Message-ID: <20201008225737.mfhgrqi73fozqdfz@earth.universe>
Date:   Fri, 9 Oct 2020 00:57:37 +0200
From:   Sebastian Reichel <sre@...nel.org>
To:     Dmitry Osipenko <digetx@...il.com>
Cc:     Lee Jones <lee.jones@...aro.org>, Rob Herring <robh+dt@...nel.org>,
        Thierry Reding <thierry.reding@...il.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        Pavel Machek <pavel@....cz>, Dan Murphy <dmurphy@...com>,
        Lubomir Rintel <lkundrak@...sk>, devicetree@...r.kernel.org,
        linux-tegra@...r.kernel.org, linux-leds@...r.kernel.org,
        linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 3/5] power: supply: Add battery gauge driver for Acer
 Iconia Tab A500

Hi,

On Sun, Sep 06, 2020 at 10:51:01PM +0300, Dmitry Osipenko wrote:
> This patch adds battery gauge driver for Acer Iconia Tab A500 device.
> The battery gauge function is provided via the Embedded Controller,
> which is found on the Acer A500.
> 
> Signed-off-by: Dmitry Osipenko <digetx@...il.com>
> ---

Reviewed-by: Sebastian Reichel <sebastian.reichel@...labora.com>

-- Sebastian

>  drivers/power/supply/Kconfig             |   6 +
>  drivers/power/supply/Makefile            |   1 +
>  drivers/power/supply/acer_a500_battery.c | 297 +++++++++++++++++++++++
>  3 files changed, 304 insertions(+)
>  create mode 100644 drivers/power/supply/acer_a500_battery.c
> 
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index a4657484f38b..21257a81b55b 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -760,4 +760,10 @@ config RN5T618_POWER
>  	  This driver can also be built as a module. If so, the module will be
>  	  called rn5t618_power.
>  
> +config BATTERY_ACER_A500
> +	tristate "Acer Iconia Tab A500 battery driver"
> +	depends on MFD_ACER_A500_EC
> +	help
> +	  Say Y to include support for Acer Iconia Tab A500 battery fuel gauge.
> +
>  endif # POWER_SUPPLY
> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> index 293d4a5d80d3..d0f1b77c5c49 100644
> --- a/drivers/power/supply/Makefile
> +++ b/drivers/power/supply/Makefile
> @@ -97,3 +97,4 @@ obj-$(CONFIG_CHARGER_BD70528)	+= bd70528-charger.o
>  obj-$(CONFIG_CHARGER_BD99954)	+= bd99954-charger.o
>  obj-$(CONFIG_CHARGER_WILCO)	+= wilco-charger.o
>  obj-$(CONFIG_RN5T618_POWER)	+= rn5t618_power.o
> +obj-$(CONFIG_BATTERY_ACER_A500)	+= acer_a500_battery.o
> diff --git a/drivers/power/supply/acer_a500_battery.c b/drivers/power/supply/acer_a500_battery.c
> new file mode 100644
> index 000000000000..93135933c8af
> --- /dev/null
> +++ b/drivers/power/supply/acer_a500_battery.c
> @@ -0,0 +1,297 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Battery driver for Acer Iconia Tab A500.
> + *
> + * Copyright 2020 GRATE-driver project.
> + *
> + * Based on downstream driver from Acer Inc.
> + * Based on NVIDIA Gas Gauge driver for SBS Compliant Batteries.
> + *
> + * Copyright (c) 2010, NVIDIA Corporation.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/power_supply.h>
> +#include <linux/regmap.h>
> +#include <linux/sched.h>
> +#include <linux/slab.h>
> +#include <linux/workqueue.h>
> +
> +enum {
> +	REG_CAPACITY,
> +	REG_VOLTAGE,
> +	REG_CURRENT,
> +	REG_DESIGN_CAPACITY,
> +	REG_TEMPERATURE,
> +};
> +
> +#define EC_DATA(_reg, _psp) {			\
> +	.psp = POWER_SUPPLY_PROP_ ## _psp,	\
> +	.reg = _reg,				\
> +}
> +
> +static const struct battery_register {
> +	enum power_supply_property psp;
> +	unsigned int reg;
> +} ec_data[] = {
> +	[REG_CAPACITY]		= EC_DATA(0x00, CAPACITY),
> +	[REG_VOLTAGE]		= EC_DATA(0x01, VOLTAGE_NOW),
> +	[REG_CURRENT]		= EC_DATA(0x03, CURRENT_NOW),
> +	[REG_DESIGN_CAPACITY]	= EC_DATA(0x08, CHARGE_FULL_DESIGN),
> +	[REG_TEMPERATURE]	= EC_DATA(0x0a, TEMP),
> +};
> +
> +static const enum power_supply_property a500_battery_properties[] = {
> +	POWER_SUPPLY_PROP_CAPACITY,
> +	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
> +	POWER_SUPPLY_PROP_CURRENT_NOW,
> +	POWER_SUPPLY_PROP_PRESENT,
> +	POWER_SUPPLY_PROP_STATUS,
> +	POWER_SUPPLY_PROP_TECHNOLOGY,
> +	POWER_SUPPLY_PROP_TEMP,
> +	POWER_SUPPLY_PROP_VOLTAGE_NOW,
> +};
> +
> +struct a500_battery {
> +	struct delayed_work poll_work;
> +	struct power_supply *psy;
> +	struct regmap *rmap;
> +	unsigned int capacity;
> +};
> +
> +static bool a500_battery_update_capacity(struct a500_battery *bat)
> +{
> +	unsigned int capacity;
> +	int err;
> +
> +	err = regmap_read(bat->rmap, ec_data[REG_CAPACITY].reg, &capacity);
> +	if (err)
> +		return false;
> +
> +	/* capacity can be >100% even if max value is 100% */
> +	capacity = min(capacity, 100u);
> +
> +	if (bat->capacity != capacity) {
> +		bat->capacity = capacity;
> +		return true;
> +	}
> +
> +	return false;
> +}
> +
> +static int a500_battery_get_status(struct a500_battery *bat)
> +{
> +	if (bat->capacity < 100) {
> +		if (power_supply_am_i_supplied(bat->psy))
> +			return POWER_SUPPLY_STATUS_CHARGING;
> +		else
> +			return POWER_SUPPLY_STATUS_DISCHARGING;
> +	}
> +
> +	return POWER_SUPPLY_STATUS_FULL;
> +}
> +
> +static void a500_battery_unit_adjustment(struct device *dev,
> +					 enum power_supply_property psp,
> +					 union power_supply_propval *val)
> +{
> +	const unsigned int base_unit_conversion = 1000;
> +	const unsigned int temp_kelvin_to_celsius = 2731;
> +
> +	switch (psp) {
> +	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
> +	case POWER_SUPPLY_PROP_CURRENT_NOW:
> +	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> +		val->intval *= base_unit_conversion;
> +		break;
> +
> +	case POWER_SUPPLY_PROP_TEMP:
> +		val->intval -= temp_kelvin_to_celsius;
> +		break;
> +
> +	case POWER_SUPPLY_PROP_PRESENT:
> +		val->intval = !!val->intval;
> +		break;
> +
> +	default:
> +		dev_dbg(dev,
> +			"%s: no need for unit conversion %d\n", __func__, psp);
> +	}
> +}
> +
> +static int a500_battery_get_ec_data_index(struct device *dev,
> +					  enum power_supply_property psp)
> +{
> +	unsigned int i;
> +
> +	/*
> +	 * DESIGN_CAPACITY register always returns a non-zero value if
> +	 * battery is connected and zero if disconnected, hence we'll use
> +	 * it for judging the battery presence.
> +	 */
> +	if (psp == POWER_SUPPLY_PROP_PRESENT)
> +		psp = POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN;
> +
> +	for (i = 0; i < ARRAY_SIZE(ec_data); i++)
> +		if (psp == ec_data[i].psp)
> +			return i;
> +
> +	dev_dbg(dev, "%s: invalid property %u\n", __func__, psp);
> +
> +	return -EINVAL;
> +}
> +
> +static int a500_battery_get_property(struct power_supply *psy,
> +				     enum power_supply_property psp,
> +				     union power_supply_propval *val)
> +{
> +	struct a500_battery *bat = power_supply_get_drvdata(psy);
> +	struct device *dev = psy->dev.parent;
> +	int ret = 0;
> +
> +	switch (psp) {
> +	case POWER_SUPPLY_PROP_STATUS:
> +		val->intval = a500_battery_get_status(bat);
> +		break;
> +
> +	case POWER_SUPPLY_PROP_TECHNOLOGY:
> +		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
> +		break;
> +
> +	case POWER_SUPPLY_PROP_CAPACITY:
> +		a500_battery_update_capacity(bat);
> +		val->intval = bat->capacity;
> +		break;
> +
> +	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
> +	case POWER_SUPPLY_PROP_CURRENT_NOW:
> +	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> +	case POWER_SUPPLY_PROP_PRESENT:
> +	case POWER_SUPPLY_PROP_TEMP:
> +		ret = a500_battery_get_ec_data_index(dev, psp);
> +		if (ret < 0)
> +			break;
> +
> +		ret = regmap_read(bat->rmap, ec_data[ret].reg, &val->intval);
> +		break;
> +
> +	default:
> +		dev_err(dev, "%s: invalid property %u\n", __func__, psp);
> +		return -EINVAL;
> +	}
> +
> +	if (!ret) {
> +		/* convert units to match requirements of power supply class */
> +		a500_battery_unit_adjustment(dev, psp, val);
> +	}
> +
> +	dev_dbg(dev, "%s: property = %d, value = %x\n",
> +		__func__, psp, val->intval);
> +
> +	/* return NODATA for properties if battery not presents */
> +	if (ret)
> +		return -ENODATA;
> +
> +	return 0;
> +}
> +
> +static void a500_battery_poll_work(struct work_struct *work)
> +{
> +	struct a500_battery *bat;
> +	bool capacity_changed;
> +
> +	bat = container_of(work, struct a500_battery, poll_work.work);
> +	capacity_changed = a500_battery_update_capacity(bat);
> +
> +	if (capacity_changed)
> +		power_supply_changed(bat->psy);
> +
> +	/* continuously send uevent notification */
> +	schedule_delayed_work(&bat->poll_work, 30 * HZ);
> +}
> +
> +static const struct power_supply_desc a500_battery_desc = {
> +	.name = "ec-battery",
> +	.type = POWER_SUPPLY_TYPE_BATTERY,
> +	.properties = a500_battery_properties,
> +	.get_property = a500_battery_get_property,
> +	.num_properties = ARRAY_SIZE(a500_battery_properties),
> +	.external_power_changed = power_supply_changed,
> +};
> +
> +static int a500_battery_probe(struct platform_device *pdev)
> +{
> +	struct power_supply_config psy_cfg = {};
> +	struct a500_battery *bat;
> +
> +	bat = devm_kzalloc(&pdev->dev, sizeof(*bat), GFP_KERNEL);
> +	if (!bat)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, bat);
> +
> +	psy_cfg.of_node = pdev->dev.parent->of_node;
> +	psy_cfg.drv_data = bat;
> +
> +	bat->rmap = dev_get_regmap(pdev->dev.parent, "KB930");
> +	if (!bat->rmap)
> +		return -EINVAL;
> +
> +	bat->psy = devm_power_supply_register_no_ws(&pdev->dev,
> +						    &a500_battery_desc,
> +						    &psy_cfg);
> +	if (IS_ERR(bat->psy))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(bat->psy),
> +				     "failed to register battery\n");
> +
> +	INIT_DELAYED_WORK(&bat->poll_work, a500_battery_poll_work);
> +	schedule_delayed_work(&bat->poll_work, HZ);
> +
> +	return 0;
> +}
> +
> +static int a500_battery_remove(struct platform_device *pdev)
> +{
> +	struct a500_battery *bat = dev_get_drvdata(&pdev->dev);
> +
> +	cancel_delayed_work_sync(&bat->poll_work);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused a500_battery_suspend(struct device *dev)
> +{
> +	struct a500_battery *bat = dev_get_drvdata(dev);
> +
> +	cancel_delayed_work_sync(&bat->poll_work);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused a500_battery_resume(struct device *dev)
> +{
> +	struct a500_battery *bat = dev_get_drvdata(dev);
> +
> +	schedule_delayed_work(&bat->poll_work, HZ);
> +
> +	return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(a500_battery_pm_ops,
> +			 a500_battery_suspend, a500_battery_resume);
> +
> +static struct platform_driver a500_battery_driver = {
> +	.driver = {
> +		.name = "acer-a500-iconia-battery",
> +		.pm = &a500_battery_pm_ops,
> +	},
> +	.probe = a500_battery_probe,
> +	.remove = a500_battery_remove,
> +};
> +module_platform_driver(a500_battery_driver);
> +
> +MODULE_DESCRIPTION("Battery gauge driver for Acer Iconia Tab A500");
> +MODULE_AUTHOR("Dmitry Osipenko <digetx@...il.com>");
> +MODULE_ALIAS("platform:acer-a500-iconia-battery");
> +MODULE_LICENSE("GPL");
> -- 
> 2.27.0
> 

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)

Powered by blists - more mailing lists