| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 3 Oct 2020 22:09:47 +0900
From: Alexandre Courbot <acourbot@...omium.org>
To: Tiffany Lin <tiffany.lin@...iatek.com>,
Andrew-CT Chen <andrew-ct.chen@...iatek.com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Tomasz Figa <tfiga@...omium.org>
Cc: Hans Verkuil <hverkuil-cisco@...all.nl>,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-mediatek@...ts.infradead.org,
Alexandre Courbot <acourbot@...omium.org>
Subject: [PATCH] media: mtk-vcodec: fix builds when remoteproc is disabled
The addition of MT8183 support added a dependency on the SCP remoteproc
module. However the initial patch used the "select" Kconfig directive,
which may result in the SCP module to not be compiled if remoteproc was
disabled. In such a case, mtk-vcodec would try to link against
non-existent SCP symbols. "select" was clearly misused here as explained
in kconfig-language.txt.
Replace this by a "depends" directive on at least one of the VPU and
SCP modules, to allow the driver to be compiled as long as one of these
is enabled, and adapt the code to support this new scenario.
Also adapt the Kconfig text to explain the extra requirements for MT8173
and MT8183.
Reported-by: Sakari Ailus <sakari.ailus@...ux.intel.com>
Signed-off-by: Alexandre Courbot <acourbot@...omium.org>
---
drivers/media/platform/Kconfig | 11 +--
.../media/platform/mtk-vcodec/mtk_vcodec_fw.c | 72 ++++++++++++-------
2 files changed, 55 insertions(+), 28 deletions(-)
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index a3cb104956d5..e559d9c529b6 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -253,14 +253,17 @@ config VIDEO_MEDIATEK_VCODEC
depends on MTK_IOMMU || COMPILE_TEST
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on VIDEO_MEDIATEK_VPU || MTK_SCP
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
- select VIDEO_MEDIATEK_VPU
- select MTK_SCP
help
Mediatek video codec driver provides HW capability to
- encode and decode in a range of video formats
- This driver rely on VPU driver to communicate with VPU.
+ encode and decode in a range of video formats on MT8173
+ and MT8183.
+
+ Note that support for support for MT8173 requires
+ VIDEO_MEDIATEK_VPU to also be selected. Support for
+ MT8183 depends on MTK_SCP.
To compile this driver as modules, choose M here: the
modules will be called mtk-vcodec-dec and mtk-vcodec-enc.
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw.c
index 6c2a2568d844..23a80027a8fb 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw.c
@@ -13,6 +13,7 @@ struct mtk_vcodec_fw_ops {
mtk_vcodec_ipi_handler handler, const char *name, void *priv);
int (*ipi_send)(struct mtk_vcodec_fw *fw, int id, void *buf,
unsigned int len, unsigned int wait);
+ void (*release)(struct mtk_vcodec_fw *fw);
};
struct mtk_vcodec_fw {
@@ -22,6 +23,8 @@ struct mtk_vcodec_fw {
struct mtk_scp *scp;
};
+#if IS_ENABLED(CONFIG_VIDEO_MEDIATEK_VPU)
+
static int mtk_vcodec_vpu_load_firmware(struct mtk_vcodec_fw *fw)
{
return vpu_load_firmware(fw->pdev);
@@ -64,6 +67,27 @@ static int mtk_vcodec_vpu_ipi_send(struct mtk_vcodec_fw *fw, int id, void *buf,
return vpu_ipi_send(fw->pdev, id, buf, len);
}
+static void mtk_vcodec_vpu_release(struct mtk_vcodec_fw *fw)
+{
+ put_device(&fw->pdev->dev);
+}
+
+static void mtk_vcodec_vpu_reset_handler(void *priv)
+{
+ struct mtk_vcodec_dev *dev = priv;
+ struct mtk_vcodec_ctx *ctx;
+
+ mtk_v4l2_err("Watchdog timeout!!");
+
+ mutex_lock(&dev->dev_mutex);
+ list_for_each_entry(ctx, &dev->ctx_list, list) {
+ ctx->state = MTK_STATE_ABORT;
+ mtk_v4l2_debug(0, "[%d] Change to state MTK_STATE_ABORT",
+ ctx->id);
+ }
+ mutex_unlock(&dev->dev_mutex);
+}
+
static const struct mtk_vcodec_fw_ops mtk_vcodec_vpu_msg = {
.load_firmware = mtk_vcodec_vpu_load_firmware,
.get_vdec_capa = mtk_vcodec_vpu_get_vdec_capa,
@@ -71,8 +95,13 @@ static const struct mtk_vcodec_fw_ops mtk_vcodec_vpu_msg = {
.map_dm_addr = mtk_vcodec_vpu_map_dm_addr,
.ipi_register = mtk_vcodec_vpu_set_ipi_register,
.ipi_send = mtk_vcodec_vpu_ipi_send,
+ .release = mtk_vcodec_vpu_release,
};
+#endif /* IS_ENABLED(CONFIG_VIDEO_MEDIATEK_VPU) */
+
+#if IS_ENABLED(CONFIG_MTK_SCP)
+
static int mtk_vcodec_scp_load_firmware(struct mtk_vcodec_fw *fw)
{
return rproc_boot(scp_get_rproc(fw->scp));
@@ -107,6 +136,11 @@ static int mtk_vcodec_scp_ipi_send(struct mtk_vcodec_fw *fw, int id, void *buf,
return scp_ipi_send(fw->scp, id, buf, len, wait);
}
+static void mtk_vcodec_scp_release(struct mtk_vcodec_fw *fw)
+{
+ scp_put(fw->scp);
+}
+
static const struct mtk_vcodec_fw_ops mtk_vcodec_rproc_msg = {
.load_firmware = mtk_vcodec_scp_load_firmware,
.get_vdec_capa = mtk_vcodec_scp_get_vdec_capa,
@@ -114,23 +148,10 @@ static const struct mtk_vcodec_fw_ops mtk_vcodec_rproc_msg = {
.map_dm_addr = mtk_vcodec_vpu_scp_dm_addr,
.ipi_register = mtk_vcodec_scp_set_ipi_register,
.ipi_send = mtk_vcodec_scp_ipi_send,
+ .release = mtk_vcodec_scp_release,
};
-static void mtk_vcodec_reset_handler(void *priv)
-{
- struct mtk_vcodec_dev *dev = priv;
- struct mtk_vcodec_ctx *ctx;
-
- mtk_v4l2_err("Watchdog timeout!!");
-
- mutex_lock(&dev->dev_mutex);
- list_for_each_entry(ctx, &dev->ctx_list, list) {
- ctx->state = MTK_STATE_ABORT;
- mtk_v4l2_debug(0, "[%d] Change to state MTK_STATE_ABORT",
- ctx->id);
- }
- mutex_unlock(&dev->dev_mutex);
-}
+#endif /* IS_ENABLED(CONFIG_MTK_SCP) */
struct mtk_vcodec_fw *mtk_vcodec_fw_select(struct mtk_vcodec_dev *dev,
enum mtk_vcodec_fw_type type,
@@ -143,16 +164,22 @@ struct mtk_vcodec_fw *mtk_vcodec_fw_select(struct mtk_vcodec_dev *dev,
switch (type) {
case VPU:
+#if IS_ENABLED(CONFIG_VIDEO_MEDIATEK_VPU)
ops = &mtk_vcodec_vpu_msg;
fw_pdev = vpu_get_plat_device(dev->plat_dev);
if (!fw_pdev) {
mtk_v4l2_err("firmware device is not ready");
return ERR_PTR(-EINVAL);
}
- vpu_wdt_reg_handler(fw_pdev, mtk_vcodec_reset_handler,
+ vpu_wdt_reg_handler(fw_pdev, mtk_vcodec_vpu_reset_handler,
dev, rst_id);
break;
+#else
+ mtk_v4l2_err("no VPU support in this kernel");
+ return ERR_PTR(-ENODEV);
+#endif
case SCP:
+#if IS_ENABLED(CONFIG_MTK_SCP)
ops = &mtk_vcodec_rproc_msg;
scp = scp_get(dev->plat_dev);
if (!scp) {
@@ -160,6 +187,10 @@ struct mtk_vcodec_fw *mtk_vcodec_fw_select(struct mtk_vcodec_dev *dev,
return ERR_PTR(-EPROBE_DEFER);
}
break;
+#else
+ mtk_v4l2_err("no SCP support in this kernel");
+ return ERR_PTR(-ENODEV);
+#endif
default:
mtk_v4l2_err("invalid vcodec fw type");
return ERR_PTR(-EINVAL);
@@ -180,14 +211,7 @@ EXPORT_SYMBOL_GPL(mtk_vcodec_fw_select);
void mtk_vcodec_fw_release(struct mtk_vcodec_fw *fw)
{
- switch (fw->type) {
- case VPU:
- put_device(&fw->pdev->dev);
- break;
- case SCP:
- scp_put(fw->scp);
- break;
- }
+ fw->ops->release(fw);
}
EXPORT_SYMBOL_GPL(mtk_vcodec_fw_release);
--
2.28.0.806.g8561365e88-goog
Powered by blists - more mailing lists