
> + { 0x128, 0x0, 0x0, 0x0, 0x0, 1, "QSFP0 Supply Voltage" },
> + { 0x138, 0x0, 0x0, 0x0, 0x0, 1, "QSFP1 Supply Voltage" },
> + { 0x13c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA Core Voltage" },
> + { 0x144, 0x0, 0x0, 0x0, 0x0, 1, "12V Backplane Voltage" },
> + { 0x14c, 0x0, 0x0, 0x0, 0x0, 1, "1.2V Voltage" },
> + { 0x150, 0x0, 0x0, 0x0, 0x0, 1, "12V AUX Voltage" },
> + { 0x158, 0x0, 0x0, 0x0, 0x0, 1, "1.8V Voltage" },
> + { 0x15c, 0x0, 0x0, 0x0, 0x0, 1, "3.3V Voltage" },
> +};
> +
> +static const struct m10bmc_sdata n3000bmc_curr_tbl[] = {
> + { 0x140, 0x0, 0x0, 0x0, 0x0, 1, "FPGA Core Current" },
> + { 0x148, 0x0, 0x0, 0x0, 0x0, 1, "12V Backplane Current" },
> + { 0x154, 0x0, 0x0, 0x0, 0x0, 1, "12V AUX Current" },
> +};
> +
> +static const struct m10bmc_sdata n3000bmc_power_tbl[] = {
> + { 0x160, 0x0, 0x0, 0x0, 0x0, 1000, "Board Power" },
> +};
> +
> +static const struct hwmon_channel_info *n3000bmc_hinfo[] = {
> + HWMON_CHANNEL_INFO(temp,
> + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST |
> + HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL,
> + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
> + HWMON_T_LABEL,
> + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
> + HWMON_T_LABEL,
> + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
> + HWMON_T_LABEL,
> + HWMON_T_INPUT | HWMON_T_LABEL,
> + HWMON_T_INPUT | HWMON_T_LABEL,
> + HWMON_T_INPUT | HWMON_T_LABEL,
> + HWMON_T_INPUT | HWMON_T_LABEL),
> + HWMON_CHANNEL_INFO(in,
> + HWMON_I_INPUT | HWMON_I_LABEL,
> + HWMON_I_INPUT | HWMON_I_LABEL,
> + HWMON_I_INPUT | HWMON_I_LABEL,
> + HWMON_I_INPUT | HWMON_I_LABEL,
> + HWMON_I_INPUT | HWMON_I_LABEL,
> + HWMON_I_INPUT | HWMON_I_LABEL,
> + HWMON_I_INPUT | HWMON_I_LABEL,
> + HWMON_I_INPUT | HWMON_I_LABEL),
> + HWMON_CHANNEL_INFO(curr,
> + HWMON_C_INPUT | HWMON_C_LABEL,
> + HWMON_C_INPUT | HWMON_C_LABEL,
> + HWMON_C_INPUT | HWMON_C_LABEL),
> + HWMON_CHANNEL_INFO(power,
> + HWMON_P_INPUT | HWMON_P_LABEL),
> + NULL
> +};
> +
> +static const struct m10bmc_hwmon_board_data n3000bmc_hwmon_bdata = {
> + .tables = {
> + [hwmon_temp] = n3000bmc_temp_tbl,
> + [hwmon_in] = n3000bmc_in_tbl,
> + [hwmon_curr] = n3000bmc_curr_tbl,
> + [hwmon_power] = n3000bmc_power_tbl,
> + },
> +
> + .hinfo = n3000bmc_hinfo,
> +};
> +
> +static umode_t
> +m10bmc_hwmon_is_visible(const void *data, enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + return 0444;
> +}
> +
> +static const struct m10bmc_sdata *
> +find_sensor_data(struct m10bmc_hwmon *hw, enum hwmon_sensor_types type,
> + int channel)
> +{
> + const struct m10bmc_sdata *tbl;
> +
> + tbl = hw->bdata->tables[type];
> + if (!tbl)
> + return ERR_PTR(-EOPNOTSUPP);
> +
> + return &tbl[channel];
> +}
> +
> +static int do_sensor_read(struct m10bmc_hwmon *hw,
> + const struct m10bmc_sdata *data,
> + unsigned int regoff, long *val)
> +{
> + unsigned int regval;
> + int ret;
> +
> + ret = m10bmc_sys_read(hw->m10bmc, regoff, ®val);
> + if (ret)
> + return ret;
> +
> + /*
> + * BMC Firmware will return 0xdeadbeef if the sensor value is invalid
> + * at that time. This usually happens on sensor channels which connect
> + * to external pluggable modules, e.g. QSFP temperature and voltage.
> + * When the QSFP is unplugged from cage, driver will get 0xdeadbeef
> + * from their registers.
> + */
> + if (regval == 0xdeadbeef)
> + return -ENODATA;
> +
> + *val = regval * data->multiplier;
> +
> + return 0;
> +}
> +
> +static int m10bmc_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct m10bmc_hwmon *hw = dev_get_drvdata(dev);
> + unsigned int reg = 0, reg_hyst = 0;
> + const struct m10bmc_sdata *data;
> + long hyst, value;
> + int ret;
> +
> + data = find_sensor_data(hw, type, channel);
> + if (IS_ERR(data))
> + return PTR_ERR(data);
> +
> + switch (type) {
> + case hwmon_temp:
> + switch (attr) {
> + case hwmon_temp_input:
> + reg = data->reg_input;
> + break;
> + case hwmon_temp_max_hyst:
> + reg_hyst = data->reg_hyst;
> + fallthrough;
> + case hwmon_temp_max:
> + reg = data->reg_max;
> + break;
> + case hwmon_temp_crit_hyst:
> + reg_hyst = data->reg_hyst;
> + fallthrough;
> + case hwmon_temp_crit:
> + reg = data->reg_crit;
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> + break;
> + case hwmon_in:
> + switch (attr) {
> + case hwmon_in_input:
> + reg = data->reg_input;
> + break;
> + case hwmon_in_max:
> + reg = data->reg_max;
> + break;
> + case hwmon_in_crit:
> + reg = data->reg_crit;
> + break;
> + case hwmon_in_min:
> + reg = data->reg_min;
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> + break;
> + case hwmon_curr:
> + switch (attr) {
> + case hwmon_curr_input:
> + reg = data->reg_input;
> + break;
> + case hwmon_curr_max:
> + reg = data->reg_max;
> + break;
> + case hwmon_curr_crit:
> + reg = data->reg_crit;
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> + break;
> + case hwmon_power:
> + switch (attr) {
> + case hwmon_power_input:
> + reg = data->reg_input;
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + if (!reg)
> + return -EOPNOTSUPP;
> +
> + ret = do_sensor_read(hw, data, reg, &value);
> + if (ret)
> + return ret;
> +
> + if (reg_hyst) {
> + ret = do_sensor_read(hw, data, reg_hyst, &hyst);
> + if (ret)
> + return ret;
> +
> + value -= hyst;
> + }
> +
> + *val = value;
> +
> + return 0;
> +}
> +
> +static int m10bmc_hwmon_read_string(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel, const char **str)
> +{
> + struct m10bmc_hwmon *hw = dev_get_drvdata(dev);
> + const struct m10bmc_sdata *data;
> +
> + data = find_sensor_data(hw, type, channel);
> + if (IS_ERR(data))
> + return PTR_ERR(data);
> +
> + *str = data->label;
> +
> + return 0;
> +}
> +
> +static const struct hwmon_ops m10bmc_hwmon_ops = {
> + .is_visible = m10bmc_hwmon_is_visible,
> + .read = m10bmc_hwmon_read,
> + .read_string = m10bmc_hwmon_read_string,
> +};
> +
> +static int m10bmc_hwmon_probe(struct platform_device *pdev)
> +{
> + const struct platform_device_id *id = platform_get_device_id(pdev);
> + struct intel_m10bmc *m10bmc = dev_get_drvdata(pdev->dev.parent);
> + struct device *hwmon_dev, *dev = &pdev->dev;
> + struct m10bmc_hwmon *hw;
> + int i;
> +
> + hw = devm_kzalloc(dev, sizeof(*hw), GFP_KERNEL);
> + if (!hw)
> + return -ENOMEM;
> +
> + hw->dev = dev;
> + hw->m10bmc = m10bmc;
> + hw->bdata = (const struct m10bmc_hwmon_board_data *)id->driver_data;
> +
> + hw->chip.info = hw->bdata->hinfo;
> + hw->chip.ops = &m10bmc_hwmon_ops;
> +
> + hw->hw_name = devm_kstrdup(dev, id->name, GFP_KERNEL);
> + if (!hw->hw_name)
> + return -ENOMEM;
> +
> + for (i = 0; hw->hw_name[i]; i++)
> + if (hwmon_is_bad_char(hw->hw_name[i]))
> + hw->hw_name[i] = '_';
> +
> + hwmon_dev = devm_hwmon_device_register_with_info(dev, hw->hw_name,
> + hw, &hw->chip, NULL);
> + return PTR_ERR_OR_ZERO(hwmon_dev);
> +}
> +
> +static const struct platform_device_id intel_m10bmc_hwmon_ids[] = {
> + {
> + .name = "n3000bmc-hwmon",
> + .driver_data = (unsigned long)&n3000bmc_hwmon_bdata,
> + },
> + { }
> +};
> +
> +static struct platform_driver intel_m10bmc_hwmon_driver = {
> + .probe = m10bmc_hwmon_probe,
> + .driver = {
> + .name = "intel-m10-bmc-hwmon",
> + },
> + .id_table = intel_m10bmc_hwmon_ids,
> +};
> +module_platform_driver(intel_m10bmc_hwmon_driver);
> +
> +MODULE_DEVICE_TABLE(platform, intel_m10bmc_hwmon_ids);
> +MODULE_AUTHOR("Intel Corporation");
> +MODULE_DESCRIPTION("Intel MAX 10 BMC hardware monitor");
> +MODULE_LICENSE("GPL");
>
Powered by blists - more mailing lists