[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201007060525.ya6limypf6ggmtae@vireshk-i7>
Date: Wed, 7 Oct 2020 11:35:25 +0530
From: Viresh Kumar <viresh.kumar@...aro.org>
To: Sudeep Holla <sudeep.holla@....com>
Cc: Jassi Brar <jassisinghbrar@...il.com>,
Jassi Brar <jaswinder.singh@...aro.org>,
ALKML <linux-arm-kernel@...ts.infradead.org>,
DTML <devicetree@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
Vincent Guittot <vincent.guittot@...aro.org>,
Frank Rowand <frowand.list@...il.com>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh@...nel.org>, Rob Herring <robh+dt@...nel.org>
Subject: Re: [PATCH 4/4] mailbox: arm_mhu: Add ARM MHU doorbell driver
On 28-09-20, 12:44, Sudeep Holla wrote:
> The MHU drives the signal using a 32-bit register, with all 32 bits
> logically ORed together. The MHU provides a set of registers to enable
> software to set, clear, and check the status of each of the bits of this
> register independently. The use of 32 bits for each interrupt line
> enables software to provide more information about the source of the
> interrupt. For example, each bit of the register can be associated with
> a type of event that can contribute to raising the interrupt.
>
> This patch adds a separate the MHU controller driver for doorbel mode
> of operation using the extended DT binding to add support the same.
>
> Signed-off-by: Sudeep Holla <sudeep.holla@....com>
> ---
> drivers/mailbox/Makefile | 2 +-
> drivers/mailbox/arm_mhu_db.c | 359 +++++++++++++++++++++++++++++++++++
Please put an entry in MAINTAINERS as well for this.
--
viresh
Powered by blists - more mailing lists