| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <8e2e3709f4a0143c99e0f7c8c7a36ac6615b348e.camel@nvidia.com>
Date: Fri, 9 Oct 2020 21:59:21 +0000
From: Nikolay Aleksandrov <nikolay@...dia.com>
To: "bridge@...ts.linux-foundation.org"
<bridge@...ts.linux-foundation.org>,
"henrik.bjoernlund@...rochip.com" <henrik.bjoernlund@...rochip.com>,
"davem@...emloft.net" <davem@...emloft.net>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"jiri@...lanox.com" <jiri@...lanox.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
Roopa Prabhu <roopa@...dia.com>,
"idosch@...lanox.com" <idosch@...lanox.com>,
"kuba@...nel.org" <kuba@...nel.org>,
"UNGLinuxDriver@...rochip.com" <UNGLinuxDriver@...rochip.com>
CC: "horatiu.vultur@...rochip.com" <horatiu.vultur@...rochip.com>
Subject: Re: [PATCH net-next v4 08/10] bridge: cfm: Netlink GET configuration
Interface.
On Sat, 2020-10-10 at 00:56 +0300, Nikolay Aleksandrov wrote:
> On Fri, 2020-10-09 at 14:35 +0000, Henrik Bjoernlund wrote:
> > This is the implementation of CFM netlink configuration
> > get information interface.
> >
> > Add new nested netlink attributes. These attributes are used by the
> > user space to get configuration information.
> >
> > GETLINK:
> > Request filter RTEXT_FILTER_CFM_CONFIG:
> > Indicating that CFM configuration information must be delivered.
> >
> > IFLA_BRIDGE_CFM:
> > Points to the CFM information.
> >
> > IFLA_BRIDGE_CFM_MEP_CREATE_INFO:
> > This indicate that MEP instance create parameters are following.
> > IFLA_BRIDGE_CFM_MEP_CONFIG_INFO:
> > This indicate that MEP instance config parameters are following.
> > IFLA_BRIDGE_CFM_CC_CONFIG_INFO:
> > This indicate that MEP instance CC functionality
> > parameters are following.
> > IFLA_BRIDGE_CFM_CC_RDI_INFO:
> > This indicate that CC transmitted CCM PDU RDI
> > parameters are following.
> > IFLA_BRIDGE_CFM_CC_CCM_TX_INFO:
> > This indicate that CC transmitted CCM PDU parameters are
> > following.
> > IFLA_BRIDGE_CFM_CC_PEER_MEP_INFO:
> > This indicate that the added peer MEP IDs are following.
> >
> > CFM nested attribute has the following attributes in next level.
> >
> > GETLINK RTEXT_FILTER_CFM_CONFIG:
> > IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE:
> > The created MEP instance number.
> > The type is u32.
> > IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN:
> > The created MEP domain.
> > The type is u32 (br_cfm_domain).
> > It must be BR_CFM_PORT.
> > This means that CFM frames are transmitted and received
> > directly on the port - untagged. Not in a VLAN.
> > IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION:
> > The created MEP direction.
> > The type is u32 (br_cfm_mep_direction).
> > It must be BR_CFM_MEP_DIRECTION_DOWN.
> > This means that CFM frames are transmitted and received on
> > the port. Not in the bridge.
> > IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX:
> > The created MEP residence port ifindex.
> > The type is u32 (ifindex).
> >
> > IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE:
> > The deleted MEP instance number.
> > The type is u32.
> >
> > IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE:
> > The configured MEP instance number.
> > The type is u32.
> > IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC:
> > The configured MEP unicast MAC address.
> > The type is 6*u8 (array).
> > This is used as SMAC in all transmitted CFM frames.
> > IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL:
> > The configured MEP unicast MD level.
> > The type is u32.
> > It must be in the range 1-7.
> > No CFM frames are passing through this MEP on lower levels.
> > IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID:
> > The configured MEP ID.
> > The type is u32.
> > It must be in the range 0-0x1FFF.
> > This MEP ID is inserted in any transmitted CCM frame.
> >
> > IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE:
> > The configured MEP instance number.
> > The type is u32.
> > IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE:
> > The Continuity Check (CC) functionality is enabled or disabled.
> > The type is u32 (bool).
> > IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL:
> > The CC expected receive interval of CCM frames.
> > The type is u32 (br_cfm_ccm_interval).
> > This is also the transmission interval of CCM frames when enabled.
> > IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID:
> > The CC expected receive MAID in CCM frames.
> > The type is CFM_MAID_LENGTH*u8.
> > This is MAID is also inserted in transmitted CCM frames.
> >
> > IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE:
> > The configured MEP instance number.
> > The type is u32.
> > IFLA_BRIDGE_CFM_CC_PEER_MEPID:
> > The CC Peer MEP ID added.
> > The type is u32.
> > When a Peer MEP ID is added and CC is enabled it is expected to
> > receive CCM frames from that Peer MEP.
> >
> > IFLA_BRIDGE_CFM_CC_RDI_INSTANCE:
> > The configured MEP instance number.
> > The type is u32.
> > IFLA_BRIDGE_CFM_CC_RDI_RDI:
> > The RDI that is inserted in transmitted CCM PDU.
> > The type is u32 (bool).
> >
> > IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE:
> > The configured MEP instance number.
> > The type is u32.
> > IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC:
> > The transmitted CCM frame destination MAC address.
> > The type is 6*u8 (array).
> > This is used as DMAC in all transmitted CFM frames.
> > IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE:
> > The transmitted CCM frame update (increment) of sequence
> > number is enabled or disabled.
> > The type is u32 (bool).
> > IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD:
> > The period of time where CCM frame are transmitted.
> > The type is u32.
> > The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX
> > must be done before timeout to keep transmission alive.
> > When period is zero any ongoing CCM frame transmission
> > will be stopped.
> > IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV:
> > The transmitted CCM frame update with Interface Status TLV
> > is enabled or disabled.
> > The type is u32 (bool).
> > IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE:
> > The transmitted Interface Status TLV value field.
> > The type is u8.
> > IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV:
> > The transmitted CCM frame update with Port Status TLV is enabled
> > or disabled.
> > The type is u32 (bool).
> > IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE:
> > The transmitted Port Status TLV value field.
> > The type is u8.
> >
> > Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@...rochip.com>
> > Reviewed-by: Horatiu Vultur <horatiu.vultur@...rochip.com>
> > ---
> > include/uapi/linux/if_bridge.h | 6 ++
> > net/bridge/br_cfm_netlink.c | 161 +++++++++++++++++++++++++++++++++
> > net/bridge/br_netlink.c | 29 +++++-
> > net/bridge/br_private.h | 6 ++
> > 4 files changed, 200 insertions(+), 2 deletions(-)
> >
>
> Acked-by: Nikolay Aleksandrov <nikolay@...dia.com>
>
I missed this until now, but the local variables need to
be arranged in reverse xmas tree (longest to shortest) in
br_cfm_config_fill_info().
Powered by blists - more mailing lists