[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20201008162238.5083-1-dmurphy@ti.com>
Date: Thu, 8 Oct 2020 11:22:36 -0500
From: Dan Murphy <dmurphy@...com>
To: <davem@...emloft.net>, <andrew@...n.ch>, <f.fainelli@...il.com>,
<hkallweit1@...il.com>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Dan Murphy <dmurphy@...com>
Subject: [PATCH net-next 0/2] DP83TD510 Single Pair 10Mbps Ethernet PHY
Hello
The DP83TD510 is an Ethernet PHY supporting single pair of twisted wires. The
PHY is capable of 10Mbps communication over long distances and exceeds the
IEEE 802.3cg 10BASE-T1L single-pair Ethernet specification. The PHY supports
various voltage level signalling and can be forced to support a specific
voltage or allowed to perfrom auto negotiation on the voltage level. The
default for the PHY is auto negotiation but if the PHY is forced to a specific
voltage then the LP must also support the same voltage.
Dan
Dan Murphy (2):
dt-bindings: dp83td510: Add binding for DP83TD510 Ethernet PHY
net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY
.../devicetree/bindings/net/ti,dp83td510.yaml | 70 +++
drivers/net/phy/Kconfig | 6 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/dp83td510.c | 583 ++++++++++++++++++
4 files changed, 660 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/ti,dp83td510.yaml
create mode 100644 drivers/net/phy/dp83td510.c
--
2.28.0.585.ge1cfff676549
Powered by blists - more mailing lists