[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201001190541.6364-1-faiz_abbas@ti.com>
Date: Fri, 2 Oct 2020 00:35:33 +0530
From: Faiz Abbas <faiz_abbas@...com>
To: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
CC: <will@...nel.org>, <robh+dt@...nel.org>, <nm@...com>,
<t-kristo@...com>, <faiz_abbas@...com>
Subject: [PATCH 0/8] Add support for UHS modes in TI's J721e and J7200 boards
The following patches add support for UHS modes for TI's j721e and j7200
boards.
Patches 1-3 add support for gpios to j7200-evm
Patches 4-6 add support for voltage regulators for required by the
SD card in both devices as well as enable UHS modes at 1.8V
Patches 5-6 add some required configs to the arm64 defconfig.
This series depends on driver patches adding tuning support here:
https://lore.kernel.org/linux-arm-kernel/20200923105206.7988-1-faiz_abbas@ti.com/
Faiz Abbas (8):
arm64: dts: ti: k3-j7200-main: Add gpio nodes in main domain
arm64: dts: ti: k3-j7200: Add gpio nodes in wakeup domain
arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio
modules
arm64: dts: ti: k3-j721e-main: Add output tap delay values
arm64: dts: ti: k3-j721e-common-proc-board: Add support SD card UHS
modes
arm64: dts: ti: k3-j7200-common-proc-board: Add support SD card UHS
modes
arm64: defconfig: Enable OMAP I2C driver
arm64: defconfig: Enable DAVINCI_GPIO driver
.../dts/ti/k3-j7200-common-proc-board.dts | 48 +++++++++++++
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 69 ++++++++++++++++++-
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 32 +++++++++
.../dts/ti/k3-j721e-common-proc-board.dts | 35 +++++++++-
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 22 ++++--
arch/arm64/configs/defconfig | 2 +
6 files changed, 201 insertions(+), 7 deletions(-)
--
2.17.1
Powered by blists - more mailing lists