2020-10-06 00:19:39 export USER=root 2020-10-06 00:19:39 ./build.sh Building TNC testing tools Building wlantest Building hs20-osu-client Building hostapd Building wpa_supplicant wpa_cli.c: In function ‘wpa_cli_cmd_all_bss’: wpa_cli.c:3105:3: warning: ‘ssid’ may be used uninitialized in this function [-Wmaybe-uninitialized] printf("%s\t%s\t%s\t%s\t%s\n", bssid, freq, level, flags, ssid); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ wpa_cli.c:3064:55: note: ‘ssid’ was declared here char buf[512], *pos, *bssid, *freq, *level, *flags, *ssid; ^~~~ wpa_cli.c:3105:3: warning: ‘flags’ may be used uninitialized in this function [-Wmaybe-uninitialized] printf("%s\t%s\t%s\t%s\t%s\n", bssid, freq, level, flags, ssid); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ wpa_cli.c:3064:47: note: ‘flags’ was declared here char buf[512], *pos, *bssid, *freq, *level, *flags, *ssid; ^~~~~ wpa_cli.c:3105:3: warning: ‘level’ may be used uninitialized in this function [-Wmaybe-uninitialized] printf("%s\t%s\t%s\t%s\t%s\n", bssid, freq, level, flags, ssid); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ wpa_cli.c:3064:39: note: ‘level’ was declared here char buf[512], *pos, *bssid, *freq, *level, *flags, *ssid; ^~~~~ wpa_cli.c:3105:3: warning: ‘freq’ may be used uninitialized in this function [-Wmaybe-uninitialized] printf("%s\t%s\t%s\t%s\t%s\n", bssid, freq, level, flags, ssid); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ wpa_cli.c:3064:32: note: ‘freq’ was declared here char buf[512], *pos, *bssid, *freq, *level, *flags, *ssid; ^~~~ wpa_cli.c:3105:3: warning: ‘bssid’ may be used uninitialized in this function [-Wmaybe-uninitialized] printf("%s\t%s\t%s\t%s\t%s\n", bssid, freq, level, flags, ssid); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ wpa_cli.c:3064:24: note: ‘bssid’ was declared here char buf[512], *pos, *bssid, *freq, *level, *flags, *ssid; ^~~~~ 2020-10-06 00:20:12 ./start.sh 2020-10-06 00:20:13 ./run-tests.py ap_ht40_plus_minus1 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht40_plus_minus1 1/1 Test: HT40 with both plus and minus allowed (1) Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht40_plus_minus1 1.660553 2020-10-06 00:20:16.360907 passed all 1 test case(s) 2020-10-06 00:20:16 ./run-tests.py ap_ht40_plus_minus2 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht40_plus_minus2 1/1 Test: HT40 with both plus and minus allowed (2) Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht40_plus_minus2 1.566636 2020-10-06 00:20:18.058372 passed all 1 test case(s) 2020-10-06 00:20:18 ./run-tests.py ap_ht40_scan DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht40_scan 1/1 Test: HT40 co-ex scan Starting AP wlan3 hostapd STATUS: {'state': 'ENABLED', 'phy': 'phy3', 'freq': '2432', 'num_sta_non_erp': '0', 'num_sta_no_short_slot_time': '0', 'num_sta_no_short_preamble': '0', 'olbc': '0', 'num_sta_ht_no_gf': '0', 'num_sta_no_ht': '0', 'num_sta_ht_20_mhz': '0', 'num_sta_ht40_intolerant': '0', 'olbc_ht': '0', 'ht_op_mode': '0x0', 'cac_time_seconds': '0', 'cac_time_left_seconds': 'N/A', 'channel': '5', 'edmg_enable': '0', 'edmg_channel': '0', 'secondary_channel': '-1', 'ieee80211n': '1', 'ieee80211ac': '0', 'ieee80211ax': '0', 'beacon_int': '100', 'dtim_period': '2', 'ht_caps_info': '000e', 'ht_mcs_bitmask': 'ffff0000000000000000', 'supported_rates': '02 04 0b 16 0c 12 18 24 30 48 60 6c', 'max_txpower': '20', 'bss[0]': 'wlan3', 'bssid[0]': '02:00:00:00:03:00', 'ssid[0]': 'test-ht40', 'num_sta[0]': '0'} Connect STA wlan0 to AP hostapd STA: {'addr': '02:00:00:00:00:00', 'flags': '[AUTH][ASSOC][AUTHORIZED][SHORT_PREAMBLE][WMM][HT]', 'aid': '1', 'capability': '0x421', 'listen_interval': '5', 'supported_rates': '02 04 0b 16 0c 12 18 24 30 48 60 6c', 'timeout_next': 'NULLFUNC POLL', 'rx_packets': '2', 'tx_packets': '2', 'rx_bytes': '127', 'tx_bytes': '169', 'inactive_msec': '11', 'signal': '-30', 'rx_rate_info': '0', 'tx_rate_info': '10', 'ht_mcs_bitmask': 'ffff0000000000000000', 'connected_time': '0', 'supp_op_classes': '5451525354737475767778797a7b7c7d7e7f808182', 'ht_caps_info': '0x107e', 'ext_capab': '04004a02014000400001'} STA SIGNAL_POLL: RSSI=-30 LINKSPEED=1 NOISE=-92 FREQUENCY=2432 WIDTH=40 MHz CENTER_FRQ1=2422 AVG_RSSI=-30 AVG_BEACON_RSSI=-30 PASS ap_ht40_scan 1.571853 2020-10-06 00:20:19.757736 passed all 1 test case(s) 2020-10-06 00:20:19 ./run-tests.py ap_ht40_scan_broken_ap DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht40_scan_broken_ap 1/1 Test: HT40 co-ex scan and broken legacy/HT AP Starting AP wlan4 Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP PASS ap_ht40_scan_broken_ap 1.801598 2020-10-06 00:20:21.690676 passed all 1 test case(s) 2020-10-06 00:20:21 ./run-tests.py ap_ht40_scan_conflict DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht40_scan_conflict 1/1 Test: HT40 co-ex scan conflict Starting AP wlan4 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht40_scan_conflict 2.921022 2020-10-06 00:20:24.741550 passed all 1 test case(s) 2020-10-06 00:20:24 ./run-tests.py ap_ht40_scan_conflict2 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht40_scan_conflict2 1/1 Test: HT40 co-ex scan conflict (HT40-) Starting AP wlan4 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht40_scan_conflict2 2.885341 2020-10-06 00:20:27.758608 passed all 1 test case(s) 2020-10-06 00:20:27 ./run-tests.py ap_ht40_scan_ht20_conflict DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht40_scan_ht20_conflict 1/1 Test: HT40 co-ex scan conflict with HT 20 MHz AP Starting AP wlan4 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht40_scan_ht20_conflict 1.671101 2020-10-06 00:20:29.558718 passed all 1 test case(s) 2020-10-06 00:20:29 ./run-tests.py ap_ht40_scan_intolerant DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht40_scan_intolerant 1/1 Test: HT40 co-ex scan finding an AP advertising 40 MHz intolerant Starting AP wlan4 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht40_scan_intolerant 1.626849 2020-10-06 00:20:31.318550 passed all 1 test case(s) 2020-10-06 00:20:31 ./run-tests.py ap_ht40_scan_legacy_conflict DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht40_scan_legacy_conflict 1/1 Test: HT40 co-ex scan conflict with legacy 20 MHz AP Starting AP wlan4 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht40_scan_legacy_conflict 1.626328 2020-10-06 00:20:33.074197 passed all 1 test case(s) 2020-10-06 00:20:33 ./run-tests.py ap_ht40_scan_match DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht40_scan_match 1/1 Test: HT40 co-ex scan matching configuration Starting AP wlan4 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht40_scan_match 2.907737 2020-10-06 00:20:36.113905 passed all 1 test case(s) 2020-10-06 00:20:36 ./run-tests.py ap_ht40_scan_not_affected DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht40_scan_not_affected 1/1 Test: HT40 co-ex scan and other BSS not affected Starting AP wlan4 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht40_scan_not_affected 2.283673 2020-10-06 00:20:38.526683 passed all 1 test case(s) 2020-10-06 00:20:38 ./run-tests.py ap_ht_20_to_40_csa DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_20_to_40_csa 1/1 Test: HT with 20 MHz channel width doing CSA to 40 MHz Starting AP wlan3 Connect STA wlan0 to AP SIGNAL_POLL: RSSI=-30 LINKSPEED=1 NOISE=9999 FREQUENCY=2412 WIDTH=20 MHz CENTER_FRQ1=2412 AVG_RSSI=-30 AVG_BEACON_RSSI=-30 SIGNAL_POLL: RSSI=-30 LINKSPEED=6 NOISE=9999 FREQUENCY=2462 WIDTH=40 MHz CENTER_FRQ1=2452 AVG_RSSI=-30 AVG_BEACON_RSSI=-30 PASS ap_ht_20_to_40_csa 1.06104 2020-10-06 00:20:39.719750 passed all 1 test case(s) 2020-10-06 00:20:39 ./run-tests.py ap_ht_40mhz_intolerant_ap DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_40mhz_intolerant_ap 1/1 Test: Associated STA reports 40 MHz intolerant AP after association Starting AP wlan3 Connect STA wlan0 to AP Start 40 MHz intolerant AP Starting AP wlan4 Waiting for co-ex report from STA AP moved to 20 MHz channel Waiting for AP to move back to 40 MHz channel AP moved to 40 MHz channel PASS ap_ht_40mhz_intolerant_ap 29.417817 2020-10-06 00:21:09.265245 passed all 1 test case(s) 2020-10-06 00:21:09 ./run-tests.py ap_ht_40mhz_intolerant_sta DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_40mhz_intolerant_sta 1/1 Test: Associated STA indicating 40 MHz intolerant Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan2 to AP PASS ap_ht_40mhz_intolerant_sta 3.662032 2020-10-06 00:21:13.052473 passed all 1 test case(s) 2020-10-06 00:21:13 ./run-tests.py ap_ht_40mhz_intolerant_sta_deinit DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_40mhz_intolerant_sta_deinit 1/1 Test: Associated STA indicating 40 MHz intolerant and hostapd deinit Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht_40mhz_intolerant_sta_deinit 2.532171 2020-10-06 00:21:15.713843 passed all 1 test case(s) 2020-10-06 00:21:15 ./run-tests.py ap_ht_capab_not_supported DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_capab_not_supported 1/1 Test: HT configuration with driver not supporting all ht_capab entries Starting AP wlan3 PASS ap_ht_capab_not_supported 0.069088 2020-10-06 00:21:15.910679 passed all 1 test case(s) 2020-10-06 00:21:15 ./run-tests.py ap_ht_op_class_115 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_op_class_115 1/1 Test: HT20 on operationg class 115 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht_op_class_115 0.538088 2020-10-06 00:21:16.576243 passed all 1 test case(s) 2020-10-06 00:21:16 ./run-tests.py ap_ht_op_class_116 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_op_class_116 1/1 Test: HT40 on operationg class 116 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht_op_class_116 0.734575 2020-10-06 00:21:17.440038 passed all 1 test case(s) 2020-10-06 00:21:17 ./run-tests.py ap_ht_op_class_117 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_op_class_117 1/1 Test: HT40 on operationg class 117 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht_op_class_117 0.782293 2020-10-06 00:21:18.351760 passed all 1 test case(s) 2020-10-06 00:21:18 ./run-tests.py ap_ht_op_class_118 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_op_class_118 1/1 Test: HT20 on operationg class 118 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht_op_class_118 0.54401 2020-10-06 00:21:19.025257 passed all 1 test case(s) 2020-10-06 00:21:19 ./run-tests.py ap_ht_op_class_119 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_op_class_119 1/1 Test: HT40 on operationg class 119 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht_op_class_119 0.736062 2020-10-06 00:21:19.887506 passed all 1 test case(s) 2020-10-06 00:21:19 ./run-tests.py ap_ht_op_class_120 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_op_class_120 1/1 Test: HT40 on operationg class 120 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht_op_class_120 0.772984 2020-10-06 00:21:20.786660 passed all 1 test case(s) 2020-10-06 00:21:20 ./run-tests.py ap_ht_op_class_121 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_op_class_121 1/1 Test: HT20 on operationg class 121 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht_op_class_121 0.550145 2020-10-06 00:21:21.466037 passed all 1 test case(s) 2020-10-06 00:21:21 ./run-tests.py ap_ht_op_class_122 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_op_class_122 1/1 Test: HT40 on operationg class 122 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht_op_class_122 0.743331 2020-10-06 00:21:22.337250 passed all 1 test case(s) 2020-10-06 00:21:22 ./run-tests.py ap_ht_op_class_123 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_op_class_123 1/1 Test: HT40 on operationg class 123 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht_op_class_123 0.773732 2020-10-06 00:21:23.234447 passed all 1 test case(s) 2020-10-06 00:21:23 ./run-tests.py ap_ht_op_class_124 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_op_class_124 1/1 Test: HT20 on operationg class 124 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht_op_class_124 0.536672 2020-10-06 00:21:23.896593 passed all 1 test case(s) 2020-10-06 00:21:23 ./run-tests.py ap_ht_op_class_125 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_op_class_125 1/1 Test: HT20 on operationg class 125 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht_op_class_125 0.539368 2020-10-06 00:21:24.561834 passed all 1 test case(s) 2020-10-06 00:21:24 ./run-tests.py ap_ht_op_class_126 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_op_class_126 1/1 Test: HT40 on operationg class 126 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht_op_class_126 0.786429 2020-10-06 00:21:25.477133 passed all 1 test case(s) 2020-10-06 00:21:25 ./run-tests.py ap_ht_op_class_127 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_op_class_127 1/1 Test: HT40 on operationg class 127 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht_op_class_127 0.770455 2020-10-06 00:21:26.371809 passed all 1 test case(s) 2020-10-06 00:21:26 ./run-tests.py ap_ht_op_class_81 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_op_class_81 1/1 Test: HT20 on operationg class 81 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht_op_class_81 0.535994 2020-10-06 00:21:27.034851 passed all 1 test case(s) 2020-10-06 00:21:27 ./run-tests.py ap_ht_op_class_83 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_op_class_83 1/1 Test: HT40 on operationg class 83 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht_op_class_83 1.743713 2020-10-06 00:21:28.906299 passed all 1 test case(s) 2020-10-06 00:21:28 ./run-tests.py ap_ht_op_class_84 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_op_class_84 1/1 Test: HT40 on operationg class 84 Starting AP wlan3 Connect STA wlan0 to AP PASS ap_ht_op_class_84 1.774752 2020-10-06 00:21:30.808787 passed all 1 test case(s) 2020-10-06 00:21:30 ./run-tests.py ap_ht_stbc DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_stbc 1/1 Test: HT STBC overrides Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP Connect STA wlan2 to AP PASS ap_ht_stbc 0.416831 2020-10-06 00:21:31.354488 passed all 1 test case(s) 2020-10-06 00:21:31 ./run-tests.py ap_ht_wifi_generation DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_wifi_generation 1/1 Test: HT and wifi_generation Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan5 to AP PASS ap_ht_wifi_generation 0.494203 2020-10-06 00:21:31.973890 passed all 1 test case(s) 2020-10-06 00:21:31 ./run-tests.py ap_ht_wmm_etsi DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_wmm_etsi 1/1 Test: HT and WMM contents in ETSI Starting AP wlan3 Connect STA wlan0 to AP WMM AC info: [(3, 164, 0), (39, 164, 0), (66, 67, 94), (98, 50, 47)] AIFSN: (3, 7, 2, 2) ECW min: (4, 4, 3, 2) ECW max: (10, 10, 4, 3) TXOP: (0, 0, 94, 47) PASS ap_ht_wmm_etsi 0.511672 2020-10-06 00:21:32.611570 passed all 1 test case(s) 2020-10-06 00:21:32 ./run-tests.py ap_ht_wmm_fcc DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_ht_wmm_fcc 1/1 Test: HT and WMM contents in FCC Starting AP wlan3 Connect STA wlan0 to AP WMM AC info: [(3, 164, 0), (39, 164, 0), (66, 67, 94), (98, 50, 47)] AIFSN: (3, 7, 2, 2) ECW min: (4, 4, 3, 2) ECW max: (10, 10, 4, 3) TXOP: (0, 0, 94, 47) PASS ap_ht_wmm_fcc 0.477814 2020-10-06 00:21:33.217209 passed all 1 test case(s) 2020-10-06 00:21:33 ./run-tests.py ap_inactivity_disconnect DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_inactivity_disconnect 1/1 Test: AP using inactivity disconnect Starting AP wlan3 Connect STA wlan0 to AP PASS ap_inactivity_disconnect 15.199271 2020-10-06 00:21:48.541705 passed all 1 test case(s) 2020-10-06 00:21:48 ./run-tests.py ap_inactivity_poll DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_inactivity_poll 1/1 Test: AP using inactivity poll Starting AP wlan3 Connect STA wlan0 to AP PASS ap_inactivity_poll 19.149882 2020-10-06 00:22:07.818461 passed all 1 test case(s) 2020-10-06 00:22:07 ./run-tests.py ap_interworking_element_update DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_interworking_element_update 1/1 Test: Dynamic Interworking element update Starting AP wlan3 Before update: {'id': '40', 'bssid': '02:00:00:00:03:00', 'freq': '2412', 'beacon_int': '100', 'capabilities': '0x0411', 'qual': '0', 'noise': '-89', 'level': '-30', 'tsf': '1601943728025798', 'age': '0', 'ie': '0009746573742d68733230010882848b960c1218240301012a010432043048606c30140100000fac040100000fac040100000fac018c003b0251002d1a0c001bffff0000000000000000000001000000000000000000003d16010000000000000000000000000000000000000000007f0804004082004000406b091e07010200000003006c027f006f1001531122331020304050010203040506dd180050f2020101010003a4000027a4000042435e0062322f00dd07506f9a10240000', 'flags': '[WPA2-EAP-CCMP][ESS][HS20]', 'ssid': 'test-hs20', 'snr': '59', 'est_throughput': '65000', 'update_idx': '44', 'beacon_ie': '0009746573742d68733230010882848b960c1218240301010504000200002a010432043048606c30140100000fac040100000fac040100000fac018c003b0251002d1a0c001bffff0000000000000000000001000000000000000000003d16010000000000000000000000000000000000000000007f0804004082004000406b091e07010200000003006c027f006f1001531122331020304050010203040506dd180050f2020101010003a4000027a4000042435e0062322f00dd07506f9a10240000'} After update: {'id': '41', 'bssid': '02:00:00:00:03:00', 'freq': '2412', 'beacon_int': '100', 'capabilities': '0x0411', 'qual': '0', 'noise': '-89', 'level': '-30', 'tsf': '1601943728043166', 'age': '0', 'ie': '0009746573742d68733230010882848b960c1218240301012a010432043048606c30140100000fac040100000fac040100000fac018c003b0251002d1a0c001bffff0000000000000000000001000000000000000000003d16010000000000000000000000000000000000000000007f0804004082004000406b09f202080200000003006c027f006f1001531122331020304050010203040506dd180050f2020101010003a4000027a4000042435e0062322f00dd07506f9a10240000', 'flags': '[WPA2-EAP-CCMP][ESS][HS20]', 'ssid': 'test-hs20', 'snr': '59', 'est_throughput': '65000', 'update_idx': '45', 'beacon_ie': '0009746573742d68733230010882848b960c1218240301010504000200002a010432043048606c30140100000fac040100000fac040100000fac018c003b0251002d1a0c001bffff0000000000000000000001000000000000000000003d16010000000000000000000000000000000000000000007f0804004082004000406b091e07010200000003006c027f006f1001531122331020304050010203040506dd180050f2020101010003a4000027a4000042435e0062322f00dd07506f9a10240000'} PASS ap_interworking_element_update 0.177857 2020-10-06 00:22:08.122101 passed all 1 test case(s) 2020-10-06 00:22:08 ./run-tests.py ap_interworking_scan_filtering DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_interworking_scan_filtering 1/1 Test: Interworking scan filtering with HESSID and access network type Starting AP wlan3 Starting AP wlan4 Check probe request filtering based on HESSID Check probe request filtering based on access network type Check probe request filtering based on HESSID and ANT PASS ap_interworking_scan_filtering 0.622852 2020-10-06 00:22:08.874875 passed all 1 test case(s) 2020-10-06 00:22:08 ./run-tests.py ap_invalid_config DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_invalid_config 1/1 Test: Try to start AP with invalid configuration and fix configuration Trying to start AP wlan3 with invalid configuration Starting AP wlan3 Fix configuration and start AP again Connect STA wlan0 to AP PASS ap_invalid_config 0.220632 2020-10-06 00:22:09.225639 passed all 1 test case(s) 2020-10-06 00:22:09 ./run-tests.py ap_invalid_config2 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_invalid_config2 1/1 Test: Try to start AP with invalid configuration and remove interface Trying to start AP wlan3 with invalid configuration Starting AP wlan3 Remove interface with failed configuration Removing BSS wlan3 PASS ap_invalid_config2 0.060349 2020-10-06 00:22:09.415093 passed all 1 test case(s) 2020-10-06 00:22:09 ./run-tests.py ap_long_preamble DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_long_preamble 1/1 Test: AP with long preamble Starting AP wlan3 Failed to enable hostapd interface wlan3 Traceback (most recent call last): File "./run-tests.py", line 533, in main t(dev, apdev) File "/lkp/benchmarks/hwsim/tests/hwsim/test_ap_params.py", line 821, in test_ap_long_preamble hapd = hostapd.add_ap(apdev[0], params) File "/lkp/benchmarks/hwsim/tests/hwsim/hostapd.py", line 581, in add_ap hapd.enable() File "/lkp/benchmarks/hwsim/tests/hwsim/hostapd.py", line 248, in enable raise Exception("Failed to enable hostapd interface " + self.ifname) Exception: Failed to enable hostapd interface wlan3 FAIL ap_long_preamble 0.064398 2020-10-06 00:22:09.608978 passed 0 test case(s) skipped 0 test case(s) failed tests: ap_long_preamble 2020-10-06 00:22:09 ./run-tests.py ap_max_listen_interval DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_max_listen_interval 1/1 Test: Open AP with maximum listen interval limit Starting AP wlan3 Connect STA wlan0 to AP PASS ap_max_listen_interval 0.140831 2020-10-06 00:22:09.879566 passed all 1 test case(s) 2020-10-06 00:22:09 ./run-tests.py ap_max_num_sta DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_max_num_sta 1/1 Test: Open AP with maximum STA count Starting AP wlan3 Connect STA wlan1 to AP Connect STA wlan0 to AP PASS ap_max_num_sta 1.179785 2020-10-06 00:22:11.188481 passed all 1 test case(s) 2020-10-06 00:22:11 ./run-tests.py ap_max_num_sta_no_probe_resp DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_max_num_sta_no_probe_resp 1/1 Test: Maximum STA count and limit on Probe Response frames Starting AP wlan3 Connect STA wlan1 to AP PASS ap_max_num_sta_no_probe_resp 0.349019 2020-10-06 00:22:11.665991 passed all 1 test case(s) 2020-10-06 00:22:11 ./run-tests.py ap_missing_psk DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_missing_psk 1/1 Test: WPA2-PSK AP and no PSK configured Starting AP wlan3 PASS ap_missing_psk 0.028275 2020-10-06 00:22:11.823829 passed all 1 test case(s) 2020-10-06 00:22:11 ./run-tests.py ap_mixed_security DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_mixed_security 1/1 Test: WPA/WPA2 with PSK, EAP, SAE, FT in a single BSS Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP Connect STA wlan2 to AP Connect STA wlan0 to AP Connect STA wlan1 to AP Connect STA wlan2 to AP Connect STA wlan0 to AP Connect STA wlan1 to AP Connect STA wlan2 to AP PASS ap_mixed_security 1.072632 2020-10-06 00:22:13.025218 passed all 1 test case(s) 2020-10-06 00:22:13 ./run-tests.py ap_multi_bss DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_multi_bss 1/1 Test: Multiple BSSes with hostapd Starting BSS phy=phy3 ifname=wlan3 Starting BSS phy=phy3 ifname=wlan3-2 Connect STA wlan0 to AP Connect STA wlan1 to AP PASS ap_multi_bss 0.40931 2020-10-06 00:22:13.562044 passed all 1 test case(s) 2020-10-06 00:22:13 ./run-tests.py ap_multi_bss_acs DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_multi_bss_acs 1/1 Test: hostapd start with a multi-BSS configuration file using ACS Starting AP wlan3 Removing BSS wlan3 Starting interface wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP Connect STA wlan2 to AP PASS ap_multi_bss_acs 7.153959 2020-10-06 00:22:20.844611 passed all 1 test case(s) 2020-10-06 00:22:20 ./run-tests.py ap_multi_bss_config DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_multi_bss_config 1/1 Test: hostapd start with a multi-BSS configuration file Set up three BSSes with one configuration file Starting interface wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP Connect STA wlan2 to AP Removing BSS wlan3-2 Connect STA wlan1 to AP Connect STA wlan0 to AP Connect STA wlan2 to AP Removing BSS wlan3-3 Connect STA wlan1 to AP Connect STA wlan2 to AP Connect STA wlan0 to AP Removing BSS wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP Connect STA wlan2 to AP Starting interface wlan3 Removing BSS wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP Connect STA wlan2 to AP PASS ap_multi_bss_config 2.091983 2020-10-06 00:22:23.066007 passed all 1 test case(s) 2020-10-06 00:22:23 ./run-tests.py ap_nai_home_realm_query DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_nai_home_realm_query 1/1 Test: NAI Home Realm Query Starting AP wlan3 PASS ap_nai_home_realm_query 0.251605 2020-10-06 00:22:23.444454 passed all 1 test case(s) 2020-10-06 00:22:23 ./run-tests.py ap_no_auth_ack DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_no_auth_ack 1/1 Test: AP not receiving Authentication frame ACK Starting AP wlan3 PASS ap_no_auth_ack 1.090759 2020-10-06 00:22:24.663633 passed all 1 test case(s) 2020-10-06 00:22:24 ./run-tests.py ap_no_probe_resp DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_no_probe_resp 1/1 Test: AP with Probe Response frame sending from hostapd disabled Starting AP wlan3 Connect STA wlan0 to AP PASS ap_no_probe_resp 0.300813 2020-10-06 00:22:25.093731 passed all 1 test case(s) 2020-10-06 00:22:25 ./run-tests.py ap_open DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open 1/1 Test: AP with open mode (no security) configuration Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open 0.22725 2020-10-06 00:22:25.449319 passed all 1 test case(s) 2020-10-06 00:22:25 ./run-tests.py ap_open_assoc_timeout DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_assoc_timeout 1/1 Test: AP timing out association Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_assoc_timeout 0.661476 2020-10-06 00:22:26.239206 passed all 1 test case(s) 2020-10-06 00:22:26 ./run-tests.py ap_open_auth_drop_sta DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_auth_drop_sta 1/1 Test: AP dropping station after successful authentication Starting AP wlan3 (old add_ap argument type) Connect STA wlan0 to AP PASS ap_open_auth_drop_sta 0.348988 2020-10-06 00:22:26.716096 passed all 1 test case(s) 2020-10-06 00:22:26 ./run-tests.py ap_open_country_indoor DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_country_indoor 1/1 Test: AP with open mode and indoor country code Starting AP wlan3 Connect STA wlan0 to AP Country code at the end: 00 PASS ap_open_country_indoor 0.451824 2020-10-06 00:22:27.298458 passed all 1 test case(s) 2020-10-06 00:22:27 ./run-tests.py ap_open_country_outdoor DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_country_outdoor 1/1 Test: AP with open mode and outdoor country code Starting AP wlan3 Connect STA wlan0 to AP Country code at the end: 00 PASS ap_open_country_outdoor 0.456472 2020-10-06 00:22:27.883162 passed all 1 test case(s) 2020-10-06 00:22:27 ./run-tests.py ap_open_country_table_e4 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_country_table_e4 1/1 Test: AP with open mode and Table E-4 Country String Starting AP wlan3 Connect STA wlan0 to AP Country code at the end: 00 PASS ap_open_country_table_e4 0.47148 2020-10-06 00:22:28.482400 passed all 1 test case(s) 2020-10-06 00:22:28 ./run-tests.py ap_open_disable_enable DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_disable_enable 1/1 Test: AP with open mode getting disabled and re-enabled Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_disable_enable 0.651605 2020-10-06 00:22:29.261766 passed all 1 test case(s) 2020-10-06 00:22:29 ./run-tests.py ap_open_disable_select DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_disable_select 1/1 Test: DISABLE_NETWORK for connected AP followed by SELECT_NETWORK Starting AP wlan3 Starting AP wlan4 Connect STA wlan0 to AP PASS ap_open_disable_select 0.284864 2020-10-06 00:22:29.674976 passed all 1 test case(s) 2020-10-06 00:22:29 ./run-tests.py ap_open_disconnect_in_ps DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_disconnect_in_ps 1/1 Test: Disconnect with the client in PS to regression-test a kernel bug Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_disconnect_in_ps 1.255091 2020-10-06 00:22:31.059772 passed all 1 test case(s) 2020-10-06 00:22:31 ./run-tests.py ap_open_drop_duplicate DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_drop_duplicate 1/1 Test: AP dropping duplicate management frames Starting AP wlan3 PASS ap_open_drop_duplicate 0.362037 2020-10-06 00:22:31.550878 passed all 1 test case(s) 2020-10-06 00:22:31 ./run-tests.py ap_open_drv_fail DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_drv_fail 1/1 Test: AP with open mode and driver operations failing Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan0 to AP PASS ap_open_drv_fail 0.239601 2020-10-06 00:22:31.919623 passed all 1 test case(s) 2020-10-06 00:22:31 ./run-tests.py ap_open_external_assoc DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_external_assoc 1/1 Test: AP with open mode and external association Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_external_assoc 0.189941 2020-10-06 00:22:32.236765 passed all 1 test case(s) 2020-10-06 00:22:32 ./run-tests.py ap_open_id_str DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_id_str 1/1 Test: AP with open mode and id_str Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_id_str 0.184187 2020-10-06 00:22:32.547748 passed all 1 test case(s) 2020-10-06 00:22:32 ./run-tests.py ap_open_ifdown DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_ifdown 1/1 Test: AP with open mode and external ifconfig down Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP PASS ap_open_ifdown 0.49595 2020-10-06 00:22:33.172503 passed all 1 test case(s) 2020-10-06 00:22:33 ./run-tests.py ap_open_invalid_wmm_action DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_invalid_wmm_action 1/1 Test: AP with open mode configuration and invalid WMM Action frame Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_invalid_wmm_action 0.166574 2020-10-06 00:22:33.467601 passed all 1 test case(s) 2020-10-06 00:22:33 ./run-tests.py ap_open_layer_2_update DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_layer_2_update 1/1 Test: AP with open mode (no security) and Layer 2 Update frame Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_layer_2_update 2.947648 2020-10-06 00:22:36.543234 passed all 1 test case(s) 2020-10-06 00:22:36 ./run-tests.py ap_open_multicast_to_unicast DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_multicast_to_unicast 1/1 Test: Multicast-to-unicast conversion enabled Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_multicast_to_unicast 0.293953 2020-10-06 00:22:36.968517 passed all 1 test case(s) 2020-10-06 00:22:36 ./run-tests.py ap_open_multicast_to_unicast_disabled DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_multicast_to_unicast_disabled 1/1 Test: Multicast-to-unicast conversion disabled Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_multicast_to_unicast_disabled 0.19309 2020-10-06 00:22:37.289241 passed all 1 test case(s) 2020-10-06 00:22:37 ./run-tests.py ap_open_no_reflection DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_no_reflection 1/1 Test: AP with open mode, STA sending packets to itself Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_no_reflection 1.220651 2020-10-06 00:22:38.636736 passed all 1 test case(s) 2020-10-06 00:22:38 ./run-tests.py ap_open_noncountry DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_noncountry 1/1 Test: AP with open mode and noncountry entity as Country String Starting AP wlan3 Connect STA wlan0 to AP Country code at the end: 00 PASS ap_open_noncountry 6.448796 2020-10-06 00:22:45.210337 passed all 1 test case(s) 2020-10-06 00:22:45 ./run-tests.py ap_open_out_of_memory DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_out_of_memory 1/1 Test: hostapd failing to setup interface due to allocation failure Starting AP wlan3 Starting AP wlan4 Starting AP wlan4 Starting AP wlan4 Starting AP wlan4 Starting AP wlan4 Starting AP wlan4 Starting AP wlan4 Starting AP wlan4 Starting AP wlan4 Starting AP wlan4 Starting AP wlan4 Starting AP wlan4 PASS ap_open_out_of_memory 0.170993 2020-10-06 00:22:45.508724 passed all 1 test case(s) 2020-10-06 00:22:45 ./run-tests.py ap_open_packet_loss DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_packet_loss 1/1 Test: AP with open mode configuration and large packet loss Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP Connect STA wlan2 to AP PASS ap_open_packet_loss 1.65433 2020-10-06 00:22:47.289234 passed all 1 test case(s) 2020-10-06 00:22:47 ./run-tests.py ap_open_per_sta_vif DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_per_sta_vif 1/1 Test: AP VLAN with open network Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_per_sta_vif 0.231071 2020-10-06 00:22:47.645511 passed all 1 test case(s) 2020-10-06 00:22:47 ./run-tests.py ap_open_pmf_default DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_pmf_default 1/1 Test: AP with open mode (no security) configuration and pmf=2 Starting AP wlan3 Connect STA wlan1 to AP Connect STA wlan2 to AP Connect STA wlan0 to AP PASS ap_open_pmf_default 0.345086 2020-10-06 00:22:48.116797 passed all 1 test case(s) 2020-10-06 00:22:48 ./run-tests.py ap_open_poll_sta DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_poll_sta 1/1 Test: AP with open mode and STA poll Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_poll_sta 0.179158 2020-10-06 00:22:48.420633 passed all 1 test case(s) 2020-10-06 00:22:48 ./run-tests.py ap_open_poll_sta_no_ack DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_poll_sta_no_ack 1/1 Test: AP with open mode and STA poll without ACK Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_poll_sta_no_ack 1.166168 2020-10-06 00:22:49.714031 passed all 1 test case(s) 2020-10-06 00:22:49 ./run-tests.py ap_open_ps_mc_buf DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_ps_mc_buf 1/1 Test: Multicast buffering with a station in power save Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_ps_mc_buf 0.812994 2020-10-06 00:22:50.651376 passed all 1 test case(s) 2020-10-06 00:22:50 ./run-tests.py ap_open_reassoc_not_found DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_reassoc_not_found 1/1 Test: AP with open mode and REASSOCIATE not finding a match Connect STA wlan0 to AP PASS ap_open_reassoc_not_found 0.201464 2020-10-06 00:22:50.979645 passed all 1 test case(s) 2020-10-06 00:22:51 ./run-tests.py ap_open_reassoc_same DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_reassoc_same 1/1 Test: AP with open mode and STA reassociating back to same AP without auth exchange Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_reassoc_same 0.252662 2020-10-06 00:22:51.359374 passed all 1 test case(s) 2020-10-06 00:22:51 ./run-tests.py ap_open_reconnect_on_inactivity_disconnect DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_reconnect_on_inactivity_disconnect 1/1 Test: Reconnect to open mode AP after inactivity related disconnection Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_reconnect_on_inactivity_disconnect 0.230372 2020-10-06 00:22:51.715224 passed all 1 test case(s) 2020-10-06 00:22:51 ./run-tests.py ap_open_select_any DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_select_any 1/1 Test: AP with open mode and select any network Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan0 to AP PASS ap_open_select_any 0.162493 2020-10-06 00:22:52.001577 passed all 1 test case(s) 2020-10-06 00:22:52 ./run-tests.py ap_open_select_network DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_select_network 1/1 Test: Open mode connection and SELECT_NETWORK to change network Starting AP wlan3 Starting AP wlan4 Connect STA wlan0 to AP Connect STA wlan0 to AP PASS ap_open_select_network 0.430396 2020-10-06 00:22:52.558112 passed all 1 test case(s) 2020-10-06 00:22:52 ./run-tests.py ap_open_select_network_freq DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_select_network_freq 1/1 Test: AP with open mode and use for SELECT_NETWORK freq parameter Starting AP wlan3 Connect STA wlan0 to AP Scan duration: 0.0400000000372529 seconds PASS ap_open_select_network_freq 0.187298 2020-10-06 00:22:52.869722 passed all 1 test case(s) 2020-10-06 00:22:52 ./run-tests.py ap_open_select_twice DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_select_twice 1/1 Test: AP with open mode and select network twice Connect STA wlan0 to AP Starting AP wlan3 PASS ap_open_select_twice 0.19628 2020-10-06 00:22:53.192337 passed all 1 test case(s) 2020-10-06 00:22:53 ./run-tests.py ap_open_sta_enable_disable DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_sta_enable_disable 1/1 Test: AP with open mode and wpa_supplicant ENABLE/DISABLE_NETWORK Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan5 to AP PASS ap_open_sta_enable_disable 0.462336 2020-10-06 00:22:53.780925 passed all 1 test case(s) 2020-10-06 00:22:53 ./run-tests.py ap_open_sta_ps DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_sta_ps 1/1 Test: Station power save operation Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_sta_ps 0.672829 2020-10-06 00:22:54.581888 passed all 1 test case(s) 2020-10-06 00:22:54 ./run-tests.py ap_open_sta_statistics DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_sta_statistics 1/1 Test: AP with open mode and STA statistics Starting AP wlan3 Connect STA wlan0 to AP stats1: {'addr': '02:00:00:00:00:00', 'flags': '[AUTH][ASSOC][AUTHORIZED][SHORT_PREAMBLE][WMM][HT]', 'aid': '1', 'capability': '0x421', 'listen_interval': '5', 'supported_rates': '02 04 0b 16 0c 12 18 24 30 48 60 6c', 'timeout_next': 'NULLFUNC POLL', 'rx_packets': '2', 'tx_packets': '2', 'rx_bytes': '122', 'tx_bytes': '169', 'inactive_msec': '11', 'signal': '-30', 'rx_rate_info': '0', 'tx_rate_info': '10', 'ht_mcs_bitmask': 'ffff0000000000000000', 'connected_time': '0', 'supp_op_classes': '5151525354737475767778797a7b7c7d7e7f808182', 'ht_caps_info': '0x107e', 'ext_capab': '04004a82014000400001'} stats2: {'addr': '02:00:00:00:00:00', 'flags': '[AUTH][ASSOC][AUTHORIZED][SHORT_PREAMBLE][WMM][HT]', 'aid': '1', 'capability': '0x421', 'listen_interval': '5', 'supported_rates': '02 04 0b 16 0c 12 18 24 30 48 60 6c', 'timeout_next': 'NULLFUNC POLL', 'rx_packets': '5', 'tx_packets': '3', 'rx_bytes': '265', 'tx_bytes': '202', 'inactive_msec': '392', 'signal': '-30', 'rx_rate_info': '0', 'tx_rate_info': '10', 'ht_mcs_bitmask': 'ffff0000000000000000', 'connected_time': '0', 'supp_op_classes': '5151525354737475767778797a7b7c7d7e7f808182', 'ht_caps_info': '0x107e', 'ext_capab': '04004a82014000400001'} stats3: {'addr': '02:00:00:00:00:00', 'flags': '[AUTH][ASSOC][AUTHORIZED][SHORT_PREAMBLE][WMM][HT]', 'aid': '1', 'capability': '0x421', 'listen_interval': '5', 'supported_rates': '02 04 0b 16 0c 12 18 24 30 48 60 6c', 'timeout_next': 'NULLFUNC POLL', 'rx_packets': '9', 'tx_packets': '5', 'rx_bytes': '3338', 'tx_bytes': '1755', 'inactive_msec': '12', 'signal': '-30', 'rx_rate_info': '0', 'tx_rate_info': '65 mcs 0', 'ht_mcs_bitmask': 'ffff0000000000000000', 'connected_time': '0', 'supp_op_classes': '5151525354737475767778797a7b7c7d7e7f808182', 'ht_caps_info': '0x107e', 'ext_capab': '04004a82014000400001'} PASS ap_open_sta_statistics 0.60744 2020-10-06 00:22:55.317818 passed all 1 test case(s) 2020-10-06 00:22:55 ./run-tests.py ap_open_start_disabled DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_start_disabled 1/1 Test: AP with open mode and beaconing disabled Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_start_disabled 0.287086 2020-10-06 00:22:55.733567 passed all 1 test case(s) 2020-10-06 00:22:55 ./run-tests.py ap_open_start_disabled2 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_start_disabled2 1/1 Test: AP with open mode and beaconing disabled (2) Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_start_disabled2 0.327372 2020-10-06 00:22:56.190717 passed all 1 test case(s) 2020-10-06 00:22:56 ./run-tests.py ap_open_tdls DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_tdls 1/1 Test: Open AP and two stations using TDLS Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP Setup TDLS Teardown TDLS Setup TDLS Teardown TDLS PASS ap_open_tdls 5.532339 2020-10-06 00:23:01.850281 passed all 1 test case(s) 2020-10-06 00:23:01 ./run-tests.py ap_open_tdls_external_control DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_tdls_external_control 1/1 Test: TDLS and tdls_external_control Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP PASS ap_open_tdls_external_control 0.361267 2020-10-06 00:23:02.340629 passed all 1 test case(s) 2020-10-06 00:23:02 ./run-tests.py ap_open_tdls_vht DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_tdls_vht 1/1 Test: Open AP and two stations using TDLS Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP Setup TDLS Teardown TDLS Setup TDLS Teardown TDLS PASS ap_open_tdls_vht 5.793661 2020-10-06 00:23:08.263603 passed all 1 test case(s) 2020-10-06 00:23:08 ./run-tests.py ap_open_tdls_vht160 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_tdls_vht160 1/1 Test: Open AP and two stations using TDLS with VHT 160 Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP Setup TDLS Station dump on dev[0]: Station 02:00:00:00:03:00 (on wlan0) inactive time: 22 ms rx bytes: 150708 rx packets: 171 tx bytes: 64842 tx packets: 55 tx retries: 0 tx failed: 0 beacon loss: 0 beacon rx: 26 rx drop misc: 31 signal: -20 dBm signal avg: -20 dBm beacon signal avg: -20 dBm tx bitrate: 6.5 MBit/s VHT-MCS 0 VHT-NSS 1 rx bitrate: 6.0 MBit/s rx duration: 0 us expected throughput: 4.394Mbps authorized: yes authenticated: yes associated: yes preamble: long WMM/WME: yes MFP: no TDLS peer: no DTIM period: 2 beacon interval:100 short slot time:yes connected time: 3 seconds Station 02:00:00:00:01:00 (on wlan0) inactive time: 91 ms rx bytes: 18306 rx packets: 16 tx bytes: 18306 tx packets: 14 tx retries: 0 tx failed: 0 beacon loss: 0 beacon rx: 26 rx drop misc: 0 signal: -20 dBm signal avg: -20 dBm beacon signal avg: -20 dBm tx bitrate: 6.5 MBit/s VHT-MCS 0 VHT-NSS 1 rx duration: 0 us expected throughput: 4.394Mbps authorized: yes authenticated: yes associated: yes preamble: long WMM/WME: yes MFP: no TDLS peer: yes DTIM period: 2 beacon interval:100 short slot time:yes connected time: 3 seconds Station dump on dev[1]: Station 02:00:00:00:03:00 (on wlan0) inactive time: 24 ms rx bytes: 150708 rx packets: 171 tx bytes: 64842 tx packets: 55 tx retries: 0 tx failed: 0 beacon loss: 0 beacon rx: 26 rx drop misc: 31 signal: -20 dBm signal avg: -20 dBm beacon signal avg: -20 dBm tx bitrate: 6.5 MBit/s VHT-MCS 0 VHT-NSS 1 rx bitrate: 6.0 MBit/s rx duration: 0 us expected throughput: 4.394Mbps authorized: yes authenticated: yes associated: yes preamble: long WMM/WME: yes MFP: no TDLS peer: no DTIM period: 2 beacon interval:100 short slot time:yes connected time: 3 seconds Station 02:00:00:00:01:00 (on wlan0) inactive time: 93 ms rx bytes: 18306 rx packets: 16 tx bytes: 18306 tx packets: 14 tx retries: 0 tx failed: 0 beacon loss: 0 beacon rx: 26 rx drop misc: 0 signal: -20 dBm signal avg: -20 dBm beacon signal avg: -20 dBm tx bitrate: 6.5 MBit/s VHT-MCS 0 VHT-NSS 1 rx duration: 0 us expected throughput: 4.394Mbps authorized: yes authenticated: yes associated: yes preamble: long WMM/WME: yes MFP: no TDLS peer: yes DTIM period: 2 beacon interval:100 short slot time:yes connected time: 3 seconds PASS ap_open_tdls_vht160 3.288951 2020-10-06 00:23:11.682069 passed all 1 test case(s) 2020-10-06 00:23:11 ./run-tests.py ap_open_tdls_vht80 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_tdls_vht80 1/1 Test: Open AP and two stations using TDLS with VHT 80 Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP Setup TDLS Station dump on dev[0]: Station 02:00:00:00:03:00 (on wlan0) inactive time: 21 ms rx bytes: 150942 rx packets: 174 tx bytes: 64624 tx packets: 53 tx retries: 0 tx failed: 0 beacon loss: 0 beacon rx: 28 rx drop misc: 29 signal: -27 dBm signal avg: -27 dBm beacon signal avg: -27 dBm tx bitrate: 6.5 MBit/s VHT-MCS 0 VHT-NSS 1 rx bitrate: 6.0 MBit/s rx duration: 0 us expected throughput: 4.394Mbps authorized: yes authenticated: yes associated: yes preamble: long WMM/WME: yes MFP: no TDLS peer: no DTIM period: 2 beacon interval:100 short slot time:yes connected time: 3 seconds Station 02:00:00:00:01:00 (on wlan0) inactive time: 122 ms rx bytes: 18306 rx packets: 16 tx bytes: 18306 tx packets: 14 tx retries: 0 tx failed: 0 beacon loss: 0 beacon rx: 28 rx drop misc: 0 signal: -27 dBm signal avg: -27 dBm beacon signal avg: -27 dBm tx bitrate: 6.5 MBit/s VHT-MCS 0 VHT-NSS 1 rx duration: 0 us expected throughput: 4.394Mbps authorized: yes authenticated: yes associated: yes preamble: long WMM/WME: yes MFP: no TDLS peer: yes DTIM period: 2 beacon interval:100 short slot time:yes connected time: 2 seconds Station dump on dev[1]: Station 02:00:00:00:03:00 (on wlan0) inactive time: 23 ms rx bytes: 150942 rx packets: 174 tx bytes: 64624 tx packets: 53 tx retries: 0 tx failed: 0 beacon loss: 0 beacon rx: 28 rx drop misc: 29 signal: -27 dBm signal avg: -27 dBm beacon signal avg: -27 dBm tx bitrate: 6.5 MBit/s VHT-MCS 0 VHT-NSS 1 rx bitrate: 6.0 MBit/s rx duration: 0 us expected throughput: 4.394Mbps authorized: yes authenticated: yes associated: yes preamble: long WMM/WME: yes MFP: no TDLS peer: no DTIM period: 2 beacon interval:100 short slot time:yes connected time: 3 seconds Station 02:00:00:00:01:00 (on wlan0) inactive time: 124 ms rx bytes: 18306 rx packets: 16 tx bytes: 18306 tx packets: 14 tx retries: 0 tx failed: 0 beacon loss: 0 beacon rx: 28 rx drop misc: 0 signal: -27 dBm signal avg: -27 dBm beacon signal avg: -27 dBm tx bitrate: 6.5 MBit/s VHT-MCS 0 VHT-NSS 1 rx duration: 0 us expected throughput: 4.394Mbps authorized: yes authenticated: yes associated: yes preamble: long WMM/WME: yes MFP: no TDLS peer: yes DTIM period: 2 beacon interval:100 short slot time:yes connected time: 2 seconds PASS ap_open_tdls_vht80 3.520356 2020-10-06 00:23:15.329631 passed all 1 test case(s) 2020-10-06 00:23:15 ./run-tests.py ap_open_tdls_vht80plus80 DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_tdls_vht80plus80 1/1 Test: Open AP and two stations using TDLS with VHT 80+80 Starting AP wlan3 Connect STA wlan0 to AP Connect STA wlan1 to AP Setup TDLS Station dump on dev[0]: Station 02:00:00:00:03:00 (on wlan0) inactive time: 22 ms rx bytes: 150494 rx packets: 169 tx bytes: 64624 tx packets: 53 tx retries: 0 tx failed: 0 beacon loss: 0 beacon rx: 26 rx drop misc: 29 signal: -27 dBm signal avg: -27 dBm beacon signal avg: -27 dBm tx bitrate: 6.5 MBit/s VHT-MCS 0 VHT-NSS 1 rx bitrate: 6.0 MBit/s rx duration: 0 us expected throughput: 4.394Mbps authorized: yes authenticated: yes associated: yes preamble: long WMM/WME: yes MFP: no TDLS peer: no DTIM period: 2 beacon interval:100 short slot time:yes connected time: 3 seconds Station 02:00:00:00:01:00 (on wlan0) inactive time: 114 ms rx bytes: 18306 rx packets: 16 tx bytes: 18306 tx packets: 14 tx retries: 0 tx failed: 0 beacon loss: 0 beacon rx: 26 rx drop misc: 0 signal: -27 dBm signal avg: -27 dBm beacon signal avg: -27 dBm tx bitrate: 6.5 MBit/s VHT-MCS 0 VHT-NSS 1 rx duration: 0 us expected throughput: 4.394Mbps authorized: yes authenticated: yes associated: yes preamble: long WMM/WME: yes MFP: no TDLS peer: yes DTIM period: 2 beacon interval:100 short slot time:yes connected time: 3 seconds Station dump on dev[1]: Station 02:00:00:00:03:00 (on wlan0) inactive time: 24 ms rx bytes: 150494 rx packets: 169 tx bytes: 64624 tx packets: 53 tx retries: 0 tx failed: 0 beacon loss: 0 beacon rx: 26 rx drop misc: 29 signal: -27 dBm signal avg: -27 dBm beacon signal avg: -27 dBm tx bitrate: 6.5 MBit/s VHT-MCS 0 VHT-NSS 1 rx bitrate: 6.0 MBit/s rx duration: 0 us expected throughput: 4.394Mbps authorized: yes authenticated: yes associated: yes preamble: long WMM/WME: yes MFP: no TDLS peer: no DTIM period: 2 beacon interval:100 short slot time:yes connected time: 3 seconds Station 02:00:00:00:01:00 (on wlan0) inactive time: 116 ms rx bytes: 18306 rx packets: 16 tx bytes: 18306 tx packets: 14 tx retries: 0 tx failed: 0 beacon loss: 0 beacon rx: 26 rx drop misc: 0 signal: -27 dBm signal avg: -27 dBm beacon signal avg: -27 dBm tx bitrate: 6.5 MBit/s VHT-MCS 0 VHT-NSS 1 rx duration: 0 us expected throughput: 4.394Mbps authorized: yes authenticated: yes associated: yes preamble: long WMM/WME: yes MFP: no TDLS peer: yes DTIM period: 2 beacon interval:100 short slot time:yes connected time: 3 seconds PASS ap_open_tdls_vht80plus80 3.22585 2020-10-06 00:23:18.683076 passed all 1 test case(s) 2020-10-06 00:23:18 ./run-tests.py ap_open_unexpected_assoc_event DEV: wlan0: 02:00:00:00:00:00 DEV: wlan1: 02:00:00:00:01:00 DEV: wlan2: 02:00:00:00:02:00 APDEV: wlan3 APDEV: wlan4 START ap_open_unexpected_assoc_event 1/1 Test: AP with open mode and unexpected association event Starting AP wlan3 Connect STA wlan0 to AP PASS ap_open_unexpected_assoc_event 0.284455 2020-10-06 00:23:19.098637 passed all 1 test case(s) 2020-10-06 00:23:19 ./stop.sh 2020-10-06 00:23:20 ./start.sh channels=4 2020-10-06 00:23:20 ./stop.sh