Message-ID: <65ba8a8b86201d8906313fbacc4fb711b9b423af.camel@infradead.org>
Date:   Tue, 06 Oct 2020 09:37:37 +0100
From:   David Woodhouse <dwmw2@...radead.org>
To:     Dexuan Cui <decui@...rosoft.com>,
        Thomas Gleixner <tglx@...utronix.de>,
        Ming Lei <ming.lei@...hat.com>, Christoph Hellwig <hch@....de>,
        Christian Borntraeger <borntraeger@...ibm.com>,
        Stefan Haberland <sth@...ux.vnet.ibm.com>,
        Jens Axboe <axboe@...nel.dk>,
        Marc Zyngier <marc.zyngier@....com>,
        "linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Cc:     Long Li <longli@...rosoft.com>,
        Haiyang Zhang <haiyangz@...rosoft.com>,
        Michael Kelley <mikelley@...rosoft.com>
Subject: Re: irq_build_affinity_masks() allocates improper affinity if
 num_possible_cpus() > num_present_cpus()?

On Tue, 2020-10-06 at 06:47 +0000, Dexuan Cui wrote:
> Hi all,
> I'm running a single-CPU Linux VM on Hyper-V. The Linux kernel is v5.9-rc7
> and I have CONFIG_NR_CPUS=256.
> 
> The Hyper-V Host (Version 17763-10.0-1-0.1457) provides a guest firmware,
> which always reports 128 Local APIC entries in the ACPI MADT table. Here
> only the first Local APIC entry's "Processor Enabled" is 1 since this
> Linux VM is configured to have only 1 CPU. This means: in the Linux kernel,
> the "cpu_present_mask" and " cpu_online_mask " have only 1 CPU (i.e. CPU0),
> while the "cpu_possible_mask" has 128 CPUs, and the "nr_cpu_ids" is 128.
> 
> I pass through an MSI-X-capable PCI device to the Linux VM (which has
> only 1 virtual CPU), and the below code does *not* report any error
> (i.e. pci_alloc_irq_vectors_affinity() returns 2, and request_irq()
> returns 0), but the code does not work: the second MSI-X interrupt is not
> happening while the first interrupt does work fine.
> 
> int nr_irqs = 2;
> int i, nvec, irq;
> 
> nvec = pci_alloc_irq_vectors_affinity(pdev, nr_irqs, nr_irqs,
>                 PCI_IRQ_MSIX | PCI_IRQ_AFFINITY, NULL);
> 
> for (i = 0; i < nvec; i++) {
>         irq = pci_irq_vector(pdev, i);
>         err = request_irq(irq, test_intr, 0, "test_intr", &intr_cxt[i]);
> }
> 
> It turns out that pci_alloc_irq_vectors_affinity() -> ... ->
> irq_create_affinity_masks() allocates an improper affinity for the second
> interrupt. The below printk() shows that the second interrupt's affinity is
> 1-64, but only CPU0 is present in the system! As a result, later,
> request_irq() -> ... -> irq_startup() -> __irq_startup_managed() returns
> IRQ_STARTUP_ABORT because cpumask_any_and(aff, cpu_online_mask) is 
> empty (i.e. >= nr_cpu_ids), and irq_startup() *silently* fails (i.e. "return 0;"),
> since __irq_startup() is only called for IRQ_STARTUP_MANAGED and
> IRQ_STARTUP_NORMAL.
> 
> --- a/kernel/irq/affinity.c
> +++ b/kernel/irq/affinity.c
> @@ -484,6 +484,9 @@ struct irq_affinity_desc *
>         for (i = affd->pre_vectors; i < nvecs - affd->post_vectors; i++)
>                 masks[i].is_managed = 1;
> 
> +       for (i = 0; i < nvecs; i++)
> +               printk("i=%d, affi = %*pbl\n", i,
> +                      cpumask_pr_args(&masks[i].mask));
>         return masks;
>  }
> 
> [   43.770477] i=0, affi = 0,65-127
> [   43.770484] i=1, affi = 1-64
> 
> Though here the issue happens to a Linux VM on Hyper-V, I think the same
> issue can also happen to a physical machine, if the physical machine also
> uses a lot of static MADT entries, of which only the entries of the present
> CPUs are marked to be "Processor Enabled == 1".
> 
> I think pci_alloc_irq_vectors_affinity() -> __pci_enable_msix_range() ->
> irq_calc_affinity_vectors() -> cpumask_weight(cpu_possible_mask) should
> use cpu_present_mask rather than cpu_possible_mask (), so here
> irq_calc_affinity_vectors() would return 1, and
> __pci_enable_msix_range() would immediately return -ENOSPC to avoid a
> *silent* failure.
> 
> However, git-log shows that this 2018 commit intentionally changed the
> cpu_present_mask to cpu_possible_mask:
> 84676c1f21e8 ("genirq/affinity: assign vectors to all possible CPUs")
> 
> so I'm not sure whether (and how?) we should address the *silent* failure.
> 
> BTW, here I use a single-CPU VM to simplify the discussion. Actually,
> if the VM has n CPUs, with the above usage of
> pci_alloc_irq_vectors_affinity() (which might seem incorrect, but my point is
> that it's really not good to have a silent failure, which makes it a lot more 
> difficult to figure out what goes wrong), it looks only the first n MSI-X interrupts
> can work, and the (n+1)'th MSI-X interrupt can not work due to the allocated
> improper affinity.
> 
> According to my tests, if we need n+1 MSI-X interrupts in such a VM that
> has n CPUs, it looks we have 2 options (the second should be better):
> 
> 1. Do not use the PCI_IRQ_AFFINITY flag, i.e.
>         pci_alloc_irq_vectors_affinity(pdev, n+1, n+1, PCI_IRQ_MSIX, NULL);
> 
> 2. Use the PCI_IRQ_AFFINITY flag, and pass a struct irq_affinity affd,
> which tells the API that we don't care about the first interrupt's affinity:
> 
>         struct irq_affinity affd = {
>                 .pre_vectors = 1,
> 				...
>         };
> 
>         pci_alloc_irq_vectors_affinity(pdev, n+1, n+1,
>                 PCI_IRQ_MSIX | PCI_IRQ_AFFINITY, &affd);
> 
> PS, irq_create_affinity_masks() is complicated. Let me know if you're
> interested to know how it allocates the invalid affinity "1-64" for the
> second MSI-X interrupt.

Go on. It'll save me a cup of coffee or two...

> PS2, the latest Hyper-V provides only one ACPI MADT entry to a 1-CPU VM,
> so the issue described above can not reproduce there.

It seems fairly easy to reproduce in qemu with -smp 1,maxcpus=128 and a
virtio-blk drive, having commented out the 'desc->pre_vectors++' around
line 130 of virtio_pci_common.c so that it does actually spread them.

[    0.836252] i=0, affi = 0,65-127
[    0.836672] i=1, affi = 1-64
[    0.837905] virtio_blk virtio1: [vda] 41943040 512-byte logical blocks (21.5 GB/20.0 GiB)
[    0.839080] vda: detected capacity change from 0 to 21474836480

In my build I had to add 'nox2apic' because I think I actually already
fixed this for the x2apic + no-irq-remapping case with the max_affinity
patch series¹. But mostly by accident.


¹ https://git.infradead.org/users/dwmw2/linux.git/shortlog/refs/heads/irqaffinity

Download attachment "smime.p7s" of type "application/x-pkcs7-signature" (5174 bytes)

Powered by blists - more mailing lists