| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <d372da06-301b-c51f-d164-444cb6e341a5@phytec.de>
Date: Mon, 5 Oct 2020 11:31:59 +0200
From: Stefan Riedmüller <s.riedmueller@...tec.de>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@...nel.org>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
Christian Hemp <c.hemp@...tec.de>,
Jan Luebbe <jlu@...gutronix.de>
Subject: Re: [PATCH v2 1/5] media: mt9p031: Add support for 8 bit and 10 bit
formats
Hi Laurent,
On 02.10.20 01:53, Laurent Pinchart wrote:
> Hi Stefan,
>
> On Thu, Oct 01, 2020 at 11:07:00AM +0200, Stefan Riedmüller wrote:
>> On 30.09.20 13:42, Laurent Pinchart wrote:
>>> On Wed, Sep 30, 2020 at 12:51:29PM +0200, Stefan Riedmueller wrote:
>>>> From: Christian Hemp <c.hemp@...tec.de>
>>>>
>>>> Aside from 12 bit monochrome or color format the sensor implicitly
>>>> supports 10 and 8 bit formats as well by simply dropping the
>>>> corresponding LSBs.
>>>
>>> That's not how it should work though. If you set the format on
>>> MEDIA_BUS_FMT_SGRBG8_1X8 through the pipeline for instance, you will end
>>> up capturing the 8 LSB, not the 8 MSB.
>>>
>>> What's your use case for this ?
>>
>> I use this sensor in combination with an i.MX 6 and i.MX 6UL. When the
>> sensor is connected with 12 bit (or 10 bit on the i.MX 6UL) and I set
>> MEDIA_BUS_FMT_SGRBG8_1X8 through the pipeline the CSI interface drops the
>> unused 4 LSB (or 2 LSB on the i.MX 6UL) so I get the 8 MSB from my 12 bit
>> sensor.
>
> Is that the PIXEL_BIT bit in CSI_CSICR1 for the i.MX6UL ? If so I think
> this should be handled in the imx7-media-csi driver. You could set the
> format to MEDIA_BUS_FMT_SGRBG10_1X10 on the sink pad of the CSI and to
> MEDIA_BUS_FMT_SGRBG8_1X8 on the source pad to configure this. I don't
> think the sensor driver should be involved, otherwise we'd have to patch
> all sensor drivers. From a sensor point of view, it outputs 12-bit
> Bayer, not 8-bit.
Ah, I had it wrong. What you say makes total sense. I will take another look
at it and also try to work your suggestion from below in.
Thanks,
Stefan
>
> Now there's a caveat. When used with the i.MX6UL, I assume you connected
> D[11:2] of the sensor to D[9:0] of the i.MX6UL, right ? The i.MX6UL
> doesn't support 12-bit inputs, so it should accept
> MEDIA_BUS_FMT_SGRBG12_1X12 on its sink pad. In this case, as D[1:0] of
> the sensor are left unconnected, I think you should set data-shift to 2
> and bus-width to 10 in DT on the sensor side. The MT9P031 driver should
> parse that, and output MEDIA_BUS_FMT_SGRBG10_1X10 instead of
> MEDIA_BUS_FMT_SGRBG12_1X12 in that case.
>
>> Does this clarify things? Maybe the description in the commit message is not
>> accurate enough or did I get something wrong?
>>
>>>> Signed-off-by: Christian Hemp <c.hemp@...tec.de>
>>>> [jlu@...gutronix.de: simplified by dropping v4l2_colorspace handling]
>>>> Signed-off-by: Jan Luebbe <jlu@...gutronix.de>
>>>> Signed-off-by: Stefan Riedmueller <s.riedmueller@...tec.de>
>>>> ---
>>>> Changes in v2:
>>>> - Use unsigned int for num_fmts and loop variable in find_datafmt
>>>> - Remove superfluous const qualifier from find_datafmt
>>>> ---
>>>> drivers/media/i2c/mt9p031.c | 50 +++++++++++++++++++++++++++++--------
>>>> 1 file changed, 40 insertions(+), 10 deletions(-)
>>>>
>>>> diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c
>>>> index dc23b9ed510a..2e6671ef877c 100644
>>>> --- a/drivers/media/i2c/mt9p031.c
>>>> +++ b/drivers/media/i2c/mt9p031.c
>>>> @@ -116,6 +116,18 @@ enum mt9p031_model {
>>>> MT9P031_MODEL_MONOCHROME,
>>>> };
>>>>
>>>> +static const u32 mt9p031_color_fmts[] = {
>>>> + MEDIA_BUS_FMT_SGRBG8_1X8,
>>>> + MEDIA_BUS_FMT_SGRBG10_1X10,
>>>> + MEDIA_BUS_FMT_SGRBG12_1X12,
>>>> +};
>>>> +
>>>> +static const u32 mt9p031_monochrome_fmts[] = {
>>>> + MEDIA_BUS_FMT_Y8_1X8,
>>>> + MEDIA_BUS_FMT_Y10_1X10,
>>>> + MEDIA_BUS_FMT_Y12_1X12,
>>>> +};
>>>> +
>>>> struct mt9p031 {
>>>> struct v4l2_subdev subdev;
>>>> struct media_pad pad;
>>>> @@ -138,6 +150,9 @@ struct mt9p031 {
>>>> struct v4l2_ctrl *blc_auto;
>>>> struct v4l2_ctrl *blc_offset;
>>>>
>>>> + const u32 *fmts;
>>>> + unsigned int num_fmts;
>>>> +
>>>> /* Registers cache */
>>>> u16 output_control;
>>>> u16 mode2;
>>>> @@ -148,6 +163,17 @@ static struct mt9p031 *to_mt9p031(struct v4l2_subdev *sd)
>>>> return container_of(sd, struct mt9p031, subdev);
>>>> }
>>>>
>>>> +static u32 mt9p031_find_datafmt(struct mt9p031 *mt9p031, u32 code)
>>>> +{
>>>> + unsigned int i;
>>>> +
>>>> + for (i = 0; i < mt9p031->num_fmts; i++)
>>>> + if (mt9p031->fmts[i] == code)
>>>> + return mt9p031->fmts[i];
>>>> +
>>>> + return mt9p031->fmts[mt9p031->num_fmts-1];
>>>> +}
>>>> +
>>>> static int mt9p031_read(struct i2c_client *client, u8 reg)
>>>> {
>>>> return i2c_smbus_read_word_swapped(client, reg);
>>>> @@ -476,10 +502,11 @@ static int mt9p031_enum_mbus_code(struct v4l2_subdev *subdev,
>>>> {
>>>> struct mt9p031 *mt9p031 = to_mt9p031(subdev);
>>>>
>>>> - if (code->pad || code->index)
>>>> + if (code->pad || code->index >= mt9p031->num_fmts)
>>>> return -EINVAL;
>>>>
>>>> - code->code = mt9p031->format.code;
>>>> + code->code = mt9p031->fmts[code->index];
>>>> +
>>>> return 0;
>>>> }
>>>>
>>>> @@ -573,6 +600,8 @@ static int mt9p031_set_format(struct v4l2_subdev *subdev,
>>>> __format->width = __crop->width / hratio;
>>>> __format->height = __crop->height / vratio;
>>>>
>>>> + __format->code = mt9p031_find_datafmt(mt9p031, format->format.code);
>>>> +
>>>> format->format = *__format;
>>>>
>>>> return 0;
>>>> @@ -951,10 +980,7 @@ static int mt9p031_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
>>>>
>>>> format = v4l2_subdev_get_try_format(subdev, fh->pad, 0);
>>>>
>>>> - if (mt9p031->model == MT9P031_MODEL_MONOCHROME)
>>>> - format->code = MEDIA_BUS_FMT_Y12_1X12;
>>>> - else
>>>> - format->code = MEDIA_BUS_FMT_SGRBG12_1X12;
>>>> + format->code = mt9p031_find_datafmt(mt9p031, 0);
>>>>
>>>> format->width = MT9P031_WINDOW_WIDTH_DEF;
>>>> format->height = MT9P031_WINDOW_HEIGHT_DEF;
>>>> @@ -1121,10 +1147,14 @@ static int mt9p031_probe(struct i2c_client *client,
>>>> mt9p031->crop.left = MT9P031_COLUMN_START_DEF;
>>>> mt9p031->crop.top = MT9P031_ROW_START_DEF;
>>>>
>>>> - if (mt9p031->model == MT9P031_MODEL_MONOCHROME)
>>>> - mt9p031->format.code = MEDIA_BUS_FMT_Y12_1X12;
>>>> - else
>>>> - mt9p031->format.code = MEDIA_BUS_FMT_SGRBG12_1X12;
>>>> + if (mt9p031->model == MT9P031_MODEL_MONOCHROME) {
>>>> + mt9p031->fmts = mt9p031_monochrome_fmts;
>>>> + mt9p031->num_fmts = ARRAY_SIZE(mt9p031_monochrome_fmts);
>>>> + } else {
>>>> + mt9p031->fmts = mt9p031_color_fmts;
>>>> + mt9p031->num_fmts = ARRAY_SIZE(mt9p031_color_fmts);
>>>> + }
>>>> + mt9p031->format.code = mt9p031_find_datafmt(mt9p031, 0);
>>>>
>>>> mt9p031->format.width = MT9P031_WINDOW_WIDTH_DEF;
>>>> mt9p031->format.height = MT9P031_WINDOW_HEIGHT_DEF;
>
Powered by blists - more mailing lists