lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20201006191121.GA2653627@bogus>
Date:   Tue, 6 Oct 2020 14:11:21 -0500
From:   Rob Herring <robh@...nel.org>
To:     Stephen Boyd <swboyd@...omium.org>
Cc:     Jonathan Cameron <jic23@...nel.org>, linux-kernel@...r.kernel.org,
        linux-iio@...r.kernel.org, Daniel Campello <campello@...omium.org>,
        Lars-Peter Clausen <lars@...afoo.de>,
        Peter Meerwald-Stadler <pmeerw@...erw.net>,
        devicetree@...r.kernel.org,
        Douglas Anderson <dianders@...omium.org>,
        Gwendal Grignou <gwendal@...omium.org>,
        Evan Green <evgreen@...omium.org>
Subject: Re: [PATCH v2 5/6] dt-bindings: iio: sx9310: Add various settings as
 DT properties

On Wed, Sep 30, 2020 at 12:57:27AM -0700, Stephen Boyd wrote:
> We need to set various bits in the hardware registers for this device to
> operate properly depending on how it is installed. Add a handful of DT
> properties to configure these things.
> 
> Cc: Daniel Campello <campello@...omium.org>
> Cc: Lars-Peter Clausen <lars@...afoo.de>
> Cc: Peter Meerwald-Stadler <pmeerw@...erw.net>
> Cc: Rob Herring <robh+dt@...nel.org>
> Cc: <devicetree@...r.kernel.org>
> Cc: Douglas Anderson <dianders@...omium.org>
> Cc: Gwendal Grignou <gwendal@...omium.org>
> Cc: Evan Green <evgreen@...omium.org>
> Signed-off-by: Stephen Boyd <swboyd@...omium.org>
> ---
>  .../iio/proximity/semtech,sx9310.yaml         | 61 +++++++++++++++++++
>  1 file changed, 61 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
> index 5739074d3592..a85b8fa25861 100644
> --- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
> +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
> @@ -40,6 +40,61 @@ properties:
>    "#io-channel-cells":
>      const: 1
>  
> +  semtech,cs0-ground:
> +    description: Indicates the CS0 sensor is connected to ground.
> +    type: boolean
> +
> +  semtech,combined-sensors:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description: |
> +      List of which sensors are combined and represented by CS3.
> +      Possible values are -
> +      3        - CS3 (internal)
> +      0 1      - CS0 + CS1
> +      1 2      - CS1 + CS2 (default)
> +      0 1 2 3  - CS0 + CS1 + CS2 + CS3

       items:
         enum: [ 0, 1, 2, 3 ]

With that,

Reviewed-by: Rob Herring <robh@...nel.org>

> +    minItems: 1
> +    maxItems: 4
> +
> +  semtech,resolution:
> +    description:
> +      Capacitance measure resolution. Refer to datasheet for more details.
> +    enum:
> +      - coarsest
> +      - very-coarse
> +      - coarse
> +      - medium-coarse
> +      - medium
> +      - fine
> +      - very-fine
> +      - finest
> +
> +  semtech,startup-sensor:
> +    $ref: /schemas/types.yaml#definitions/uint32
> +    enum: [0, 1, 2, 3]
> +    default: 0
> +    description:
> +      Sensor used for start-up proximity detection. The combined
> +      sensor is represented by the value 3. This is used for initial
> +      compensation.
> +
> +  semtech,proxraw-strength:
> +    $ref: /schemas/types.yaml#definitions/uint32
> +    enum: [0, 2, 4, 8]
> +    default: 2
> +    description:
> +      PROXRAW filter strength. A value of 0 represents off, and other values
> +      represent 1-1/N.
> +
> +  semtech,avg-pos-strength:
> +    $ref: /schemas/types.yaml#definitions/uint32
> +    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
> +    default: 16
> +    description:
> +      Average positive filter strength. A value of 0 represents off and
> +      UINT_MAX (4294967295) represents infinite. Other values
> +      represent 1-1/N.
> +
>  required:
>    - compatible
>    - reg
> @@ -61,5 +116,11 @@ examples:
>          vdd-supply = <&pp3300_a>;
>          svdd-supply = <&pp1800_prox>;
>          #io-channel-cells = <1>;
> +        semtech,cs0-ground;
> +        semtech,combined-sensors = <1 2 3>;
> +        semtech,resolution = "fine";
> +        semtech,startup-sensor = <1>;
> +        semtech,proxraw-strength = <2>;
> +        semtech,avg-pos-strength = <64>;
>        };
>      };
> -- 
> Sent by a computer, using git, on the internet
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ