| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <160205472599.7002.13464764353965405408.tip-bot2@tip-bot2>
Date: Wed, 07 Oct 2020 07:12:05 -0000
From: "tip-bot2 for Mike Travis" <tip-bot2@...utronix.de>
To: linux-tip-commits@...r.kernel.org
Cc: Mike Travis <mike.travis@....com>, Borislav Petkov <bp@...e.de>,
Dimitri Sivanich <dimitri.sivanich@....com>,
x86 <x86@...nel.org>, LKML <linux-kernel@...r.kernel.org>
Subject: [tip: x86/platform] x86/platform/uv: Remove UV BAU TLB Shootdown Handler
The following commit has been merged into the x86/platform branch of tip:
Commit-ID: 39297dde7390e01bfd737052fbb5313a09062e2d
Gitweb: https://git.kernel.org/tip/39297dde7390e01bfd737052fbb5313a09062e2d
Author: Mike Travis <mike.travis@....com>
AuthorDate: Mon, 05 Oct 2020 15:39:17 -05:00
Committer: Borislav Petkov <bp@...e.de>
CommitterDate: Wed, 07 Oct 2020 08:45:39 +02:00
x86/platform/uv: Remove UV BAU TLB Shootdown Handler
The Broadcast Assist Unit (BAU) TLB shootdown handler is being rewritten
to become the UV BAU APIC driver. It is designed to speed up sending
IPIs to selective CPUs within the system. Remove the current TLB
shutdown handler (tlb_uv.c) file and a couple of kernel hooks in the
interim.
Signed-off-by: Mike Travis <mike.travis@....com>
Signed-off-by: Borislav Petkov <bp@...e.de>
Reviewed-by: Dimitri Sivanich <dimitri.sivanich@....com>
Link: https://lkml.kernel.org/r/20201005203929.148656-2-mike.travis@hpe.com
---
arch/x86/include/asm/idtentry.h | 4 +-
arch/x86/include/asm/uv/uv.h | 4 +-
arch/x86/include/asm/uv/uv_bau.h | 755 +----------
arch/x86/kernel/idt.c | 3 +-
arch/x86/mm/tlb.c | 24 +-
arch/x86/platform/uv/Makefile | 2 +-
arch/x86/platform/uv/tlb_uv.c | 2097 +-----------------------------
7 files changed, 2 insertions(+), 2887 deletions(-)
delete mode 100644 arch/x86/include/asm/uv/uv_bau.h
delete mode 100644 arch/x86/platform/uv/tlb_uv.c
diff --git a/arch/x86/include/asm/idtentry.h b/arch/x86/include/asm/idtentry.h
index a063864..df4dc97 100644
--- a/arch/x86/include/asm/idtentry.h
+++ b/arch/x86/include/asm/idtentry.h
@@ -591,10 +591,6 @@ DECLARE_IDTENTRY_SYSVEC(CALL_FUNCTION_VECTOR, sysvec_call_function);
#endif
#ifdef CONFIG_X86_LOCAL_APIC
-# ifdef CONFIG_X86_UV
-DECLARE_IDTENTRY_SYSVEC(UV_BAU_MESSAGE, sysvec_uv_bau_message);
-# endif
-
# ifdef CONFIG_X86_MCE_THRESHOLD
DECLARE_IDTENTRY_SYSVEC(THRESHOLD_APIC_VECTOR, sysvec_threshold);
# endif
diff --git a/arch/x86/include/asm/uv/uv.h b/arch/x86/include/asm/uv/uv.h
index e48aea9..172d3e4 100644
--- a/arch/x86/include/asm/uv/uv.h
+++ b/arch/x86/include/asm/uv/uv.h
@@ -35,10 +35,8 @@ extern int is_uv_hubbed(int uvtype);
extern void uv_cpu_init(void);
extern void uv_nmi_init(void);
extern void uv_system_init(void);
-extern const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
- const struct flush_tlb_info *info);
-#else /* X86_UV */
+#else /* !X86_UV */
static inline enum uv_system_type get_uv_system_type(void) { return UV_NONE; }
static inline bool is_early_uv_system(void) { return 0; }
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
deleted file mode 100644
index cd24804..0000000
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ /dev/null
@@ -1,755 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * SGI UV Broadcast Assist Unit definitions
- *
- * Copyright (C) 2008-2011 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_X86_UV_UV_BAU_H
-#define _ASM_X86_UV_UV_BAU_H
-
-#include <linux/bitmap.h>
-#include <asm/idtentry.h>
-
-#define BITSPERBYTE 8
-
-/*
- * Broadcast Assist Unit messaging structures
- *
- * Selective Broadcast activations are induced by software action
- * specifying a particular 8-descriptor "set" via a 6-bit index written
- * to an MMR.
- * Thus there are 64 unique 512-byte sets of SB descriptors - one set for
- * each 6-bit index value. These descriptor sets are mapped in sequence
- * starting with set 0 located at the address specified in the
- * BAU_SB_DESCRIPTOR_BASE register, set 1 is located at BASE + 512,
- * set 2 is at BASE + 2*512, set 3 at BASE + 3*512, and so on.
- *
- * We will use one set for sending BAU messages from each of the
- * cpu's on the uvhub.
- *
- * TLB shootdown will use the first of the 8 descriptors of each set.
- * Each of the descriptors is 64 bytes in size (8*64 = 512 bytes in a set).
- */
-
-#define MAX_CPUS_PER_UVHUB 128
-#define MAX_CPUS_PER_SOCKET 64
-#define ADP_SZ 64 /* hardware-provided max. */
-#define UV_CPUS_PER_AS 32 /* hardware-provided max. */
-#define ITEMS_PER_DESC 8
-/* the 'throttle' to prevent the hardware stay-busy bug */
-#define MAX_BAU_CONCURRENT 3
-#define UV_ACT_STATUS_MASK 0x3
-#define UV_ACT_STATUS_SIZE 2
-#define UV_DISTRIBUTION_SIZE 256
-#define UV_SW_ACK_NPENDING 8
-#define UV_NET_ENDPOINT_INTD 0x28
-#define UV_PAYLOADQ_GNODE_SHIFT 49
-#define UV_PTC_BASENAME "sgi_uv/ptc_statistics"
-#define UV_BAU_BASENAME "sgi_uv/bau_tunables"
-#define UV_BAU_TUNABLES_DIR "sgi_uv"
-#define UV_BAU_TUNABLES_FILE "bau_tunables"
-#define WHITESPACE " \t\n"
-#define cpubit_isset(cpu, bau_local_cpumask) \
- test_bit((cpu), (bau_local_cpumask).bits)
-
-/* [19:16] SOFT_ACK timeout period 19: 1 is urgency 7 17:16 1 is multiplier */
-/*
- * UV2: Bit 19 selects between
- * (0): 10 microsecond timebase and
- * (1): 80 microseconds
- * we're using 560us
- */
-#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD (15UL)
-/* assuming UV3 is the same */
-
-#define BAU_MISC_CONTROL_MULT_MASK 3
-
-#define UVH_AGING_PRESCALE_SEL 0x000000b000UL
-/* [30:28] URGENCY_7 an index into a table of times */
-#define BAU_URGENCY_7_SHIFT 28
-#define BAU_URGENCY_7_MASK 7
-
-#define UVH_TRANSACTION_TIMEOUT 0x000000b200UL
-/* [45:40] BAU - BAU transaction timeout select - a multiplier */
-#define BAU_TRANS_SHIFT 40
-#define BAU_TRANS_MASK 0x3f
-
-/*
- * shorten some awkward names
- */
-#define AS_PUSH_SHIFT UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT
-#define SOFTACK_MSHIFT UVH_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT
-#define SOFTACK_PSHIFT UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT
-#define SOFTACK_TIMEOUT_PERIOD UV_INTD_SOFT_ACK_TIMEOUT_PERIOD
-#define PREFETCH_HINT_SHFT UV3H_LB_BAU_MISC_CONTROL_ENABLE_INTD_PREFETCH_HINT_SHFT
-#define SB_STATUS_SHFT UV3H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_SHFT
-#define write_gmmr uv_write_global_mmr64
-#define write_lmmr uv_write_local_mmr
-#define read_lmmr uv_read_local_mmr
-#define read_gmmr uv_read_global_mmr64
-
-/*
- * bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1
- */
-#define DS_IDLE 0
-#define DS_ACTIVE 1
-#define DS_DESTINATION_TIMEOUT 2
-#define DS_SOURCE_TIMEOUT 3
-/*
- * bits put together from HRP_LB_BAU_SB_ACTIVATION_STATUS_0/1/2
- * values 1 and 3 will not occur
- * Decoded meaning ERROR BUSY AUX ERR
- * ------------------------------- ---- ----- -------
- * IDLE 0 0 0
- * BUSY (active) 0 1 0
- * SW Ack Timeout (destination) 1 0 0
- * SW Ack INTD rejected (strong NACK) 1 0 1
- * Source Side Time Out Detected 1 1 0
- * Destination Side PUT Failed 1 1 1
- */
-#define UV2H_DESC_IDLE 0
-#define UV2H_DESC_BUSY 2
-#define UV2H_DESC_DEST_TIMEOUT 4
-#define UV2H_DESC_DEST_STRONG_NACK 5
-#define UV2H_DESC_SOURCE_TIMEOUT 6
-#define UV2H_DESC_DEST_PUT_ERR 7
-
-/*
- * delay for 'plugged' timeout retries, in microseconds
- */
-#define PLUGGED_DELAY 10
-
-/*
- * threshholds at which to use IPI to free resources
- */
-/* after this # consecutive 'plugged' timeouts, use IPI to release resources */
-#define PLUGSB4RESET 100
-/* after this many consecutive timeouts, use IPI to release resources */
-#define TIMEOUTSB4RESET 1
-/* at this number uses of IPI to release resources, giveup the request */
-#define IPI_RESET_LIMIT 1
-/* after this # consecutive successes, bump up the throttle if it was lowered */
-#define COMPLETE_THRESHOLD 5
-/* after this # of giveups (fall back to kernel IPI's) disable the use of
- the BAU for a period of time */
-#define GIVEUP_LIMIT 100
-
-#define UV_LB_SUBNODEID 0x10
-
-#define UV_SA_SHFT UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT
-#define UV_SA_MASK UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK
-/* 4 bits of software ack period */
-#define UV2_ACK_MASK 0x7UL
-#define UV2_ACK_UNITS_SHFT 3
-#define UV2_EXT_SHFT UV2H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_SHFT
-
-/*
- * number of entries in the destination side payload queue
- */
-#define DEST_Q_SIZE 20
-/*
- * number of destination side software ack resources
- */
-#define DEST_NUM_RESOURCES 8
-/*
- * completion statuses for sending a TLB flush message
- */
-#define FLUSH_RETRY_PLUGGED 1
-#define FLUSH_RETRY_TIMEOUT 2
-#define FLUSH_GIVEUP 3
-#define FLUSH_COMPLETE 4
-
-/*
- * tuning the action when the numalink network is extremely delayed
- */
-#define CONGESTED_RESPONSE_US 1000 /* 'long' response time, in
- microseconds */
-#define CONGESTED_REPS 10 /* long delays averaged over
- this many broadcasts */
-#define DISABLED_PERIOD 10 /* time for the bau to be
- disabled, in seconds */
-/* see msg_type: */
-#define MSG_NOOP 0
-#define MSG_REGULAR 1
-#define MSG_RETRY 2
-
-#define BAU_DESC_QUALIFIER 0x534749
-
-enum uv_bau_version {
- UV_BAU_V2 = 2,
- UV_BAU_V3,
- UV_BAU_V4,
-};
-
-/*
- * Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor)
- * If the 'multilevel' flag in the header portion of the descriptor
- * has been set to 0, then endpoint multi-unicast mode is selected.
- * The distribution specification (32 bytes) is interpreted as a 256-bit
- * distribution vector. Adjacent bits correspond to consecutive even numbered
- * nodeIDs. The result of adding the index of a given bit to the 15-bit
- * 'base_dest_nasid' field of the header corresponds to the
- * destination nodeID associated with that specified bit.
- */
-struct pnmask {
- unsigned long bits[BITS_TO_LONGS(UV_DISTRIBUTION_SIZE)];
-};
-
-/*
- * mask of cpu's on a uvhub
- * (during initialization we need to check that unsigned long has
- * enough bits for max. cpu's per uvhub)
- */
-struct bau_local_cpumask {
- unsigned long bits;
-};
-
-/*
- * Payload: 16 bytes (128 bits) (bytes 0x20-0x2f of descriptor)
- * only 12 bytes (96 bits) of the payload area are usable.
- * An additional 3 bytes (bits 27:4) of the header address are carried
- * to the next bytes of the destination payload queue.
- * And an additional 2 bytes of the header Suppl_A field are also
- * carried to the destination payload queue.
- * But the first byte of the Suppl_A becomes bits 127:120 (the 16th byte)
- * of the destination payload queue, which is written by the hardware
- * with the s/w ack resource bit vector.
- * [ effective message contents (16 bytes (128 bits) maximum), not counting
- * the s/w ack bit vector ]
- */
-
-/**
- * struct uv2_3_bau_msg_payload - defines payload for INTD transactions
- * @address: Signifies a page or all TLB's of the cpu
- * @sending_cpu: CPU from which the message originates
- * @acknowledge_count: CPUs on the destination Hub that received the interrupt
- */
-struct uv2_3_bau_msg_payload {
- u64 address;
- u16 sending_cpu;
- u16 acknowledge_count;
-};
-
-/**
- * struct uv4_bau_msg_payload - defines payload for INTD transactions
- * @address: Signifies a page or all TLB's of the cpu
- * @sending_cpu: CPU from which the message originates
- * @acknowledge_count: CPUs on the destination Hub that received the interrupt
- * @qualifier: Set by source to verify origin of INTD broadcast
- */
-struct uv4_bau_msg_payload {
- u64 address;
- u16 sending_cpu;
- u16 acknowledge_count;
- u32 reserved:8;
- u32 qualifier:24;
-};
-
-/*
- * UV2 Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor)
- * see figure 9-2 of harp_sys.pdf
- * assuming UV3 is the same
- */
-struct uv2_3_bau_msg_header {
- unsigned int base_dest_nasid:15; /* nasid of the first bit */
- /* bits 14:0 */ /* in uvhub map */
- unsigned int dest_subnodeid:5; /* must be 0x10, for the LB */
- /* bits 19:15 */
- unsigned int rsvd_1:1; /* must be zero */
- /* bit 20 */
- /* Address bits 59:21 */
- /* bits 25:2 of address (44:21) are payload */
- /* these next 24 bits become bytes 12-14 of msg */
- /* bits 28:21 land in byte 12 */
- unsigned int replied_to:1; /* sent as 0 by the source to
- byte 12 */
- /* bit 21 */
- unsigned int msg_type:3; /* software type of the
- message */
- /* bits 24:22 */
- unsigned int canceled:1; /* message canceled, resource
- is to be freed*/
- /* bit 25 */
- unsigned int payload_1:3; /* not currently used */
- /* bits 28:26 */
-
- /* bits 36:29 land in byte 13 */
- unsigned int payload_2a:3; /* not currently used */
- unsigned int payload_2b:5; /* not currently used */
- /* bits 36:29 */
-
- /* bits 44:37 land in byte 14 */
- unsigned int payload_3:8; /* not currently used */
- /* bits 44:37 */
-
- unsigned int rsvd_2:7; /* reserved */
- /* bits 51:45 */
- unsigned int swack_flag:1; /* software acknowledge flag */
- /* bit 52 */
- unsigned int rsvd_3a:3; /* must be zero */
- unsigned int rsvd_3b:8; /* must be zero */
- unsigned int rsvd_3c:8; /* must be zero */
- unsigned int rsvd_3d:3; /* must be zero */
- /* bits 74:53 */
- unsigned int fairness:3; /* usually zero */
- /* bits 77:75 */
-
- unsigned int sequence:16; /* message sequence number */
- /* bits 93:78 Suppl_A */
- unsigned int chaining:1; /* next descriptor is part of
- this activation*/
- /* bit 94 */
- unsigned int multilevel:1; /* multi-level multicast
- format */
- /* bit 95 */
- unsigned int rsvd_4:24; /* ordered / source node /
- source subnode / aging
- must be zero */
- /* bits 119:96 */
- unsigned int command:8; /* message type */
- /* bits 127:120 */
-};
-
-/*
- * The activation descriptor:
- * The format of the message to send, plus all accompanying control
- * Should be 64 bytes
- */
-struct bau_desc {
- struct pnmask distribution;
- /*
- * message template, consisting of header and payload:
- */
- union bau_msg_header {
- struct uv2_3_bau_msg_header uv2_3_hdr;
- } header;
-
- union bau_payload_header {
- struct uv2_3_bau_msg_payload uv2_3;
- struct uv4_bau_msg_payload uv4;
- } payload;
-};
-/* UV2:
- * -payload-- ---------header------
- * bytes 0-11 bits 70-78 bits 21-44
- * A B (2) C (3)
- *
- * A/B/C are moved to:
- * A C B
- * bytes 0-11 bytes 12-14 bytes 16-17 (byte 15 filled in by hw as vector)
- * ------------payload queue-----------
- */
-
-/*
- * The payload queue on the destination side is an array of these.
- * With BAU_MISC_CONTROL set for software acknowledge mode, the messages
- * are 32 bytes (2 micropackets) (256 bits) in length, but contain only 17
- * bytes of usable data, including the sw ack vector in byte 15 (bits 127:120)
- * (12 bytes come from bau_msg_payload, 3 from payload_1, 2 from
- * swack_vec and payload_2)
- * "Enabling Software Acknowledgment mode (see Section 4.3.3 Software
- * Acknowledge Processing) also selects 32 byte (17 bytes usable) payload
- * operation."
- */
-struct bau_pq_entry {
- unsigned long address; /* signifies a page or all TLB's
- of the cpu */
- /* 64 bits, bytes 0-7 */
- unsigned short sending_cpu; /* cpu that sent the message */
- /* 16 bits, bytes 8-9 */
- unsigned short acknowledge_count; /* filled in by destination */
- /* 16 bits, bytes 10-11 */
- /* these next 3 bytes come from bits 58-81 of the message header */
- unsigned short replied_to:1; /* sent as 0 by the source */
- unsigned short msg_type:3; /* software message type */
- unsigned short canceled:1; /* sent as 0 by the source */
- unsigned short unused1:3; /* not currently using */
- /* byte 12 */
- unsigned char unused2a; /* not currently using */
- /* byte 13 */
- unsigned char unused2; /* not currently using */
- /* byte 14 */
- unsigned char swack_vec; /* filled in by the hardware */
- /* byte 15 (bits 127:120) */
- unsigned short sequence; /* message sequence number */
- /* bytes 16-17 */
- unsigned char unused4[2]; /* not currently using bytes 18-19 */
- /* bytes 18-19 */
- int number_of_cpus; /* filled in at destination */
- /* 32 bits, bytes 20-23 (aligned) */
- unsigned char unused5[8]; /* not using */
- /* bytes 24-31 */
-};
-
-struct msg_desc {
- struct bau_pq_entry *msg;
- int msg_slot;
- struct bau_pq_entry *queue_first;
- struct bau_pq_entry *queue_last;
-};
-
-struct reset_args {
- int sender;
-};
-
-/*
- * This structure is allocated per_cpu for UV TLB shootdown statistics.
- */
-struct ptc_stats {
- /* sender statistics */
- unsigned long s_giveup; /* number of fall backs to
- IPI-style flushes */
- unsigned long s_requestor; /* number of shootdown
- requests */
- unsigned long s_stimeout; /* source side timeouts */
- unsigned long s_dtimeout; /* destination side timeouts */
- unsigned long s_strongnacks; /* number of strong nack's */
- unsigned long s_time; /* time spent in sending side */
- unsigned long s_retriesok; /* successful retries */
- unsigned long s_ntargcpu; /* total number of cpu's
- targeted */
- unsigned long s_ntargself; /* times the sending cpu was
- targeted */
- unsigned long s_ntarglocals; /* targets of cpus on the local
- blade */
- unsigned long s_ntargremotes; /* targets of cpus on remote
- blades */
- unsigned long s_ntarglocaluvhub; /* targets of the local hub */
- unsigned long s_ntargremoteuvhub; /* remotes hubs targeted */
- unsigned long s_ntarguvhub; /* total number of uvhubs
- targeted */
- unsigned long s_ntarguvhub16; /* number of times target
- hubs >= 16*/
- unsigned long s_ntarguvhub8; /* number of times target
- hubs >= 8 */
- unsigned long s_ntarguvhub4; /* number of times target
- hubs >= 4 */
- unsigned long s_ntarguvhub2; /* number of times target
- hubs >= 2 */
- unsigned long s_ntarguvhub1; /* number of times target
- hubs == 1 */
- unsigned long s_resets_plug; /* ipi-style resets from plug
- state */
- unsigned long s_resets_timeout; /* ipi-style resets from
- timeouts */
- unsigned long s_busy; /* status stayed busy past
- s/w timer */
- unsigned long s_throttles; /* waits in throttle */
- unsigned long s_retry_messages; /* retry broadcasts */
- unsigned long s_bau_reenabled; /* for bau enable/disable */
- unsigned long s_bau_disabled; /* for bau enable/disable */
- unsigned long s_uv2_wars; /* uv2 workaround, perm. busy */
- unsigned long s_uv2_wars_hw; /* uv2 workaround, hiwater */
- unsigned long s_uv2_war_waits; /* uv2 workaround, long waits */
- unsigned long s_overipilimit; /* over the ipi reset limit */
- unsigned long s_giveuplimit; /* disables, over giveup limit*/
- unsigned long s_enters; /* entries to the driver */
- unsigned long s_ipifordisabled; /* fall back to IPI; disabled */
- unsigned long s_plugged; /* plugged by h/w bug*/
- unsigned long s_congested; /* giveup on long wait */
- /* destination statistics */
- unsigned long d_alltlb; /* times all tlb's on this
- cpu were flushed */
- unsigned long d_onetlb; /* times just one tlb on this
- cpu was flushed */
- unsigned long d_multmsg; /* interrupts with multiple
- messages */
- unsigned long d_nomsg; /* interrupts with no message */
- unsigned long d_time; /* time spent on destination
- side */
- unsigned long d_requestee; /* number of messages
- processed */
- unsigned long d_retries; /* number of retry messages
- processed */
- unsigned long d_canceled; /* number of messages canceled
- by retries */
- unsigned long d_nocanceled; /* retries that found nothing
- to cancel */
- unsigned long d_resets; /* number of ipi-style requests
- processed */
- unsigned long d_rcanceled; /* number of messages canceled
- by resets */
-};
-
-struct tunables {
- int *tunp;
- int deflt;
-};
-
-struct hub_and_pnode {
- short uvhub;
- short pnode;
-};
-
-struct socket_desc {
- short num_cpus;
- short cpu_number[MAX_CPUS_PER_SOCKET];
-};
-
-struct uvhub_desc {
- unsigned short socket_mask;
- short num_cpus;
- short uvhub;
- short pnode;
- struct socket_desc socket[2];
-};
-
-/**
- * struct bau_control
- * @status_mmr: location of status mmr, determined by uvhub_cpu
- * @status_index: index of ERR|BUSY bits in status mmr, determined by uvhub_cpu
- *
- * Per-cpu control struct containing CPU topology information and BAU tuneables.
- */
-struct bau_control {
- struct bau_desc *descriptor_base;
- struct bau_pq_entry *queue_first;
- struct bau_pq_entry *queue_last;
- struct bau_pq_entry *bau_msg_head;
- struct bau_control *uvhub_master;
- struct bau_control *socket_master;
- struct ptc_stats *statp;
- cpumask_t *cpumask;
- unsigned long timeout_interval;
- unsigned long set_bau_on_time;
- atomic_t active_descriptor_count;
- int plugged_tries;
- int timeout_tries;
- int ipi_attempts;
- int conseccompletes;
- u64 status_mmr;
- int status_index;
- bool nobau;
- short baudisabled;
- short cpu;
- short osnode;
- short uvhub_cpu;
- short uvhub;
- short uvhub_version;
- short cpus_in_socket;
- short cpus_in_uvhub;
- short partition_base_pnode;
- short busy; /* all were busy (war) */
- unsigned short message_number;
- unsigned short uvhub_quiesce;
- short socket_acknowledge_count[DEST_Q_SIZE];
- cycles_t send_message;
- cycles_t period_end;
- cycles_t period_time;
- spinlock_t uvhub_lock;
- spinlock_t queue_lock;
- spinlock_t disable_lock;
- /* tunables */
- int max_concurr;
- int max_concurr_const;
- int plugged_delay;
- int plugsb4reset;
- int timeoutsb4reset;
- int ipi_reset_limit;
- int complete_threshold;
- int cong_response_us;
- int cong_reps;
- cycles_t disabled_period;
- int period_giveups;
- int giveup_limit;
- long period_requests;
- struct hub_and_pnode *thp;
-};
-
-/* Abstracted BAU functions */
-struct bau_operations {
- unsigned long (*read_l_sw_ack)(void);
- unsigned long (*read_g_sw_ack)(int pnode);
- unsigned long (*bau_gpa_to_offset)(unsigned long vaddr);
- void (*write_l_sw_ack)(unsigned long mmr);
- void (*write_g_sw_ack)(int pnode, unsigned long mmr);
- void (*write_payload_first)(int pnode, unsigned long mmr);
- void (*write_payload_last)(int pnode, unsigned long mmr);
- int (*wait_completion)(struct bau_desc*,
- struct bau_control*, long try);
-};
-
-static inline void write_mmr_data_broadcast(int pnode, unsigned long mmr_image)
-{
- write_gmmr(pnode, UVH_BAU_DATA_BROADCAST, mmr_image);
-}
-
-static inline void write_mmr_descriptor_base(int pnode, unsigned long mmr_image)
-{
- write_gmmr(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE, mmr_image);
-}
-
-static inline void write_mmr_activation(unsigned long index)
-{
- write_lmmr(UVH_LB_BAU_SB_ACTIVATION_CONTROL, index);
-}
-
-static inline void write_gmmr_activation(int pnode, unsigned long mmr_image)
-{
- write_gmmr(pnode, UVH_LB_BAU_SB_ACTIVATION_CONTROL, mmr_image);
-}
-
-static inline void write_mmr_proc_payload_first(int pnode, unsigned long mmr_image)
-{
- write_gmmr(pnode, UV4H_LB_PROC_INTD_QUEUE_FIRST, mmr_image);
-}
-
-static inline void write_mmr_proc_payload_last(int pnode, unsigned long mmr_image)
-{
- write_gmmr(pnode, UV4H_LB_PROC_INTD_QUEUE_LAST, mmr_image);
-}
-
-static inline void write_mmr_payload_first(int pnode, unsigned long mmr_image)
-{
- write_gmmr(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, mmr_image);
-}
-
-static inline void write_mmr_payload_tail(int pnode, unsigned long mmr_image)
-{
- write_gmmr(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL, mmr_image);
-}
-
-static inline void write_mmr_payload_last(int pnode, unsigned long mmr_image)
-{
- write_gmmr(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST, mmr_image);
-}
-
-static inline void write_mmr_misc_control(int pnode, unsigned long mmr_image)
-{
- write_gmmr(pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
-}
-
-static inline unsigned long read_mmr_misc_control(int pnode)
-{
- return read_gmmr(pnode, UVH_LB_BAU_MISC_CONTROL);
-}
-
-static inline void write_mmr_sw_ack(unsigned long mr)
-{
- uv_write_local_mmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, mr);
-}
-
-static inline void write_gmmr_sw_ack(int pnode, unsigned long mr)
-{
- write_gmmr(pnode, UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, mr);
-}
-
-static inline unsigned long read_mmr_sw_ack(void)
-{
- return read_lmmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE);
-}
-
-static inline unsigned long read_gmmr_sw_ack(int pnode)
-{
- return read_gmmr(pnode, UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE);
-}
-
-static inline void write_mmr_proc_sw_ack(unsigned long mr)
-{
- uv_write_local_mmr(UV4H_LB_PROC_INTD_SOFT_ACK_CLEAR, mr);
-}
-
-static inline void write_gmmr_proc_sw_ack(int pnode, unsigned long mr)
-{
- write_gmmr(pnode, UV4H_LB_PROC_INTD_SOFT_ACK_CLEAR, mr);
-}
-
-static inline unsigned long read_mmr_proc_sw_ack(void)
-{
- return read_lmmr(UV4H_LB_PROC_INTD_SOFT_ACK_PENDING);
-}
-
-static inline unsigned long read_gmmr_proc_sw_ack(int pnode)
-{
- return read_gmmr(pnode, UV4H_LB_PROC_INTD_SOFT_ACK_PENDING);
-}
-
-static inline void write_mmr_data_config(int pnode, unsigned long mr)
-{
- uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, mr);
-}
-
-static inline int bau_uvhub_isset(int uvhub, struct pnmask *dstp)
-{
- return constant_test_bit(uvhub, &dstp->bits[0]);
-}
-static inline void bau_uvhub_set(int pnode, struct pnmask *dstp)
-{
- __set_bit(pnode, &dstp->bits[0]);
-}
-static inline void bau_uvhubs_clear(struct pnmask *dstp,
- int nbits)
-{
- bitmap_zero(&dstp->bits[0], nbits);
-}
-static inline int bau_uvhub_weight(struct pnmask *dstp)
-{
- return bitmap_weight((unsigned long *)&dstp->bits[0],
- UV_DISTRIBUTION_SIZE);
-}
-
-static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits)
-{
- bitmap_zero(&dstp->bits, nbits);
-}
-
-struct atomic_short {
- short counter;
-};
-
-/*
- * atomic_read_short - read a short atomic variable
- * @v: pointer of type atomic_short
- *
- * Atomically reads the value of @v.
- */
-static inline int atomic_read_short(const struct atomic_short *v)
-{
- return v->counter;
-}
-
-/*
- * atom_asr - add and return a short int
- * @i: short value to add
- * @v: pointer of type atomic_short
- *
- * Atomically adds @i to @v and returns @i + @v
- */
-static inline int atom_asr(short i, struct atomic_short *v)
-{
- short __i = i;
- asm volatile(LOCK_PREFIX "xaddw %0, %1"
- : "+r" (i), "+m" (v->counter)
- : : "memory");
- return i + __i;
-}
-
-/*
- * conditionally add 1 to *v, unless *v is >= u
- * return 0 if we cannot add 1 to *v because it is >= u
- * return 1 if we can add 1 to *v because it is < u
- * the add is atomic
- *
- * This is close to atomic_add_unless(), but this allows the 'u' value
- * to be lowered below the current 'v'. atomic_add_unless can only stop
- * on equal.
- */
-static inline int atomic_inc_unless_ge(spinlock_t *lock, atomic_t *v, int u)
-{
- spin_lock(lock);
- if (atomic_read(v) >= u) {
- spin_unlock(lock);
- return 0;
- }
- atomic_inc(v);
- spin_unlock(lock);
- return 1;
-}
-
-void uv_bau_message_interrupt(struct pt_regs *regs);
-
-#endif /* _ASM_X86_UV_UV_BAU_H */
diff --git a/arch/x86/kernel/idt.c b/arch/x86/kernel/idt.c
index 7ecf9ba..1bffb87 100644
--- a/arch/x86/kernel/idt.c
+++ b/arch/x86/kernel/idt.c
@@ -149,9 +149,6 @@ static const __initconst struct idt_data apic_idts[] = {
# ifdef CONFIG_IRQ_WORK
INTG(IRQ_WORK_VECTOR, asm_sysvec_irq_work),
# endif
-# ifdef CONFIG_X86_UV
- INTG(UV_BAU_MESSAGE, asm_sysvec_uv_bau_message),
-# endif
INTG(SPURIOUS_APIC_VECTOR, asm_sysvec_spurious_apic_interrupt),
INTG(ERROR_APIC_VECTOR, asm_sysvec_error_interrupt),
#endif
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 0951b47..11666ba 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -14,7 +14,6 @@
#include <asm/nospec-branch.h>
#include <asm/cache.h>
#include <asm/apic.h>
-#include <asm/uv/uv.h>
#include "mm_internal.h"
@@ -800,29 +799,6 @@ STATIC_NOPV void native_flush_tlb_others(const struct cpumask *cpumask,
trace_tlb_flush(TLB_REMOTE_SEND_IPI,
(info->end - info->start) >> PAGE_SHIFT);
- if (is_uv_system()) {
- /*
- * This whole special case is confused. UV has a "Broadcast
- * Assist Unit", which seems to be a fancy way to send IPIs.
- * Back when x86 used an explicit TLB flush IPI, UV was
- * optimized to use its own mechanism. These days, x86 uses
- * smp_call_function_many(), but UV still uses a manual IPI,
- * and that IPI's action is out of date -- it does a manual
- * flush instead of calling flush_tlb_func_remote(). This
- * means that the percpu tlb_gen variables won't be updated
- * and we'll do pointless flushes on future context switches.
- *
- * Rather than hooking native_flush_tlb_others() here, I think
- * that UV should be updated so that smp_call_function_many(),
- * etc, are optimal on UV.
- */
- cpumask = uv_flush_tlb_others(cpumask, info);
- if (cpumask)
- smp_call_function_many(cpumask, flush_tlb_func_remote,
- (void *)info, 1);
- return;
- }
-
/*
* If no page tables were freed, we can skip sending IPIs to
* CPUs in lazy TLB mode. They will flush the CPU themselves
diff --git a/arch/x86/platform/uv/Makefile b/arch/x86/platform/uv/Makefile
index a3693c8..224ff05 100644
--- a/arch/x86/platform/uv/Makefile
+++ b/arch/x86/platform/uv/Makefile
@@ -1,2 +1,2 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_X86_UV) += tlb_uv.o bios_uv.o uv_irq.o uv_sysfs.o uv_time.o uv_nmi.o
+obj-$(CONFIG_X86_UV) += bios_uv.o uv_irq.o uv_sysfs.o uv_time.o uv_nmi.o
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
deleted file mode 100644
index 62ea907..0000000
--- a/arch/x86/platform/uv/tlb_uv.c
+++ /dev/null
@@ -1,2097 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SGI UltraViolet TLB flush routines.
- *
- * (c) 2008-2014 Cliff Wickman <cpw@....com>, SGI.
- */
-#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
-#include <linux/debugfs.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-#include <asm/mmu_context.h>
-#include <asm/uv/uv.h>
-#include <asm/uv/uv_mmrs.h>
-#include <asm/uv/uv_hub.h>
-#include <asm/uv/uv_bau.h>
-#include <asm/apic.h>
-#include <asm/tsc.h>
-#include <asm/irq_vectors.h>
-#include <asm/timer.h>
-
-static struct bau_operations ops __ro_after_init;
-
-static int timeout_us;
-static bool nobau = true;
-static int nobau_perm;
-
-/* tunables: */
-static int max_concurr = MAX_BAU_CONCURRENT;
-static int max_concurr_const = MAX_BAU_CONCURRENT;
-static int plugged_delay = PLUGGED_DELAY;
-static int plugsb4reset = PLUGSB4RESET;
-static int giveup_limit = GIVEUP_LIMIT;
-static int timeoutsb4reset = TIMEOUTSB4RESET;
-static int ipi_reset_limit = IPI_RESET_LIMIT;
-static int complete_threshold = COMPLETE_THRESHOLD;
-static int congested_respns_us = CONGESTED_RESPONSE_US;
-static int congested_reps = CONGESTED_REPS;
-static int disabled_period = DISABLED_PERIOD;
-
-static struct tunables tunables[] = {
- {&max_concurr, MAX_BAU_CONCURRENT}, /* must be [0] */
- {&plugged_delay, PLUGGED_DELAY},
- {&plugsb4reset, PLUGSB4RESET},
- {&timeoutsb4reset, TIMEOUTSB4RESET},
- {&ipi_reset_limit, IPI_RESET_LIMIT},
- {&complete_threshold, COMPLETE_THRESHOLD},
- {&congested_respns_us, CONGESTED_RESPONSE_US},
- {&congested_reps, CONGESTED_REPS},
- {&disabled_period, DISABLED_PERIOD},
- {&giveup_limit, GIVEUP_LIMIT}
-};
-
-static struct dentry *tunables_dir;
-
-/* these correspond to the statistics printed by ptc_seq_show() */
-static char *stat_description[] = {
- "sent: number of shootdown messages sent",
- "stime: time spent sending messages",
- "numuvhubs: number of hubs targeted with shootdown",
- "numuvhubs16: number times 16 or more hubs targeted",
- "numuvhubs8: number times 8 or more hubs targeted",
- "numuvhubs4: number times 4 or more hubs targeted",
- "numuvhubs2: number times 2 or more hubs targeted",
- "numuvhubs1: number times 1 hub targeted",
- "numcpus: number of cpus targeted with shootdown",
- "dto: number of destination timeouts",
- "retries: destination timeout retries sent",
- "rok: : destination timeouts successfully retried",
- "resetp: ipi-style resource resets for plugs",
- "resett: ipi-style resource resets for timeouts",
- "giveup: fall-backs to ipi-style shootdowns",
- "sto: number of source timeouts",
- "bz: number of stay-busy's",
- "throt: number times spun in throttle",
- "swack: image of UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE",
- "recv: shootdown messages received",
- "rtime: time spent processing messages",
- "all: shootdown all-tlb messages",
- "one: shootdown one-tlb messages",
- "mult: interrupts that found multiple messages",
- "none: interrupts that found no messages",
- "retry: number of retry messages processed",
- "canc: number messages canceled by retries",
- "nocan: number retries that found nothing to cancel",
- "reset: number of ipi-style reset requests processed",
- "rcan: number messages canceled by reset requests",
- "disable: number times use of the BAU was disabled",
- "enable: number times use of the BAU was re-enabled"
-};
-
-static int __init setup_bau(char *arg)
-{
- int result;
-
- if (!arg)
- return -EINVAL;
-
- result = strtobool(arg, &nobau);
- if (result)
- return result;
-
- /* we need to flip the logic here, so that bau=y sets nobau to false */
- nobau = !nobau;
-
- if (!nobau)
- pr_info("UV BAU Enabled\n");
- else
- pr_info("UV BAU Disabled\n");
-
- return 0;
-}
-early_param("bau", setup_bau);
-
-/* base pnode in this partition */
-static int uv_base_pnode __read_mostly;
-
-static DEFINE_PER_CPU(struct ptc_stats, ptcstats);
-static DEFINE_PER_CPU(struct bau_control, bau_control);
-static DEFINE_PER_CPU(cpumask_var_t, uv_flush_tlb_mask);
-
-static void
-set_bau_on(void)
-{
- int cpu;
- struct bau_control *bcp;
-
- if (nobau_perm) {
- pr_info("BAU not initialized; cannot be turned on\n");
- return;
- }
- nobau = false;
- for_each_present_cpu(cpu) {
- bcp = &per_cpu(bau_control, cpu);
- bcp->nobau = false;
- }
- pr_info("BAU turned on\n");
- return;
-}
-
-static void
-set_bau_off(void)
-{
- int cpu;
- struct bau_control *bcp;
-
- nobau = true;
- for_each_present_cpu(cpu) {
- bcp = &per_cpu(bau_control, cpu);
- bcp->nobau = true;
- }
- pr_info("BAU turned off\n");
- return;
-}
-
-/*
- * Determine the first node on a uvhub. 'Nodes' are used for kernel
- * memory allocation.
- */
-static int __init uvhub_to_first_node(int uvhub)
-{
- int node, b;
-
- for_each_online_node(node) {
- b = uv_node_to_blade_id(node);
- if (uvhub == b)
- return node;
- }
- return -1;
-}
-
-/*
- * Determine the apicid of the first cpu on a uvhub.
- */
-static int __init uvhub_to_first_apicid(int uvhub)
-{
- int cpu;
-
- for_each_present_cpu(cpu)
- if (uvhub == uv_cpu_to_blade_id(cpu))
- return per_cpu(x86_cpu_to_apicid, cpu);
- return -1;
-}
-
-/*
- * Free a software acknowledge hardware resource by clearing its Pending
- * bit. This will return a reply to the sender.
- * If the message has timed out, a reply has already been sent by the
- * hardware but the resource has not been released. In that case our
- * clear of the Timeout bit (as well) will free the resource. No reply will
- * be sent (the hardware will only do one reply per message).
- */
-static void reply_to_message(struct msg_desc *mdp, struct bau_control *bcp,
- int do_acknowledge)
-{
- unsigned long dw;
- struct bau_pq_entry *msg;
-
- msg = mdp->msg;
- if (!msg->canceled && do_acknowledge) {
- dw = (msg->swack_vec << UV_SW_ACK_NPENDING) | msg->swack_vec;
- ops.write_l_sw_ack(dw);
- }
- msg->replied_to = 1;
- msg->swack_vec = 0;
-}
-
-/*
- * Process the receipt of a RETRY message
- */
-static void bau_process_retry_msg(struct msg_desc *mdp,
- struct bau_control *bcp)
-{
- int i;
- int cancel_count = 0;
- unsigned long msg_res;
- unsigned long mmr = 0;
- struct bau_pq_entry *msg = mdp->msg;
- struct bau_pq_entry *msg2;
- struct ptc_stats *stat = bcp->statp;
-
- stat->d_retries++;
- /*
- * cancel any message from msg+1 to the retry itself
- */
- for (msg2 = msg+1, i = 0; i < DEST_Q_SIZE; msg2++, i++) {
- if (msg2 > mdp->queue_last)
- msg2 = mdp->queue_first;
- if (msg2 == msg)
- break;
-
- /* same conditions for cancellation as do_reset */
- if ((msg2->replied_to == 0) && (msg2->canceled == 0) &&
- (msg2->swack_vec) && ((msg2->swack_vec &
- msg->swack_vec) == 0) &&
- (msg2->sending_cpu == msg->sending_cpu) &&
- (msg2->msg_type != MSG_NOOP)) {
- mmr = ops.read_l_sw_ack();
- msg_res = msg2->swack_vec;
- /*
- * This is a message retry; clear the resources held
- * by the previous message only if they timed out.
- * If it has not timed out we have an unexpected
- * situation to report.
- */
- if (mmr & (msg_res << UV_SW_ACK_NPENDING)) {
- unsigned long mr;
- /*
- * Is the resource timed out?
- * Make everyone ignore the cancelled message.
- */
- msg2->canceled = 1;
- stat->d_canceled++;
- cancel_count++;
- mr = (msg_res << UV_SW_ACK_NPENDING) | msg_res;
- ops.write_l_sw_ack(mr);
- }
- }
- }
- if (!cancel_count)
- stat->d_nocanceled++;
-}
-
-/*
- * Do all the things a cpu should do for a TLB shootdown message.
- * Other cpu's may come here at the same time for this message.
- */
-static void bau_process_message(struct msg_desc *mdp, struct bau_control *bcp,
- int do_acknowledge)
-{
- short socket_ack_count = 0;
- short *sp;
- struct atomic_short *asp;
- struct ptc_stats *stat = bcp->statp;
- struct bau_pq_entry *msg = mdp->msg;
- struct bau_control *smaster = bcp->socket_master;
-
- /*
- * This must be a normal message, or retry of a normal message
- */
- if (msg->address == TLB_FLUSH_ALL) {
- flush_tlb_local();
- stat->d_alltlb++;
- } else {
- flush_tlb_one_user(msg->address);
- stat->d_onetlb++;
- }
- stat->d_requestee++;
-
- /*
- * One cpu on each uvhub has the additional job on a RETRY
- * of releasing the resource held by the message that is
- * being retried. That message is identified by sending
- * cpu number.
- */
- if (msg->msg_type == MSG_RETRY && bcp == bcp->uvhub_master)
- bau_process_retry_msg(mdp, bcp);
-
- /*
- * This is a swack message, so we have to reply to it.
- * Count each responding cpu on the socket. This avoids
- * pinging the count's cache line back and forth between
- * the sockets.
- */
- sp = &smaster->socket_acknowledge_count[mdp->msg_slot];
- asp = (struct atomic_short *)sp;
- socket_ack_count = atom_asr(1, asp);
- if (socket_ack_count == bcp->cpus_in_socket) {
- int msg_ack_count;
- /*
- * Both sockets dump their completed count total into
- * the message's count.
- */
- *sp = 0;
- asp = (struct atomic_short *)&msg->acknowledge_count;
- msg_ack_count = atom_asr(socket_ack_count, asp);
-
- if (msg_ack_count == bcp->cpus_in_uvhub) {
- /*
- * All cpus in uvhub saw it; reply
- * (unless we are in the UV2 workaround)
- */
- reply_to_message(mdp, bcp, do_acknowledge);
- }
- }
-
- return;
-}
-
-/*
- * Determine the first cpu on a pnode.
- */
-static int pnode_to_first_cpu(int pnode, struct bau_control *smaster)
-{
- int cpu;
- struct hub_and_pnode *hpp;
-
- for_each_present_cpu(cpu) {
- hpp = &smaster->thp[cpu];
- if (pnode == hpp->pnode)
- return cpu;
- }
- return -1;
-}
-
-/*
- * Last resort when we get a large number of destination timeouts is
- * to clear resources held by a given cpu.
- * Do this with IPI so that all messages in the BAU message queue
- * can be identified by their nonzero swack_vec field.
- *
- * This is entered for a single cpu on the uvhub.
- * The sender want's this uvhub to free a specific message's
- * swack resources.
- */
-static void do_reset(void *ptr)
-{
- int i;
- struct bau_control *bcp = &per_cpu(bau_control, smp_processor_id());
- struct reset_args *rap = (struct reset_args *)ptr;
- struct bau_pq_entry *msg;
- struct ptc_stats *stat = bcp->statp;
-
- stat->d_resets++;
- /*
- * We're looking for the given sender, and
- * will free its swack resource.
- * If all cpu's finally responded after the timeout, its
- * message 'replied_to' was set.
- */
- for (msg = bcp->queue_first, i = 0; i < DEST_Q_SIZE; msg++, i++) {
- unsigned long msg_res;
- /* do_reset: same conditions for cancellation as
- bau_process_retry_msg() */
- if ((msg->replied_to == 0) &&
- (msg->canceled == 0) &&
- (msg->sending_cpu == rap->sender) &&
- (msg->swack_vec) &&
- (msg->msg_type != MSG_NOOP)) {
- unsigned long mmr;
- unsigned long mr;
- /*
- * make everyone else ignore this message
- */
- msg->canceled = 1;
- /*
- * only reset the resource if it is still pending
- */
- mmr = ops.read_l_sw_ack();
- msg_res = msg->swack_vec;
- mr = (msg_res << UV_SW_ACK_NPENDING) | msg_res;
- if (mmr & msg_res) {
- stat->d_rcanceled++;
- ops.write_l_sw_ack(mr);
- }
- }
- }
- return;
-}
-
-/*
- * Use IPI to get all target uvhubs to release resources held by
- * a given sending cpu number.
- */
-static void reset_with_ipi(struct pnmask *distribution, struct bau_control *bcp)
-{
- int pnode;
- int apnode;
- int maskbits;
- int sender = bcp->cpu;
- cpumask_t *mask = bcp->uvhub_master->cpumask;
- struct bau_control *smaster = bcp->socket_master;
- struct reset_args reset_args;
-
- reset_args.sender = sender;
- cpumask_clear(mask);
- /* find a single cpu for each uvhub in this distribution mask */
- maskbits = sizeof(struct pnmask) * BITSPERBYTE;
- /* each bit is a pnode relative to the partition base pnode */
- for (pnode = 0; pnode < maskbits; pnode++) {
- int cpu;
- if (!bau_uvhub_isset(pnode, distribution))
- continue;
- apnode = pnode + bcp->partition_base_pnode;
- cpu = pnode_to_first_cpu(apnode, smaster);
- cpumask_set_cpu(cpu, mask);
- }
-
- /* IPI all cpus; preemption is already disabled */
- smp_call_function_many(mask, do_reset, (void *)&reset_args, 1);
- return;
-}
-
-/*
- * Not to be confused with cycles_2_ns() from tsc.c; this gives a relative
- * number, not an absolute. It converts a duration in cycles to a duration in
- * ns.
- */
-static inline unsigned long long cycles_2_ns(unsigned long long cyc)
-{
- struct cyc2ns_data data;
- unsigned long long ns;
-
- cyc2ns_read_begin(&data);
- ns = mul_u64_u32_shr(cyc, data.cyc2ns_mul, data.cyc2ns_shift);
- cyc2ns_read_end();
-
- return ns;
-}
-
-/*
- * The reverse of the above; converts a duration in ns to a duration in cycles.
- */
-static inline unsigned long long ns_2_cycles(unsigned long long ns)
-{
- struct cyc2ns_data data;
- unsigned long long cyc;
-
- cyc2ns_read_begin(&data);
- cyc = (ns << data.cyc2ns_shift) / data.cyc2ns_mul;
- cyc2ns_read_end();
-
- return cyc;
-}
-
-static inline unsigned long cycles_2_us(unsigned long long cyc)
-{
- return cycles_2_ns(cyc) / NSEC_PER_USEC;
-}
-
-static inline cycles_t sec_2_cycles(unsigned long sec)
-{
- return ns_2_cycles(sec * NSEC_PER_SEC);
-}
-
-static inline unsigned long long usec_2_cycles(unsigned long usec)
-{
- return ns_2_cycles(usec * NSEC_PER_USEC);
-}
-
-/*
- * wait for all cpus on this hub to finish their sends and go quiet
- * leaves uvhub_quiesce set so that no new broadcasts are started by
- * bau_flush_send_and_wait()
- */
-static inline void quiesce_local_uvhub(struct bau_control *hmaster)
-{
- atom_asr(1, (struct atomic_short *)&hmaster->uvhub_quiesce);
-}
-
-/*
- * mark this quiet-requestor as done
- */
-static inline void end_uvhub_quiesce(struct bau_control *hmaster)
-{
- atom_asr(-1, (struct atomic_short *)&hmaster->uvhub_quiesce);
-}
-
-/*
- * UV2 could have an extra bit of status in the ACTIVATION_STATUS_2 register.
- * But not currently used.
- */
-static unsigned long uv2_3_read_status(unsigned long offset, int rshft, int desc)
-{
- return ((read_lmmr(offset) >> rshft) & UV_ACT_STATUS_MASK) << 1;
-}
-
-/*
- * Entered when a bau descriptor has gone into a permanent busy wait because
- * of a hardware bug.
- * Workaround the bug.
- */
-static int handle_uv2_busy(struct bau_control *bcp)
-{
- struct ptc_stats *stat = bcp->statp;
-
- stat->s_uv2_wars++;
- bcp->busy = 1;
- return FLUSH_GIVEUP;
-}
-
-static int uv2_3_wait_completion(struct bau_desc *bau_desc,
- struct bau_control *bcp, long try)
-{
- unsigned long descriptor_stat;
- cycles_t ttm;
- u64 mmr_offset = bcp->status_mmr;
- int right_shift = bcp->status_index;
- int desc = bcp->uvhub_cpu;
- long busy_reps = 0;
- struct ptc_stats *stat = bcp->statp;
-
- descriptor_stat = uv2_3_read_status(mmr_offset, right_shift, desc);
-
- /* spin on the status MMR, waiting for it to go idle */
- while (descriptor_stat != UV2H_DESC_IDLE) {
- if (descriptor_stat == UV2H_DESC_SOURCE_TIMEOUT) {
- /*
- * A h/w bug on the destination side may
- * have prevented the message being marked
- * pending, thus it doesn't get replied to
- * and gets continually nacked until it times
- * out with a SOURCE_TIMEOUT.
- */
- stat->s_stimeout++;
- return FLUSH_GIVEUP;
- } else if (descriptor_stat == UV2H_DESC_DEST_TIMEOUT) {
- ttm = get_cycles();
-
- /*
- * Our retries may be blocked by all destination
- * swack resources being consumed, and a timeout
- * pending. In that case hardware returns the
- * ERROR that looks like a destination timeout.
- * Without using the extended status we have to
- * deduce from the short time that this was a
- * strong nack.
- */
- if (cycles_2_us(ttm - bcp->send_message) < timeout_us) {
- bcp->conseccompletes = 0;
- stat->s_plugged++;
- /* FLUSH_RETRY_PLUGGED causes hang on boot */
- return FLUSH_GIVEUP;
- }
- stat->s_dtimeout++;
- bcp->conseccompletes = 0;
- /* FLUSH_RETRY_TIMEOUT causes hang on boot */
- return FLUSH_GIVEUP;
- } else {
- busy_reps++;
- if (busy_reps > 1000000) {
- /* not to hammer on the clock */
- busy_reps = 0;
- ttm = get_cycles();
- if ((ttm - bcp->send_message) > bcp->timeout_interval)
- return handle_uv2_busy(bcp);
- }
- /*
- * descriptor_stat is still BUSY
- */
- cpu_relax();
- }
- descriptor_stat = uv2_3_read_status(mmr_offset, right_shift, desc);
- }
- bcp->conseccompletes++;
- return FLUSH_COMPLETE;
-}
-
-/*
- * Returns the status of current BAU message for cpu desc as a bit field
- * [Error][Busy][Aux]
- */
-static u64 read_status(u64 status_mmr, int index, int desc)
-{
- u64 stat;
-
- stat = ((read_lmmr(status_mmr) >> index) & UV_ACT_STATUS_MASK) << 1;
- stat |= (read_lmmr(UVH_LB_BAU_SB_ACTIVATION_STATUS_2) >> desc) & 0x1;
-
- return stat;
-}
-
-static int uv4_wait_completion(struct bau_desc *bau_desc,
- struct bau_control *bcp, long try)
-{
- struct ptc_stats *stat = bcp->statp;
- u64 descriptor_stat;
- u64 mmr = bcp->status_mmr;
- int index = bcp->status_index;
- int desc = bcp->uvhub_cpu;
-
- descriptor_stat = read_status(mmr, index, desc);
-
- /* spin on the status MMR, waiting for it to go idle */
- while (descriptor_stat != UV2H_DESC_IDLE) {
- switch (descriptor_stat) {
- case UV2H_DESC_SOURCE_TIMEOUT:
- stat->s_stimeout++;
- return FLUSH_GIVEUP;
-
- case UV2H_DESC_DEST_TIMEOUT:
- stat->s_dtimeout++;
- bcp->conseccompletes = 0;
- return FLUSH_RETRY_TIMEOUT;
-
- case UV2H_DESC_DEST_STRONG_NACK:
- stat->s_plugged++;
- bcp->conseccompletes = 0;
- return FLUSH_RETRY_PLUGGED;
-
- case UV2H_DESC_DEST_PUT_ERR:
- bcp->conseccompletes = 0;
- return FLUSH_GIVEUP;
-
- default:
- /* descriptor_stat is still BUSY */
- cpu_relax();
- }
- descriptor_stat = read_status(mmr, index, desc);
- }
- bcp->conseccompletes++;
- return FLUSH_COMPLETE;
-}
-
-/*
- * Our retries are blocked by all destination sw ack resources being
- * in use, and a timeout is pending. In that case hardware immediately
- * returns the ERROR that looks like a destination timeout.
- */
-static void destination_plugged(struct bau_desc *bau_desc,
- struct bau_control *bcp,
- struct bau_control *hmaster, struct ptc_stats *stat)
-{
- udelay(bcp->plugged_delay);
- bcp->plugged_tries++;
-
- if (bcp->plugged_tries >= bcp->plugsb4reset) {
- bcp->plugged_tries = 0;
-
- quiesce_local_uvhub(hmaster);
-
- spin_lock(&hmaster->queue_lock);
- reset_with_ipi(&bau_desc->distribution, bcp);
- spin_unlock(&hmaster->queue_lock);
-
- end_uvhub_quiesce(hmaster);
-
- bcp->ipi_attempts++;
- stat->s_resets_plug++;
- }
-}
-
-static void destination_timeout(struct bau_desc *bau_desc,
- struct bau_control *bcp, struct bau_control *hmaster,
- struct ptc_stats *stat)
-{
- hmaster->max_concurr = 1;
- bcp->timeout_tries++;
- if (bcp->timeout_tries >= bcp->timeoutsb4reset) {
- bcp->timeout_tries = 0;
-
- quiesce_local_uvhub(hmaster);
-
- spin_lock(&hmaster->queue_lock);
- reset_with_ipi(&bau_desc->distribution, bcp);
- spin_unlock(&hmaster->queue_lock);
-
- end_uvhub_quiesce(hmaster);
-
- bcp->ipi_attempts++;
- stat->s_resets_timeout++;
- }
-}
-
-/*
- * Stop all cpus on a uvhub from using the BAU for a period of time.
- * This is reversed by check_enable.
- */
-static void disable_for_period(struct bau_control *bcp, struct ptc_stats *stat)
-{
- int tcpu;
- struct bau_control *tbcp;
- struct bau_control *hmaster;
- cycles_t tm1;
-
- hmaster = bcp->uvhub_master;
- spin_lock(&hmaster->disable_lock);
- if (!bcp->baudisabled) {
- stat->s_bau_disabled++;
- tm1 = get_cycles();
- for_each_present_cpu(tcpu) {
- tbcp = &per_cpu(bau_control, tcpu);
- if (tbcp->uvhub_master == hmaster) {
- tbcp->baudisabled = 1;
- tbcp->set_bau_on_time =
- tm1 + bcp->disabled_period;
- }
- }
- }
- spin_unlock(&hmaster->disable_lock);
-}
-
-static void count_max_concurr(int stat, struct bau_control *bcp,
- struct bau_control *hmaster)
-{
- bcp->plugged_tries = 0;
- bcp->timeout_tries = 0;
- if (stat != FLUSH_COMPLETE)
- return;
- if (bcp->conseccompletes <= bcp->complete_threshold)
- return;
- if (hmaster->max_concurr >= hmaster->max_concurr_const)
- return;
- hmaster->max_concurr++;
-}
-
-static void record_send_stats(cycles_t time1, cycles_t time2,
- struct bau_control *bcp, struct ptc_stats *stat,
- int completion_status, int try)
-{
- cycles_t elapsed;
-
- if (time2 > time1) {
- elapsed = time2 - time1;
- stat->s_time += elapsed;
-
- if ((completion_status == FLUSH_COMPLETE) && (try == 1)) {
- bcp->period_requests++;
- bcp->period_time += elapsed;
- if ((elapsed > usec_2_cycles(bcp->cong_response_us)) &&
- (bcp->period_requests > bcp->cong_reps) &&
- ((bcp->period_time / bcp->period_requests) >
- usec_2_cycles(bcp->cong_response_us))) {
- stat->s_congested++;
- disable_for_period(bcp, stat);
- }
- }
- } else
- stat->s_requestor--;
-
- if (completion_status == FLUSH_COMPLETE && try > 1)
- stat->s_retriesok++;
- else if (completion_status == FLUSH_GIVEUP) {
- stat->s_giveup++;
- if (get_cycles() > bcp->period_end)
- bcp->period_giveups = 0;
- bcp->period_giveups++;
- if (bcp->period_giveups == 1)
- bcp->period_end = get_cycles() + bcp->disabled_period;
- if (bcp->period_giveups > bcp->giveup_limit) {
- disable_for_period(bcp, stat);
- stat->s_giveuplimit++;
- }
- }
-}
-
-/*
- * Handle the completion status of a message send.
- */
-static void handle_cmplt(int completion_status, struct bau_desc *bau_desc,
- struct bau_control *bcp, struct bau_control *hmaster,
- struct ptc_stats *stat)
-{
- if (completion_status == FLUSH_RETRY_PLUGGED)
- destination_plugged(bau_desc, bcp, hmaster, stat);
- else if (completion_status == FLUSH_RETRY_TIMEOUT)
- destination_timeout(bau_desc, bcp, hmaster, stat);
-}
-
-/*
- * Send a broadcast and wait for it to complete.
- *
- * The flush_mask contains the cpus the broadcast is to be sent to including
- * cpus that are on the local uvhub.
- *
- * Returns 0 if all flushing represented in the mask was done.
- * Returns 1 if it gives up entirely and the original cpu mask is to be
- * returned to the kernel.
- */
-static int uv_flush_send_and_wait(struct cpumask *flush_mask,
- struct bau_control *bcp,
- struct bau_desc *bau_desc)
-{
- int seq_number = 0;
- int completion_stat = 0;
- long try = 0;
- unsigned long index;
- cycles_t time1;
- cycles_t time2;
- struct ptc_stats *stat = bcp->statp;
- struct bau_control *hmaster = bcp->uvhub_master;
- struct uv2_3_bau_msg_header *uv2_3_hdr = NULL;
-
- while (hmaster->uvhub_quiesce)
- cpu_relax();
-
- time1 = get_cycles();
- uv2_3_hdr = &bau_desc->header.uv2_3_hdr;
-
- do {
- if (try == 0) {
- uv2_3_hdr->msg_type = MSG_REGULAR;
- seq_number = bcp->message_number++;
- } else {
- uv2_3_hdr->msg_type = MSG_RETRY;
- stat->s_retry_messages++;
- }
-
- uv2_3_hdr->sequence = seq_number;
- index = (1UL << AS_PUSH_SHIFT) | bcp->uvhub_cpu;
- bcp->send_message = get_cycles();
-
- write_mmr_activation(index);
-
- try++;
- completion_stat = ops.wait_completion(bau_desc, bcp, try);
-
- handle_cmplt(completion_stat, bau_desc, bcp, hmaster, stat);
-
- if (bcp->ipi_attempts >= bcp->ipi_reset_limit) {
- bcp->ipi_attempts = 0;
- stat->s_overipilimit++;
- completion_stat = FLUSH_GIVEUP;
- break;
- }
- cpu_relax();
- } while ((completion_stat == FLUSH_RETRY_PLUGGED) ||
- (completion_stat == FLUSH_RETRY_TIMEOUT));
-
- time2 = get_cycles();
-
- count_max_concurr(completion_stat, bcp, hmaster);
-
- while (hmaster->uvhub_quiesce)
- cpu_relax();
-
- atomic_dec(&hmaster->active_descriptor_count);
-
- record_send_stats(time1, time2, bcp, stat, completion_stat, try);
-
- if (completion_stat == FLUSH_GIVEUP)
- /* FLUSH_GIVEUP will fall back to using IPI's for tlb flush */
- return 1;
- return 0;
-}
-
-/*
- * The BAU is disabled for this uvhub. When the disabled time period has
- * expired re-enable it.
- * Return 0 if it is re-enabled for all cpus on this uvhub.
- */
-static int check_enable(struct bau_control *bcp, struct ptc_stats *stat)
-{
- int tcpu;
- struct bau_control *tbcp;
- struct bau_control *hmaster;
-
- hmaster = bcp->uvhub_master;
- spin_lock(&hmaster->disable_lock);
- if (bcp->baudisabled && (get_cycles() >= bcp->set_bau_on_time)) {
- stat->s_bau_reenabled++;
- for_each_present_cpu(tcpu) {
- tbcp = &per_cpu(bau_control, tcpu);
- if (tbcp->uvhub_master == hmaster) {
- tbcp->baudisabled = 0;
- tbcp->period_requests = 0;
- tbcp->period_time = 0;
- tbcp->period_giveups = 0;
- }
- }
- spin_unlock(&hmaster->disable_lock);
- return 0;
- }
- spin_unlock(&hmaster->disable_lock);
- return -1;
-}
-
-static void record_send_statistics(struct ptc_stats *stat, int locals, int hubs,
- int remotes, struct bau_desc *bau_desc)
-{
- stat->s_requestor++;
- stat->s_ntargcpu += remotes + locals;
- stat->s_ntargremotes += remotes;
- stat->s_ntarglocals += locals;
-
- /* uvhub statistics */
- hubs = bau_uvhub_weight(&bau_desc->distribution);
- if (locals) {
- stat->s_ntarglocaluvhub++;
- stat->s_ntargremoteuvhub += (hubs - 1);
- } else
- stat->s_ntargremoteuvhub += hubs;
-
- stat->s_ntarguvhub += hubs;
-
- if (hubs >= 16)
- stat->s_ntarguvhub16++;
- else if (hubs >= 8)
- stat->s_ntarguvhub8++;
- else if (hubs >= 4)
- stat->s_ntarguvhub4++;
- else if (hubs >= 2)
- stat->s_ntarguvhub2++;
- else
- stat->s_ntarguvhub1++;
-}
-
-/*
- * Translate a cpu mask to the uvhub distribution mask in the BAU
- * activation descriptor.
- */
-static int set_distrib_bits(struct cpumask *flush_mask, struct bau_control *bcp,
- struct bau_desc *bau_desc, int *localsp, int *remotesp)
-{
- int cpu;
- int pnode;
- int cnt = 0;
- struct hub_and_pnode *hpp;
-
- for_each_cpu(cpu, flush_mask) {
- /*
- * The distribution vector is a bit map of pnodes, relative
- * to the partition base pnode (and the partition base nasid
- * in the header).
- * Translate cpu to pnode and hub using a local memory array.
- */
- hpp = &bcp->socket_master->thp[cpu];
- pnode = hpp->pnode - bcp->partition_base_pnode;
- bau_uvhub_set(pnode, &bau_desc->distribution);
- cnt++;
- if (hpp->uvhub == bcp->uvhub)
- (*localsp)++;
- else
- (*remotesp)++;
- }
- if (!cnt)
- return 1;
- return 0;
-}
-
-/*
- * globally purge translation cache of a virtual address or all TLB's
- * @cpumask: mask of all cpu's in which the address is to be removed
- * @mm: mm_struct containing virtual address range
- * @start: start virtual address to be removed from TLB
- * @end: end virtual address to be remove from TLB
- * @cpu: the current cpu
- *
- * This is the entry point for initiating any UV global TLB shootdown.
- *
- * Purges the translation caches of all specified processors of the given
- * virtual address, or purges all TLB's on specified processors.
- *
- * The caller has derived the cpumask from the mm_struct. This function
- * is called only if there are bits set in the mask. (e.g. flush_tlb_page())
- *
- * The cpumask is converted into a uvhubmask of the uvhubs containing
- * those cpus.
- *
- * Note that this function should be called with preemption disabled.
- *
- * Returns NULL if all remote flushing was done.
- * Returns pointer to cpumask if some remote flushing remains to be
- * done. The returned pointer is valid till preemption is re-enabled.
- */
-const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
- const struct flush_tlb_info *info)
-{
- unsigned int cpu = smp_processor_id();
- int locals = 0, remotes = 0, hubs = 0;
- struct bau_desc *bau_desc;
- struct cpumask *flush_mask;
- struct ptc_stats *stat;
- struct bau_control *bcp;
- unsigned long descriptor_status, status, address;
-
- bcp = &per_cpu(bau_control, cpu);
-
- if (bcp->nobau)
- return cpumask;
-
- stat = bcp->statp;
- stat->s_enters++;
-
- if (bcp->busy) {
- descriptor_status =
- read_lmmr(UVH_LB_BAU_SB_ACTIVATION_STATUS_0);
- status = ((descriptor_status >> (bcp->uvhub_cpu *
- UV_ACT_STATUS_SIZE)) & UV_ACT_STATUS_MASK) << 1;
- if (status == UV2H_DESC_BUSY)
- return cpumask;
- bcp->busy = 0;
- }
-
- /* bau was disabled due to slow response */
- if (bcp->baudisabled) {
- if (check_enable(bcp, stat)) {
- stat->s_ipifordisabled++;
- return cpumask;
- }
- }
-
- /*
- * Each sending cpu has a per-cpu mask which it fills from the caller's
- * cpu mask. All cpus are converted to uvhubs and copied to the
- * activation descriptor.
- */
- flush_mask = (struct cpumask *)per_cpu(uv_flush_tlb_mask, cpu);
- /* don't actually do a shootdown of the local cpu */
- cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu));
-
- if (cpumask_test_cpu(cpu, cpumask))
- stat->s_ntargself++;
-
- bau_desc = bcp->descriptor_base;
- bau_desc += (ITEMS_PER_DESC * bcp->uvhub_cpu);
- bau_uvhubs_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE);
- if (set_distrib_bits(flush_mask, bcp, bau_desc, &locals, &remotes))
- return NULL;
-
- record_send_statistics(stat, locals, hubs, remotes, bau_desc);
-
- if (!info->end || (info->end - info->start) <= PAGE_SIZE)
- address = info->start;
- else
- address = TLB_FLUSH_ALL;
-
- switch (bcp->uvhub_version) {
- case UV_BAU_V2:
- case UV_BAU_V3:
- bau_desc->payload.uv2_3.address = address;
- bau_desc->payload.uv2_3.sending_cpu = cpu;
- break;
- case UV_BAU_V4:
- bau_desc->payload.uv4.address = address;
- bau_desc->payload.uv4.sending_cpu = cpu;
- bau_desc->payload.uv4.qualifier = BAU_DESC_QUALIFIER;
- break;
- }
-
- /*
- * uv_flush_send_and_wait returns 0 if all cpu's were messaged,
- * or 1 if it gave up and the original cpumask should be returned.
- */
- if (!uv_flush_send_and_wait(flush_mask, bcp, bau_desc))
- return NULL;
- else
- return cpumask;
-}
-
-/*
- * Search the message queue for any 'other' unprocessed message with the
- * same software acknowledge resource bit vector as the 'msg' message.
- */
-static struct bau_pq_entry *find_another_by_swack(struct bau_pq_entry *msg,
- struct bau_control *bcp)
-{
- struct bau_pq_entry *msg_next = msg + 1;
- unsigned char swack_vec = msg->swack_vec;
-
- if (msg_next > bcp->queue_last)
- msg_next = bcp->queue_first;
- while (msg_next != msg) {
- if ((msg_next->canceled == 0) && (msg_next->replied_to == 0) &&
- (msg_next->swack_vec == swack_vec))
- return msg_next;
- msg_next++;
- if (msg_next > bcp->queue_last)
- msg_next = bcp->queue_first;
- }
- return NULL;
-}
-
-/*
- * UV2 needs to work around a bug in which an arriving message has not
- * set a bit in the UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE register.
- * Such a message must be ignored.
- */
-static void process_uv2_message(struct msg_desc *mdp, struct bau_control *bcp)
-{
- unsigned long mmr_image;
- unsigned char swack_vec;
- struct bau_pq_entry *msg = mdp->msg;
- struct bau_pq_entry *other_msg;
-
- mmr_image = ops.read_l_sw_ack();
- swack_vec = msg->swack_vec;
-
- if ((swack_vec & mmr_image) == 0) {
- /*
- * This message was assigned a swack resource, but no
- * reserved acknowlegment is pending.
- * The bug has prevented this message from setting the MMR.
- */
- /*
- * Some message has set the MMR 'pending' bit; it might have
- * been another message. Look for that message.
- */
- other_msg = find_another_by_swack(msg, bcp);
- if (other_msg) {
- /*
- * There is another. Process this one but do not
- * ack it.
- */
- bau_process_message(mdp, bcp, 0);
- /*
- * Let the natural processing of that other message
- * acknowledge it. Don't get the processing of sw_ack's
- * out of order.
- */
- return;
- }
- }
-
- /*
- * Either the MMR shows this one pending a reply or there is no
- * other message using this sw_ack, so it is safe to acknowledge it.
- */
- bau_process_message(mdp, bcp, 1);
-
- return;
-}
-
-/*
- * The BAU message interrupt comes here. (registered by set_intr_gate)
- * See entry_64.S
- *
- * We received a broadcast assist message.
- *
- * Interrupts are disabled; this interrupt could represent
- * the receipt of several messages.
- *
- * All cores/threads on this hub get this interrupt.
- * The last one to see it does the software ack.
- * (the resource will not be freed until noninterruptable cpus see this
- * interrupt; hardware may timeout the s/w ack and reply ERROR)
- */
-DEFINE_IDTENTRY_SYSVEC(sysvec_uv_bau_message)
-{
- int count = 0;
- cycles_t time_start;
- struct bau_pq_entry *msg;
- struct bau_control *bcp;
- struct ptc_stats *stat;
- struct msg_desc msgdesc;
-
- ack_APIC_irq();
- kvm_set_cpu_l1tf_flush_l1d();
- time_start = get_cycles();
-
- bcp = &per_cpu(bau_control, smp_processor_id());
- stat = bcp->statp;
-
- msgdesc.queue_first = bcp->queue_first;
- msgdesc.queue_last = bcp->queue_last;
-
- msg = bcp->bau_msg_head;
- while (msg->swack_vec) {
- count++;
-
- msgdesc.msg_slot = msg - msgdesc.queue_first;
- msgdesc.msg = msg;
- if (bcp->uvhub_version == UV_BAU_V2)
- process_uv2_message(&msgdesc, bcp);
- else
- /* no error workaround for uv3 */
- bau_process_message(&msgdesc, bcp, 1);
-
- msg++;
- if (msg > msgdesc.queue_last)
- msg = msgdesc.queue_first;
- bcp->bau_msg_head = msg;
- }
- stat->d_time += (get_cycles() - time_start);
- if (!count)
- stat->d_nomsg++;
- else if (count > 1)
- stat->d_multmsg++;
-}
-
-/*
- * Each target uvhub (i.e. a uvhub that has cpu's) needs to have
- * shootdown message timeouts enabled. The timeout does not cause
- * an interrupt, but causes an error message to be returned to
- * the sender.
- */
-static void __init enable_timeouts(void)
-{
- int uvhub;
- int nuvhubs;
- int pnode;
- unsigned long mmr_image;
-
- nuvhubs = uv_num_possible_blades();
-
- for (uvhub = 0; uvhub < nuvhubs; uvhub++) {
- if (!uv_blade_nr_possible_cpus(uvhub))
- continue;
-
- pnode = uv_blade_to_pnode(uvhub);
- mmr_image = read_mmr_misc_control(pnode);
- /*
- * Set the timeout period and then lock it in, in three
- * steps; captures and locks in the period.
- *
- * To program the period, the SOFT_ACK_MODE must be off.
- */
- mmr_image &= ~(1L << SOFTACK_MSHIFT);
- write_mmr_misc_control(pnode, mmr_image);
- /*
- * Set the 4-bit period.
- */
- mmr_image &= ~((unsigned long)0xf << SOFTACK_PSHIFT);
- mmr_image |= (SOFTACK_TIMEOUT_PERIOD << SOFTACK_PSHIFT);
- write_mmr_misc_control(pnode, mmr_image);
-
- mmr_image |= (1L << SOFTACK_MSHIFT);
- if (is_uv2_hub()) {
- /* do not touch the legacy mode bit */
- /* hw bug workaround; do not use extended status */
- mmr_image &= ~(1L << UV2_EXT_SHFT);
- } else if (is_uv3_hub()) {
- mmr_image &= ~(1L << PREFETCH_HINT_SHFT);
- mmr_image |= (1L << SB_STATUS_SHFT);
- }
- write_mmr_misc_control(pnode, mmr_image);
- }
-}
-
-static void *ptc_seq_start(struct seq_file *file, loff_t *offset)
-{
- if (*offset < num_possible_cpus())
- return offset;
- return NULL;
-}
-
-static void *ptc_seq_next(struct seq_file *file, void *data, loff_t *offset)
-{
- (*offset)++;
- if (*offset < num_possible_cpus())
- return offset;
- return NULL;
-}
-
-static void ptc_seq_stop(struct seq_file *file, void *data)
-{
-}
-
-/*
- * Display the statistics thru /proc/sgi_uv/ptc_statistics
- * 'data' points to the cpu number
- * Note: see the descriptions in stat_description[].
- */
-static int ptc_seq_show(struct seq_file *file, void *data)
-{
- struct ptc_stats *stat;
- struct bau_control *bcp;
- int cpu;
-
- cpu = *(loff_t *)data;
- if (!cpu) {
- seq_puts(file,
- "# cpu bauoff sent stime self locals remotes ncpus localhub ");
- seq_puts(file, "remotehub numuvhubs numuvhubs16 numuvhubs8 ");
- seq_puts(file,
- "numuvhubs4 numuvhubs2 numuvhubs1 dto snacks retries ");
- seq_puts(file,
- "rok resetp resett giveup sto bz throt disable ");
- seq_puts(file,
- "enable wars warshw warwaits enters ipidis plugged ");
- seq_puts(file,
- "ipiover glim cong swack recv rtime all one mult ");
- seq_puts(file, "none retry canc nocan reset rcan\n");
- }
- if (cpu < num_possible_cpus() && cpu_online(cpu)) {
- bcp = &per_cpu(bau_control, cpu);
- if (bcp->nobau) {
- seq_printf(file, "cpu %d bau disabled\n", cpu);
- return 0;
- }
- stat = bcp->statp;
- /* source side statistics */
- seq_printf(file,
- "cpu %d %d %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld ",
- cpu, bcp->nobau, stat->s_requestor,
- cycles_2_us(stat->s_time),
- stat->s_ntargself, stat->s_ntarglocals,
- stat->s_ntargremotes, stat->s_ntargcpu,
- stat->s_ntarglocaluvhub, stat->s_ntargremoteuvhub,
- stat->s_ntarguvhub, stat->s_ntarguvhub16);
- seq_printf(file, "%ld %ld %ld %ld %ld %ld ",
- stat->s_ntarguvhub8, stat->s_ntarguvhub4,
- stat->s_ntarguvhub2, stat->s_ntarguvhub1,
- stat->s_dtimeout, stat->s_strongnacks);
- seq_printf(file, "%ld %ld %ld %ld %ld %ld %ld %ld ",
- stat->s_retry_messages, stat->s_retriesok,
- stat->s_resets_plug, stat->s_resets_timeout,
- stat->s_giveup, stat->s_stimeout,
- stat->s_busy, stat->s_throttles);
- seq_printf(file, "%ld %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld ",
- stat->s_bau_disabled, stat->s_bau_reenabled,
- stat->s_uv2_wars, stat->s_uv2_wars_hw,
- stat->s_uv2_war_waits, stat->s_enters,
- stat->s_ipifordisabled, stat->s_plugged,
- stat->s_overipilimit, stat->s_giveuplimit,
- stat->s_congested);
-
- /* destination side statistics */
- seq_printf(file,
- "%lx %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld\n",
- ops.read_g_sw_ack(uv_cpu_to_pnode(cpu)),
- stat->d_requestee, cycles_2_us(stat->d_time),
- stat->d_alltlb, stat->d_onetlb, stat->d_multmsg,
- stat->d_nomsg, stat->d_retries, stat->d_canceled,
- stat->d_nocanceled, stat->d_resets,
- stat->d_rcanceled);
- }
- return 0;
-}
-
-/*
- * Display the tunables thru debugfs
- */
-static ssize_t tunables_read(struct file *file, char __user *userbuf,
- size_t count, loff_t *ppos)
-{
- char *buf;
- int ret;
-
- buf = kasprintf(GFP_KERNEL, "%s %s %s\n%d %d %d %d %d %d %d %d %d %d\n",
- "max_concur plugged_delay plugsb4reset timeoutsb4reset",
- "ipi_reset_limit complete_threshold congested_response_us",
- "congested_reps disabled_period giveup_limit",
- max_concurr, plugged_delay, plugsb4reset,
- timeoutsb4reset, ipi_reset_limit, complete_threshold,
- congested_respns_us, congested_reps, disabled_period,
- giveup_limit);
-
- if (!buf)
- return -ENOMEM;
-
- ret = simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
- kfree(buf);
- return ret;
-}
-
-/*
- * handle a write to /proc/sgi_uv/ptc_statistics
- * -1: reset the statistics
- * 0: display meaning of the statistics
- */
-static ssize_t ptc_proc_write(struct file *file, const char __user *user,
- size_t count, loff_t *data)
-{
- int cpu;
- int i;
- int elements;
- long input_arg;
- char optstr[64];
- struct ptc_stats *stat;
-
- if (count == 0 || count > sizeof(optstr))
- return -EINVAL;
- if (copy_from_user(optstr, user, count))
- return -EFAULT;
- optstr[count - 1] = '\0';
-
- if (!strcmp(optstr, "on")) {
- set_bau_on();
- return count;
- } else if (!strcmp(optstr, "off")) {
- set_bau_off();
- return count;
- }
-
- if (kstrtol(optstr, 10, &input_arg) < 0) {
- pr_debug("%s is invalid\n", optstr);
- return -EINVAL;
- }
-
- if (input_arg == 0) {
- elements = ARRAY_SIZE(stat_description);
- pr_debug("# cpu: cpu number\n");
- pr_debug("Sender statistics:\n");
- for (i = 0; i < elements; i++)
- pr_debug("%s\n", stat_description[i]);
- } else if (input_arg == -1) {
- for_each_present_cpu(cpu) {
- stat = &per_cpu(ptcstats, cpu);
- memset(stat, 0, sizeof(struct ptc_stats));
- }
- }
-
- return count;
-}
-
-static int local_atoi(const char *name)
-{
- int val = 0;
-
- for (;; name++) {
- switch (*name) {
- case '0' ... '9':
- val = 10*val+(*name-'0');
- break;
- default:
- return val;
- }
- }
-}
-
-/*
- * Parse the values written to /sys/kernel/debug/sgi_uv/bau_tunables.
- * Zero values reset them to defaults.
- */
-static int parse_tunables_write(struct bau_control *bcp, char *instr,
- int count)
-{
- char *p;
- char *q;
- int cnt = 0;
- int val;
- int e = ARRAY_SIZE(tunables);
-
- p = instr + strspn(instr, WHITESPACE);
- q = p;
- for (; *p; p = q + strspn(q, WHITESPACE)) {
- q = p + strcspn(p, WHITESPACE);
- cnt++;
- if (q == p)
- break;
- }
- if (cnt != e) {
- pr_info("bau tunable error: should be %d values\n", e);
- return -EINVAL;
- }
-
- p = instr + strspn(instr, WHITESPACE);
- q = p;
- for (cnt = 0; *p; p = q + strspn(q, WHITESPACE), cnt++) {
- q = p + strcspn(p, WHITESPACE);
- val = local_atoi(p);
- switch (cnt) {
- case 0:
- if (val == 0) {
- max_concurr = MAX_BAU_CONCURRENT;
- max_concurr_const = MAX_BAU_CONCURRENT;
- continue;
- }
- if (val < 1 || val > bcp->cpus_in_uvhub) {
- pr_debug(
- "Error: BAU max concurrent %d is invalid\n",
- val);
- return -EINVAL;
- }
- max_concurr = val;
- max_concurr_const = val;
- continue;
- default:
- if (val == 0)
- *tunables[cnt].tunp = tunables[cnt].deflt;
- else
- *tunables[cnt].tunp = val;
- continue;
- }
- }
- return 0;
-}
-
-/*
- * Handle a write to debugfs. (/sys/kernel/debug/sgi_uv/bau_tunables)
- */
-static ssize_t tunables_write(struct file *file, const char __user *user,
- size_t count, loff_t *data)
-{
- int cpu;
- int ret;
- char instr[100];
- struct bau_control *bcp;
-
- if (count == 0 || count > sizeof(instr)-1)
- return -EINVAL;
- if (copy_from_user(instr, user, count))
- return -EFAULT;
-
- instr[count] = '\0';
-
- cpu = get_cpu();
- bcp = &per_cpu(bau_control, cpu);
- ret = parse_tunables_write(bcp, instr, count);
- put_cpu();
- if (ret)
- return ret;
-
- for_each_present_cpu(cpu) {
- bcp = &per_cpu(bau_control, cpu);
- bcp->max_concurr = max_concurr;
- bcp->max_concurr_const = max_concurr;
- bcp->plugged_delay = plugged_delay;
- bcp->plugsb4reset = plugsb4reset;
- bcp->timeoutsb4reset = timeoutsb4reset;
- bcp->ipi_reset_limit = ipi_reset_limit;
- bcp->complete_threshold = complete_threshold;
- bcp->cong_response_us = congested_respns_us;
- bcp->cong_reps = congested_reps;
- bcp->disabled_period = sec_2_cycles(disabled_period);
- bcp->giveup_limit = giveup_limit;
- }
- return count;
-}
-
-static const struct seq_operations uv_ptc_seq_ops = {
- .start = ptc_seq_start,
- .next = ptc_seq_next,
- .stop = ptc_seq_stop,
- .show = ptc_seq_show
-};
-
-static int ptc_proc_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &uv_ptc_seq_ops);
-}
-
-static int tunables_open(struct inode *inode, struct file *file)
-{
- return 0;
-}
-
-static const struct proc_ops uv_ptc_proc_ops = {
- .proc_open = ptc_proc_open,
- .proc_read = seq_read,
- .proc_write = ptc_proc_write,
- .proc_lseek = seq_lseek,
- .proc_release = seq_release,
-};
-
-static const struct file_operations tunables_fops = {
- .open = tunables_open,
- .read = tunables_read,
- .write = tunables_write,
- .llseek = default_llseek,
-};
-
-static int __init uv_ptc_init(void)
-{
- struct proc_dir_entry *proc_uv_ptc;
-
- if (!is_uv_system())
- return 0;
-
- proc_uv_ptc = proc_create(UV_PTC_BASENAME, 0444, NULL,
- &uv_ptc_proc_ops);
- if (!proc_uv_ptc) {
- pr_err("unable to create %s proc entry\n",
- UV_PTC_BASENAME);
- return -EINVAL;
- }
-
- tunables_dir = debugfs_create_dir(UV_BAU_TUNABLES_DIR, NULL);
- debugfs_create_file(UV_BAU_TUNABLES_FILE, 0600, tunables_dir, NULL,
- &tunables_fops);
- return 0;
-}
-
-/*
- * Initialize the sending side's sending buffers.
- */
-static void activation_descriptor_init(int node, int pnode, int base_pnode)
-{
- int i;
- int cpu;
- unsigned long gpa;
- unsigned long m;
- unsigned long n;
- size_t dsize;
- struct bau_desc *bau_desc;
- struct bau_desc *bd2;
- struct uv2_3_bau_msg_header *uv2_3_hdr;
- struct bau_control *bcp;
-
- /*
- * each bau_desc is 64 bytes; there are 8 (ITEMS_PER_DESC)
- * per cpu; and one per cpu on the uvhub (ADP_SZ)
- */
- dsize = sizeof(struct bau_desc) * ADP_SZ * ITEMS_PER_DESC;
- bau_desc = kmalloc_node(dsize, GFP_KERNEL, node);
- BUG_ON(!bau_desc);
-
- gpa = uv_gpa(bau_desc);
- n = uv_gpa_to_gnode(gpa);
- m = ops.bau_gpa_to_offset(gpa);
-
- /* the 14-bit pnode */
- write_mmr_descriptor_base(pnode,
- (n << UVH_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_SHFT | m));
- /*
- * Initializing all 8 (ITEMS_PER_DESC) descriptors for each
- * cpu even though we only use the first one; one descriptor can
- * describe a broadcast to 256 uv hubs.
- */
- for (i = 0, bd2 = bau_desc; i < (ADP_SZ * ITEMS_PER_DESC); i++, bd2++) {
- memset(bd2, 0, sizeof(struct bau_desc));
- /*
- * BIOS uses legacy mode, but uv2 and uv3 hardware always
- * uses native mode for selective broadcasts.
- */
- uv2_3_hdr = &bd2->header.uv2_3_hdr;
- uv2_3_hdr->swack_flag = 1;
- uv2_3_hdr->base_dest_nasid = UV_PNODE_TO_NASID(base_pnode);
- uv2_3_hdr->dest_subnodeid = UV_LB_SUBNODEID;
- uv2_3_hdr->command = UV_NET_ENDPOINT_INTD;
- }
- for_each_present_cpu(cpu) {
- if (pnode != uv_blade_to_pnode(uv_cpu_to_blade_id(cpu)))
- continue;
- bcp = &per_cpu(bau_control, cpu);
- bcp->descriptor_base = bau_desc;
- }
-}
-
-/*
- * initialize the destination side's receiving buffers
- * entered for each uvhub in the partition
- * - node is first node (kernel memory notion) on the uvhub
- * - pnode is the uvhub's physical identifier
- */
-static void pq_init(int node, int pnode)
-{
- int cpu;
- size_t plsize;
- char *cp;
- void *vp;
- unsigned long gnode, first, last, tail;
- struct bau_pq_entry *pqp;
- struct bau_control *bcp;
-
- plsize = (DEST_Q_SIZE + 1) * sizeof(struct bau_pq_entry);
- vp = kmalloc_node(plsize, GFP_KERNEL, node);
- BUG_ON(!vp);
-
- pqp = (struct bau_pq_entry *)vp;
- cp = (char *)pqp + 31;
- pqp = (struct bau_pq_entry *)(((unsigned long)cp >> 5) << 5);
-
- for_each_present_cpu(cpu) {
- if (pnode != uv_cpu_to_pnode(cpu))
- continue;
- /* for every cpu on this pnode: */
- bcp = &per_cpu(bau_control, cpu);
- bcp->queue_first = pqp;
- bcp->bau_msg_head = pqp;
- bcp->queue_last = pqp + (DEST_Q_SIZE - 1);
- }
-
- first = ops.bau_gpa_to_offset(uv_gpa(pqp));
- last = ops.bau_gpa_to_offset(uv_gpa(pqp + (DEST_Q_SIZE - 1)));
-
- /*
- * Pre UV4, the gnode is required to locate the payload queue
- * and the payload queue tail must be maintained by the kernel.
- */
- bcp = &per_cpu(bau_control, smp_processor_id());
- if (bcp->uvhub_version <= UV_BAU_V3) {
- tail = first;
- gnode = uv_gpa_to_gnode(uv_gpa(pqp));
- first = (gnode << UV_PAYLOADQ_GNODE_SHIFT) | tail;
- write_mmr_payload_tail(pnode, tail);
- }
-
- ops.write_payload_first(pnode, first);
- ops.write_payload_last(pnode, last);
-
- /* in effect, all msg_type's are set to MSG_NOOP */
- memset(pqp, 0, sizeof(struct bau_pq_entry) * DEST_Q_SIZE);
-}
-
-/*
- * Initialization of each UV hub's structures
- */
-static void __init init_uvhub(int uvhub, int vector, int base_pnode)
-{
- int node;
- int pnode;
- unsigned long apicid;
-
- node = uvhub_to_first_node(uvhub);
- pnode = uv_blade_to_pnode(uvhub);
-
- activation_descriptor_init(node, pnode, base_pnode);
-
- pq_init(node, pnode);
- /*
- * The below initialization can't be in firmware because the
- * messaging IRQ will be determined by the OS.
- */
- apicid = uvhub_to_first_apicid(uvhub);
- write_mmr_data_config(pnode, ((apicid << 32) | vector));
-}
-
-/*
- * We will set BAU_MISC_CONTROL with a timeout period.
- * But the BIOS has set UVH_AGING_PRESCALE_SEL and UVH_TRANSACTION_TIMEOUT.
- * So the destination timeout period has to be calculated from them.
- */
-static int calculate_destination_timeout(void)
-{
- unsigned long mmr_image;
- int mult1;
- int base;
- int ret;
-
- /* same destination timeout for uv2 and uv3 */
- /* 4 bits 0/1 for 10/80us base, 3 bits of multiplier */
- mmr_image = uv_read_local_mmr(UVH_LB_BAU_MISC_CONTROL);
- mmr_image = (mmr_image & UV_SA_MASK) >> UV_SA_SHFT;
- if (mmr_image & (1L << UV2_ACK_UNITS_SHFT))
- base = 80;
- else
- base = 10;
- mult1 = mmr_image & UV2_ACK_MASK;
- ret = mult1 * base;
-
- return ret;
-}
-
-static void __init init_per_cpu_tunables(void)
-{
- int cpu;
- struct bau_control *bcp;
-
- for_each_present_cpu(cpu) {
- bcp = &per_cpu(bau_control, cpu);
- bcp->baudisabled = 0;
- if (nobau)
- bcp->nobau = true;
- bcp->statp = &per_cpu(ptcstats, cpu);
- /* time interval to catch a hardware stay-busy bug */
- bcp->timeout_interval = usec_2_cycles(2*timeout_us);
- bcp->max_concurr = max_concurr;
- bcp->max_concurr_const = max_concurr;
- bcp->plugged_delay = plugged_delay;
- bcp->plugsb4reset = plugsb4reset;
- bcp->timeoutsb4reset = timeoutsb4reset;
- bcp->ipi_reset_limit = ipi_reset_limit;
- bcp->complete_threshold = complete_threshold;
- bcp->cong_response_us = congested_respns_us;
- bcp->cong_reps = congested_reps;
- bcp->disabled_period = sec_2_cycles(disabled_period);
- bcp->giveup_limit = giveup_limit;
- spin_lock_init(&bcp->queue_lock);
- spin_lock_init(&bcp->uvhub_lock);
- spin_lock_init(&bcp->disable_lock);
- }
-}
-
-/*
- * Scan all cpus to collect blade and socket summaries.
- */
-static int __init get_cpu_topology(int base_pnode,
- struct uvhub_desc *uvhub_descs,
- unsigned char *uvhub_mask)
-{
- int cpu;
- int pnode;
- int uvhub;
- int socket;
- struct bau_control *bcp;
- struct uvhub_desc *bdp;
- struct socket_desc *sdp;
-
- for_each_present_cpu(cpu) {
- bcp = &per_cpu(bau_control, cpu);
-
- memset(bcp, 0, sizeof(struct bau_control));
-
- pnode = uv_cpu_hub_info(cpu)->pnode;
- if ((pnode - base_pnode) >= UV_DISTRIBUTION_SIZE) {
- pr_emerg(
- "cpu %d pnode %d-%d beyond %d; BAU disabled\n",
- cpu, pnode, base_pnode, UV_DISTRIBUTION_SIZE);
- return 1;
- }
-
- bcp->osnode = cpu_to_node(cpu);
- bcp->partition_base_pnode = base_pnode;
-
- uvhub = uv_cpu_hub_info(cpu)->numa_blade_id;
- *(uvhub_mask + (uvhub/8)) |= (1 << (uvhub%8));
- bdp = &uvhub_descs[uvhub];
-
- bdp->num_cpus++;
- bdp->uvhub = uvhub;
- bdp->pnode = pnode;
-
- /* kludge: 'assuming' one node per socket, and assuming that
- disabling a socket just leaves a gap in node numbers */
- socket = bcp->osnode & 1;
- bdp->socket_mask |= (1 << socket);
- sdp = &bdp->socket[socket];
- sdp->cpu_number[sdp->num_cpus] = cpu;
- sdp->num_cpus++;
- if (sdp->num_cpus > MAX_CPUS_PER_SOCKET) {
- pr_emerg("%d cpus per socket invalid\n",
- sdp->num_cpus);
- return 1;
- }
- }
- return 0;
-}
-
-/*
- * Each socket is to get a local array of pnodes/hubs.
- */
-static void make_per_cpu_thp(struct bau_control *smaster)
-{
- int cpu;
- size_t hpsz = sizeof(struct hub_and_pnode) * num_possible_cpus();
-
- smaster->thp = kzalloc_node(hpsz, GFP_KERNEL, smaster->osnode);
- for_each_present_cpu(cpu) {
- smaster->thp[cpu].pnode = uv_cpu_hub_info(cpu)->pnode;
- smaster->thp[cpu].uvhub = uv_cpu_hub_info(cpu)->numa_blade_id;
- }
-}
-
-/*
- * Each uvhub is to get a local cpumask.
- */
-static void make_per_hub_cpumask(struct bau_control *hmaster)
-{
- int sz = sizeof(cpumask_t);
-
- hmaster->cpumask = kzalloc_node(sz, GFP_KERNEL, hmaster->osnode);
-}
-
-/*
- * Initialize all the per_cpu information for the cpu's on a given socket,
- * given what has been gathered into the socket_desc struct.
- * And reports the chosen hub and socket masters back to the caller.
- */
-static int scan_sock(struct socket_desc *sdp, struct uvhub_desc *bdp,
- struct bau_control **smasterp,
- struct bau_control **hmasterp)
-{
- int i, cpu, uvhub_cpu;
- struct bau_control *bcp;
-
- for (i = 0; i < sdp->num_cpus; i++) {
- cpu = sdp->cpu_number[i];
- bcp = &per_cpu(bau_control, cpu);
- bcp->cpu = cpu;
- if (i == 0) {
- *smasterp = bcp;
- if (!(*hmasterp))
- *hmasterp = bcp;
- }
- bcp->cpus_in_uvhub = bdp->num_cpus;
- bcp->cpus_in_socket = sdp->num_cpus;
- bcp->socket_master = *smasterp;
- bcp->uvhub = bdp->uvhub;
- if (is_uv2_hub())
- bcp->uvhub_version = UV_BAU_V2;
- else if (is_uv3_hub())
- bcp->uvhub_version = UV_BAU_V3;
- else if (is_uv4_hub())
- bcp->uvhub_version = UV_BAU_V4;
- else {
- pr_emerg("uvhub version not 1, 2, 3, or 4\n");
- return 1;
- }
- bcp->uvhub_master = *hmasterp;
- uvhub_cpu = uv_cpu_blade_processor_id(cpu);
- bcp->uvhub_cpu = uvhub_cpu;
-
- /*
- * The ERROR and BUSY status registers are located pairwise over
- * the STATUS_0 and STATUS_1 mmrs; each an array[32] of 2 bits.
- */
- if (uvhub_cpu < UV_CPUS_PER_AS) {
- bcp->status_mmr = UVH_LB_BAU_SB_ACTIVATION_STATUS_0;
- bcp->status_index = uvhub_cpu * UV_ACT_STATUS_SIZE;
- } else {
- bcp->status_mmr = UVH_LB_BAU_SB_ACTIVATION_STATUS_1;
- bcp->status_index = (uvhub_cpu - UV_CPUS_PER_AS)
- * UV_ACT_STATUS_SIZE;
- }
-
- if (bcp->uvhub_cpu >= MAX_CPUS_PER_UVHUB) {
- pr_emerg("%d cpus per uvhub invalid\n",
- bcp->uvhub_cpu);
- return 1;
- }
- }
- return 0;
-}
-
-/*
- * Summarize the blade and socket topology into the per_cpu structures.
- */
-static int __init summarize_uvhub_sockets(int nuvhubs,
- struct uvhub_desc *uvhub_descs,
- unsigned char *uvhub_mask)
-{
- int socket;
- int uvhub;
- unsigned short socket_mask;
-
- for (uvhub = 0; uvhub < nuvhubs; uvhub++) {
- struct uvhub_desc *bdp;
- struct bau_control *smaster = NULL;
- struct bau_control *hmaster = NULL;
-
- if (!(*(uvhub_mask + (uvhub/8)) & (1 << (uvhub%8))))
- continue;
-
- bdp = &uvhub_descs[uvhub];
- socket_mask = bdp->socket_mask;
- socket = 0;
- while (socket_mask) {
- struct socket_desc *sdp;
- if ((socket_mask & 1)) {
- sdp = &bdp->socket[socket];
- if (scan_sock(sdp, bdp, &smaster, &hmaster))
- return 1;
- make_per_cpu_thp(smaster);
- }
- socket++;
- socket_mask = (socket_mask >> 1);
- }
- make_per_hub_cpumask(hmaster);
- }
- return 0;
-}
-
-/*
- * initialize the bau_control structure for each cpu
- */
-static int __init init_per_cpu(int nuvhubs, int base_part_pnode)
-{
- struct uvhub_desc *uvhub_descs;
- unsigned char *uvhub_mask = NULL;
-
- if (is_uv3_hub() || is_uv2_hub())
- timeout_us = calculate_destination_timeout();
-
- uvhub_descs = kcalloc(nuvhubs, sizeof(struct uvhub_desc), GFP_KERNEL);
- if (!uvhub_descs)
- goto fail;
-
- uvhub_mask = kzalloc((nuvhubs+7)/8, GFP_KERNEL);
- if (!uvhub_mask)
- goto fail;
-
- if (get_cpu_topology(base_part_pnode, uvhub_descs, uvhub_mask))
- goto fail;
-
- if (summarize_uvhub_sockets(nuvhubs, uvhub_descs, uvhub_mask))
- goto fail;
-
- kfree(uvhub_descs);
- kfree(uvhub_mask);
- init_per_cpu_tunables();
- return 0;
-
-fail:
- kfree(uvhub_descs);
- kfree(uvhub_mask);
- return 1;
-}
-
-static const struct bau_operations uv2_3_bau_ops __initconst = {
- .bau_gpa_to_offset = uv_gpa_to_offset,
- .read_l_sw_ack = read_mmr_sw_ack,
- .read_g_sw_ack = read_gmmr_sw_ack,
- .write_l_sw_ack = write_mmr_sw_ack,
- .write_g_sw_ack = write_gmmr_sw_ack,
- .write_payload_first = write_mmr_payload_first,
- .write_payload_last = write_mmr_payload_last,
- .wait_completion = uv2_3_wait_completion,
-};
-
-static const struct bau_operations uv4_bau_ops __initconst = {
- .bau_gpa_to_offset = uv_gpa_to_soc_phys_ram,
- .read_l_sw_ack = read_mmr_proc_sw_ack,
- .read_g_sw_ack = read_gmmr_proc_sw_ack,
- .write_l_sw_ack = write_mmr_proc_sw_ack,
- .write_g_sw_ack = write_gmmr_proc_sw_ack,
- .write_payload_first = write_mmr_proc_payload_first,
- .write_payload_last = write_mmr_proc_payload_last,
- .wait_completion = uv4_wait_completion,
-};
-
-/*
- * Initialization of BAU-related structures
- */
-static int __init uv_bau_init(void)
-{
- int uvhub;
- int pnode;
- int nuvhubs;
- int cur_cpu;
- int cpus;
- int vector;
- cpumask_var_t *mask;
-
- if (!is_uv_system())
- return 0;
-
- if (is_uv4_hub())
- ops = uv4_bau_ops;
- else if (is_uv3_hub())
- ops = uv2_3_bau_ops;
- else if (is_uv2_hub())
- ops = uv2_3_bau_ops;
-
- nuvhubs = uv_num_possible_blades();
- if (nuvhubs < 2) {
- pr_crit("UV: BAU disabled - insufficient hub count\n");
- goto err_bau_disable;
- }
-
- for_each_possible_cpu(cur_cpu) {
- mask = &per_cpu(uv_flush_tlb_mask, cur_cpu);
- zalloc_cpumask_var_node(mask, GFP_KERNEL, cpu_to_node(cur_cpu));
- }
-
- uv_base_pnode = 0x7fffffff;
- for (uvhub = 0; uvhub < nuvhubs; uvhub++) {
- cpus = uv_blade_nr_possible_cpus(uvhub);
- if (cpus && (uv_blade_to_pnode(uvhub) < uv_base_pnode))
- uv_base_pnode = uv_blade_to_pnode(uvhub);
- }
-
- /* software timeouts are not supported on UV4 */
- if (is_uv3_hub() || is_uv2_hub())
- enable_timeouts();
-
- if (init_per_cpu(nuvhubs, uv_base_pnode)) {
- pr_crit("UV: BAU disabled - per CPU init failed\n");
- goto err_bau_disable;
- }
-
- vector = UV_BAU_MESSAGE;
- for_each_possible_blade(uvhub) {
- if (uv_blade_nr_possible_cpus(uvhub))
- init_uvhub(uvhub, vector, uv_base_pnode);
- }
-
- for_each_possible_blade(uvhub) {
- if (uv_blade_nr_possible_cpus(uvhub)) {
- unsigned long val;
- unsigned long mmr;
- pnode = uv_blade_to_pnode(uvhub);
- /* INIT the bau */
- val = 1L << 63;
- write_gmmr_activation(pnode, val);
- mmr = 1; /* should be 1 to broadcast to both sockets */
- write_mmr_data_broadcast(pnode, mmr);
- }
- }
-
- return 0;
-
-err_bau_disable:
-
- for_each_possible_cpu(cur_cpu)
- free_cpumask_var(per_cpu(uv_flush_tlb_mask, cur_cpu));
-
- set_bau_off();
- nobau_perm = 1;
-
- return -EINVAL;
-}
-core_initcall(uv_bau_init);
-fs_initcall(uv_ptc_init);
Powered by blists - more mailing lists