linux-kernel - Re: [PATCH] serial: max310x: rework RX interrupt handling

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAHp75VccK7hu51qCdRC4GaTO3XaSaYLD6TeuuqHLY9Tf1Tb67A@mail.gmail.com>
Date:   Wed, 30 Sep 2020 17:24:48 +0300
From:   Andy Shevchenko <andy.shevchenko@...il.com>
To:     Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jiri Slaby <jirislaby@...nel.org>,
        "open list:SERIAL DRIVERS" <linux-serial@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Jan Kundrát <jan.kundrat@...net.cz>,
        Mark Brown <broonie@...nel.org>,
        linux-spi <linux-spi@...r.kernel.org>
Subject: Re: [PATCH] serial: max310x: rework RX interrupt handling

On Wed, Sep 30, 2020 at 4:51 PM Thomas Petazzoni
<thomas.petazzoni@...tlin.com> wrote:
>
> Currently, the RX interrupt logic uses the RXEMPTY interrupt, with the
> RXEMPTYINV bit set, which means we get an RX interrupt as soon as the
> RX FIFO is non-empty.
>
> However, with the MAX310X having a FIFO of 128 bytes, this makes very
> poor use of the FIFO: we trigger an interrupt as soon as the RX FIFO
> has one byte, which means a lot of interrupts, each only collecting a
> few bytes from the FIFO, causing a significant CPU load.
>
> Instead this commit relies on two other RX interrupt events:
>
>  - MAX310X_IRQ_RXFIFO_BIT, which triggers when the RX FIFO has reached
>    a certain threshold, which we define to be half of the FIFO
>    size. This ensure we get an interrupt before the RX FIFO fills up.
>
>  - MAX310X_LSR_RXTO_BIT, which triggers when the RX FIFO has received
>    some bytes, and then no more bytes are received for a certain
>    time. Arbitrarily, this time is defined to the time is takes to
>    receive 4 characters.
>
> On a Microchip SAMA5D3 platform that is receiving 20 bytes every 16ms
> over one MAX310X UART, this patch has allowed to reduce the CPU
> consumption of the interrupt handler thread from ~25% to 6-7%.

Was it always like this?
Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>
See one nit-pick below.

> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@...tlin.com>
> ---
>  drivers/tty/serial/max310x.c | 29 ++++++++++++++++++++++++-----
>  1 file changed, 24 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
> index 8434bd5a8ec78..a1c80850d77ed 100644
> --- a/drivers/tty/serial/max310x.c
> +++ b/drivers/tty/serial/max310x.c
> @@ -1056,9 +1056,9 @@ static int max310x_startup(struct uart_port *port)
>         max310x_port_update(port, MAX310X_MODE1_REG,
>                             MAX310X_MODE1_TRNSCVCTRL_BIT, 0);
>
> -       /* Configure MODE2 register & Reset FIFOs*/
> -       val = MAX310X_MODE2_RXEMPTINV_BIT | MAX310X_MODE2_FIFORST_BIT;
> -       max310x_port_write(port, MAX310X_MODE2_REG, val);
> +       /* Reset FIFOs*/

Add a space before the asterisk.

> +       max310x_port_write(port, MAX310X_MODE2_REG,
> +                          MAX310X_MODE2_FIFORST_BIT);
>         max310x_port_update(port, MAX310X_MODE2_REG,
>                             MAX310X_MODE2_FIFORST_BIT, 0);
>
> @@ -1086,8 +1086,27 @@ static int max310x_startup(struct uart_port *port)
>         /* Clear IRQ status register */
>         max310x_port_read(port, MAX310X_IRQSTS_REG);
>
> -       /* Enable RX, TX, CTS change interrupts */
> -       val = MAX310X_IRQ_RXEMPTY_BIT | MAX310X_IRQ_TXEMPTY_BIT;
> +       /*
> +        * Let's ask for an interrupt after a timeout equivalent to
> +        * the receiving time of 4 characters after the last character
> +        * has been received.
> +        */
> +       max310x_port_write(port, MAX310X_RXTO_REG, 4);
> +
> +       /*
> +        * Make sure we also get RX interrupts when the RX FIFO is
> +        * filling up quickly, so get an interrupt when half of the RX
> +        * FIFO has been filled in.
> +        */
> +       max310x_port_write(port, MAX310X_FIFOTRIGLVL_REG,
> +                          MAX310X_FIFOTRIGLVL_RX(MAX310X_FIFO_SIZE / 2));
> +
> +       /* Enable RX timeout interrupt in LSR */
> +       max310x_port_write(port, MAX310X_LSR_IRQEN_REG,
> +                          MAX310X_LSR_RXTO_BIT);
> +
> +       /* Enable LSR, RX FIFO trigger, CTS change interrupts */
> +       val = MAX310X_IRQ_LSR_BIT  | MAX310X_IRQ_RXFIFO_BIT | MAX310X_IRQ_TXEMPTY_BIT;
>         max310x_port_write(port, MAX310X_IRQEN_REG, val | MAX310X_IRQ_CTS_BIT);
>
>         return 0;
> --
> 2.26.2
>


-- 
With Best Regards,
Andy Shevchenko