lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201001191302.dlp2tzbvkk35vzgd@akan>
Date:   Thu, 1 Oct 2020 14:13:02 -0500
From:   Nishanth Menon <nm@...com>
To:     Faiz Abbas <faiz_abbas@...com>
CC:     <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>, <will@...nel.org>,
        <robh+dt@...nel.org>, <t-kristo@...com>
Subject: Re: [PATCH 0/8] Add support for UHS modes in TI's J721e and J7200
 boards

On 00:35-20201002, Faiz Abbas wrote:
> The following patches add support for UHS modes for TI's j721e and j7200
> boards.
> 
> Patches 1-3 add support for gpios to j7200-evm
> 
> Patches 4-6 add support for voltage regulators for required by the
> SD card in both devices as well as enable UHS modes at 1.8V
> 
> Patches 5-6 add some required configs to the arm64 defconfig.
> 
> This series depends on driver patches adding tuning support here:
> https://lore.kernel.org/linux-arm-kernel/20200923105206.7988-1-faiz_abbas@ti.com/
> 
> Faiz Abbas (8):
>   arm64: dts: ti: k3-j7200-main: Add gpio nodes in main domain
>   arm64: dts: ti: k3-j7200: Add gpio nodes in wakeup domain
>   arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio
>     modules
>   arm64: dts: ti: k3-j721e-main: Add output tap delay values
>   arm64: dts: ti: k3-j721e-common-proc-board: Add support SD card UHS
>     modes
>   arm64: dts: ti: k3-j7200-common-proc-board: Add support SD card UHS
>     modes

Split these up please!
>   arm64: defconfig: Enable OMAP I2C driver
>   arm64: defconfig: Enable DAVINCI_GPIO driver
> 

defconfig patches can be posted independent of dts patches, they go to
different branches.

Also, These are a little too late for 5.10 at this point.
>  .../dts/ti/k3-j7200-common-proc-board.dts     | 48 +++++++++++++
>  arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     | 69 ++++++++++++++++++-
>  .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      | 32 +++++++++
>  .../dts/ti/k3-j721e-common-proc-board.dts     | 35 +++++++++-
>  arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 22 ++++--
>  arch/arm64/configs/defconfig                  |  2 +
>  6 files changed, 201 insertions(+), 7 deletions(-)
> 
> -- 
> 2.17.1
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ