linux-kernel - [PATCH v2 RESEND 8/9] spi: spi-s3c64xx: Increase transfer timeout

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201001152148.29747-9-l.stelmach@samsung.com>
Date:   Thu,  1 Oct 2020 17:21:47 +0200
From:   Łukasz Stelmach <l.stelmach@...sung.com>
To:     Kukjin Kim <kgene@...nel.org>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        Tomasz Figa <tomasz.figa@...il.com>,
        Andi Shyti <andi@...zian.org>, Mark Brown <broonie@...nel.org>,
        linux-spi@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc:     m.szyprowski@...sung.com, b.zolnierkie@...sung.com,
        Łukasz Stelmach <l.stelmach@...sung.com>
Subject: [PATCH v2 RESEND 8/9] spi: spi-s3c64xx: Increase transfer timeout

Increase timeout by 30 ms for some wiggle room and set the minimum value
to 100 ms. This ensures a non-zero value for short transfers which
may take less than 1 ms. The timeout value does not affect
performance because it is used with a completion.

Similar formula is used in other drivers e.g. sun4i, sun6i.

Reviewed-by: Krzysztof Kozlowski <krzk@...nel.org>
Signed-off-by: Łukasz Stelmach <l.stelmach@...sung.com>
---
 drivers/spi/spi-s3c64xx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 89c162efe355..ea5a22dec53d 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -473,7 +473,8 @@ static int s3c64xx_wait_for_dma(struct s3c64xx_spi_driver_data *sdd,
 
 	/* millisecs to xfer 'len' bytes @ 'cur_speed' */
 	ms = xfer->len * 8 * 1000 / sdd->cur_speed;
-	ms += 10; /* some tolerance */
+	ms += 30;               /* some tolerance */
+	ms = max(ms, 100);      /* minimum timeout */
 
 	val = msecs_to_jiffies(ms) + 10;
 	val = wait_for_completion_timeout(&sdd->xfer_completion, val);
-- 
2.26.2