| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201001160154.3587848-2-enric.balletbo@collabora.com>
Date: Thu, 1 Oct 2020 18:01:43 +0200
From: Enric Balletbo i Serra <enric.balletbo@...labora.com>
To: linux-kernel@...r.kernel.org
Cc: Collabora Kernel ML <kernel@...labora.com>, fparent@...libre.com,
matthias.bgg@...il.com, drinkcat@...omium.org, hsinyi@...omium.org,
weiyi.lu@...iatek.com, Matthias Brugger <mbrugger@...e.com>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: [PATCH v2 01/12] dt-bindings: power: Add bindings for the Mediatek SCPSYS power domains controller
The System Control Processor System (SCPSYS) has several power management
related tasks in the system. Add the bindings to define the power
domains for the SCPSYS power controller.
Co-developed-by: Matthias Brugger <mbrugger@...e.com>
Signed-off-by: Matthias Brugger <mbrugger@...e.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>
---
Changes in v2:
- Use generic node names (power-domain).
- Define valid values for common properties like #power-domain-cells.
.../power/mediatek,power-controller.yaml | 182 ++++++++++++++++++
1 file changed, 182 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
new file mode 100644
index 000000000000..9ac7a7694d61
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/mediatek,power-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Power Domains Controller
+
+maintainers:
+ - Weiyi Lu <weiyi.lu@...iatek.com>
+ - Matthias Brugger <mbrugger@...e.com>
+
+description: |
+ Mediatek processors include support for multiple power domains which can be
+ powered up/down by software based on different application scenes to save power.
+
+ IP cores belonging to a power domain should contain a 'power-domains'
+ property that is a phandle for SCPSYS node representing the domain.
+
+properties:
+ $nodename:
+ const: power-controller
+
+ compatible:
+ enum:
+ - mediatek,mt8173-power-controller
+
+ '#power-domain-cells':
+ const: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "^power-domain@[0-9]$":
+ type: object
+ description: |
+ Represents the power domains within the power controller node as documented
+ in Documentation/devicetree/bindings/power/power-domain.yaml.
+
+ properties:
+
+ '#power-domain-cells':
+ description:
+ Must be 0 for nodes representing a single PM domain and 1 for nodes
+ providing multiple PM domains.
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ reg:
+ description: |
+ Power domain index. Valid values are defined in:
+ "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
+ maxItems: 1
+
+ clocks:
+ description: |
+ A number of phandles to clocks that need to be enabled during domain
+ power-up sequencing.
+
+ clock-names:
+ description: |
+ List of names of clocks, in order to match the power-up sequencing
+ for each power domain we need to group the clocks by name. BASIC
+ clocks need to be enabled before enabling the corresponding power
+ domain, and should not have a '-' in their name (i.e mm, mfg, venc).
+ SUSBYS clocks need to be enabled before releasing the bus protection,
+ and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
+
+ In order to follow properly the power-up sequencing, the clocks must
+ be specified by order, adding first the BASIC clocks followed by the
+ SUSBSYS clocks.
+
+ mediatek,infracfg:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description: phandle to the device containing the INFRACFG register range.
+
+ mediatek,smi:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description: phandle to the device containing the SMI register range.
+
+ required:
+ - reg
+ - '#power-domain-cells'
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ scpsys: syscon@...06000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0 0x10006000 0 0x1000>;
+
+ spm: power-controller {
+ compatible = "mediatek,mt8173-power-controller";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ /* power domains of the SoC */
+ power-domain@...173_POWER_DOMAIN_VDEC {
+ reg = <MT8173_POWER_DOMAIN_VDEC>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>;
+ clock-names = "mm";
+ #power-domain-cells = <0>;
+ };
+ power-domain@...173_POWER_DOMAIN_VENC {
+ reg = <MT8173_POWER_DOMAIN_VENC>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>,
+ <&topckgen CLK_TOP_VENC_SEL>;
+ clock-names = "mm", "venc";
+ #power-domain-cells = <0>;
+ };
+ power-domain@...173_POWER_DOMAIN_ISP {
+ reg = <MT8173_POWER_DOMAIN_ISP>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>;
+ clock-names = "mm";
+ #power-domain-cells = <0>;
+ };
+ power-domain@...173_POWER_DOMAIN_MM {
+ reg = <MT8173_POWER_DOMAIN_MM>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>;
+ clock-names = "mm";
+ #power-domain-cells = <0>;
+ mediatek,infracfg = <&infracfg>;
+ };
+ power-domain@...173_POWER_DOMAIN_VENC_LT {
+ reg = <MT8173_POWER_DOMAIN_VENC_LT>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>,
+ <&topckgen CLK_TOP_VENC_LT_SEL>;
+ clock-names = "mm", "venclt";
+ #power-domain-cells = <0>;
+ };
+ power-domain@...173_POWER_DOMAIN_AUDIO {
+ reg = <MT8173_POWER_DOMAIN_AUDIO>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@...173_POWER_DOMAIN_USB {
+ reg = <MT8173_POWER_DOMAIN_USB>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@...173_POWER_DOMAIN_MFG_ASYNC {
+ reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
+ clocks = <&clk26m>;
+ clock-names = "mfg";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ power-domain@...173_POWER_DOMAIN_MFG_2D {
+ reg = <MT8173_POWER_DOMAIN_MFG_2D>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ power-domain@...173_POWER_DOMAIN_MFG {
+ reg = <MT8173_POWER_DOMAIN_MFG>;
+ #power-domain-cells = <0>;
+ mediatek,infracfg = <&infracfg>;
+ };
+ };
+ };
+ };
+ };
+ };
--
2.28.0
Powered by blists - more mailing lists