| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1601997621-12056-1-git-send-email-bgodavar@codeaurora.org>
Date: Tue, 6 Oct 2020 20:50:21 +0530
From: Balakrishna Godavarthi <bgodavar@...eaurora.org>
To: marcel@...tmann.org, johan.hedberg@...il.com
Cc: mka@...omium.org, linux-kernel@...r.kernel.org,
linux-bluetooth@...r.kernel.org, hemantg@...eaurora.org,
linux-arm-msm@...r.kernel.org, gubbaven@...eaurora.org,
abhishekpandit@...omium.org, rjliao@...eaurora.org,
Balakrishna Godavarthi <bgodavar@...eaurora.org>
Subject: [PATCH v1] Bluetooth: hci_qca: Wait for timeout during suspend
From: Venkata Lakshmi Narayana Gubba <gubbaven@...eaurora.org>
Currently qca_suspend() is relied on IBS mechanism. During
FW download and memory dump collections, IBS will be disabled.
In those cases, driver will allow suspend and still uses the
serdev port, which results to errors. Now added a wait timeout
if suspend is triggered during FW download and memory collections.
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@...eaurora.org>
Signed-off-by: Balakrishna Godavarthi <bgodavar@...eaurora.org>
---
drivers/bluetooth/hci_qca.c | 48 ++++++++++++++++++++++++++++++++++++---------
1 file changed, 39 insertions(+), 9 deletions(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 3d13002..652a84c 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -50,6 +50,8 @@
#define IBS_HOST_TX_IDLE_TIMEOUT_MS 2000
#define CMD_TRANS_TIMEOUT_MS 100
#define MEMDUMP_TIMEOUT_MS 8000
+#define IBS_DISABLE_SSR_TIMEOUT_MS (MEMDUMP_TIMEOUT_MS + 1000)
+#define FW_DOWNLOAD_TIMEOUT_MS 3000
/* susclk rate */
#define SUSCLK_RATE_32KHZ 32768
@@ -68,12 +70,13 @@
#define QCA_MEMDUMP_BYTE 0xFB
enum qca_flags {
- QCA_IBS_ENABLED,
+ QCA_IBS_DISABLED,
QCA_DROP_VENDOR_EVENT,
QCA_SUSPENDING,
QCA_MEMDUMP_COLLECTION,
QCA_HW_ERROR_EVENT,
- QCA_SSR_TRIGGERED
+ QCA_SSR_TRIGGERED,
+ QCA_BT_OFF
};
enum qca_capabilities {
@@ -871,7 +874,7 @@ static int qca_enqueue(struct hci_uart *hu, struct sk_buff *skb)
* Out-Of-Band(GPIOs control) sleep is selected.
* Don't wake the device up when suspending.
*/
- if (!test_bit(QCA_IBS_ENABLED, &qca->flags) ||
+ if (test_bit(QCA_IBS_DISABLED, &qca->flags) ||
test_bit(QCA_SUSPENDING, &qca->flags)) {
skb_queue_tail(&qca->txq, skb);
spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
@@ -1016,7 +1019,7 @@ static void qca_controller_memdump(struct work_struct *work)
* the controller to send the dump is 8 seconds. let us
* start timer to handle this asynchronous activity.
*/
- clear_bit(QCA_IBS_ENABLED, &qca->flags);
+ set_bit(QCA_IBS_DISABLED, &qca->flags);
set_bit(QCA_MEMDUMP_COLLECTION, &qca->flags);
dump = (void *) skb->data;
dump_size = __le32_to_cpu(dump->dump_size);
@@ -1620,6 +1623,7 @@ static int qca_power_on(struct hci_dev *hdev)
struct hci_uart *hu = hci_get_drvdata(hdev);
enum qca_btsoc_type soc_type = qca_soc_type(hu);
struct qca_serdev *qcadev;
+ struct qca_data *qca = hu->priv;
int ret = 0;
/* Non-serdev device usually is powered by external power
@@ -1639,6 +1643,7 @@ static int qca_power_on(struct hci_dev *hdev)
}
}
+ clear_bit(QCA_BT_OFF, &qca->flags);
return ret;
}
@@ -1658,7 +1663,7 @@ static int qca_setup(struct hci_uart *hu)
return ret;
/* Patch downloading has to be done without IBS mode */
- clear_bit(QCA_IBS_ENABLED, &qca->flags);
+ set_bit(QCA_IBS_DISABLED, &qca->flags);
/* Enable controller to do both LE scan and BR/EDR inquiry
* simultaneously.
@@ -1707,7 +1712,7 @@ static int qca_setup(struct hci_uart *hu)
ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver,
firmware_name);
if (!ret) {
- set_bit(QCA_IBS_ENABLED, &qca->flags);
+ clear_bit(QCA_IBS_DISABLED, &qca->flags);
qca_debugfs_init(hdev);
hu->hdev->hw_error = qca_hw_error;
hu->hdev->cmd_timeout = qca_cmd_timeout;
@@ -1813,7 +1818,7 @@ static void qca_power_shutdown(struct hci_uart *hu)
* data in skb's.
*/
spin_lock_irqsave(&qca->hci_ibs_lock, flags);
- clear_bit(QCA_IBS_ENABLED, &qca->flags);
+ set_bit(QCA_IBS_DISABLED, &qca->flags);
qca_flush(hu);
spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
@@ -1833,6 +1838,8 @@ static void qca_power_shutdown(struct hci_uart *hu)
} else if (qcadev->bt_en) {
gpiod_set_value_cansleep(qcadev->bt_en, 0);
}
+
+ set_bit(QCA_BT_OFF, &qca->flags);
}
static int qca_power_off(struct hci_dev *hdev)
@@ -2082,11 +2089,34 @@ static int __maybe_unused qca_suspend(struct device *dev)
bool tx_pending = false;
int ret = 0;
u8 cmd;
+ u32 wait_timeout = 0;
set_bit(QCA_SUSPENDING, &qca->flags);
- /* Device is downloading patch or doesn't support in-band sleep. */
- if (!test_bit(QCA_IBS_ENABLED, &qca->flags))
+ if (test_bit(QCA_BT_OFF, &qca->flags))
+ return 0;
+
+ if (test_bit(QCA_IBS_DISABLED, &qca->flags)) {
+ wait_timeout = test_bit(QCA_SSR_TRIGGERED, &qca->flags) ?
+ IBS_DISABLE_SSR_TIMEOUT_MS :
+ FW_DOWNLOAD_TIMEOUT_MS;
+
+ /* QCA_IBS_DISABLED flag is set to true, During FW download
+ * and during memory dump collection. It is reset to false,
+ * After FW download complete and after memory dump collections.
+ */
+ wait_on_bit_timeout(&qca->flags, QCA_IBS_DISABLED,
+ TASK_UNINTERRUPTIBLE, msecs_to_jiffies(wait_timeout));
+
+ if (test_bit(QCA_IBS_DISABLED, &qca->flags)) {
+ bt_dev_err(hu->hdev, "SSR or FW download time out");
+ ret = -ETIMEDOUT;
+ goto error;
+ }
+ }
+
+ /* After memory dump collection, Controller is powered off.*/
+ if (test_bit(QCA_BT_OFF, &qca->flags))
return 0;
cancel_work_sync(&qca->ws_awake_device);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists