| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201009095621.833192-1-laurent@vivier.eu>
Date: Fri, 9 Oct 2020 11:56:21 +0200
From: Laurent Vivier <laurent@...ier.eu>
To: linux-kernel@...r.kernel.org
Cc: Geert Uytterhoeven <geert@...ux-m68k.org>,
Roman Zippel <zippel@...ux-m68k.org>,
linux-m68k@...ts.linux-m68k.org, Philip Blundell <philb@....org>,
Joshua Thompson <funaho@...ai.org>,
Finn Thain <fthain@...egraphics.com.au>,
Sam Creasey <sammy@...my.net>,
Laurent Vivier <laurent@...ier.eu>
Subject: [PATCH] m68k: remove unused mach_max_dma_address
This information is unused since the discontinuous memory support
has been introduced in 2007.
Fixes: 12d810c1b8c2 ("m68k: discontinuous memory support")
Signed-off-by: Laurent Vivier <laurent@...ier.eu>
---
arch/m68k/amiga/config.c | 8 --------
arch/m68k/apollo/config.c | 1 -
arch/m68k/atari/config.c | 1 -
arch/m68k/bvme6000/config.c | 1 -
arch/m68k/hp300/config.c | 1 -
arch/m68k/include/asm/machdep.h | 1 -
arch/m68k/kernel/setup_mm.c | 1 -
arch/m68k/mac/config.c | 1 -
arch/m68k/mvme147/config.c | 1 -
arch/m68k/mvme16x/config.c | 1 -
arch/m68k/q40/config.c | 5 -----
arch/m68k/sun3x/config.c | 2 --
12 files changed, 24 deletions(-)
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 8f23b2fab64c..15aea6267ebe 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -385,14 +385,6 @@ void __init config_amiga(void)
mach_init_IRQ = amiga_init_IRQ;
mach_get_model = amiga_get_model;
mach_get_hardware_list = amiga_get_hardware_list;
-
- /*
- * default MAX_DMA=0xffffffff on all machines. If we don't do so, the SCSI
- * code will not be able to allocate any mem for transfers, unless we are
- * dealing with a Z2 mem only system. /Jes
- */
- mach_max_dma_address = 0xffffffff;
-
mach_reset = amiga_reset;
#if IS_ENABLED(CONFIG_INPUT_M68K_BEEP)
mach_beep = amiga_mksound;
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 762da5d7a415..2ebe5b6d229b 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -150,7 +150,6 @@ void __init config_apollo(void)
mach_sched_init=dn_sched_init; /* */
mach_init_IRQ=dn_init_IRQ;
- mach_max_dma_address = 0xffffffff;
mach_hwclk = dn_dummy_hwclk; /* */
mach_reset = dn_dummy_reset; /* */
#ifdef CONFIG_HEARTBEAT
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 7ec3161e8517..43b4e764a1ac 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -205,7 +205,6 @@ void __init config_atari(void)
mach_get_model = atari_get_model;
mach_get_hardware_list = atari_get_hardware_list;
mach_reset = atari_reset;
- mach_max_dma_address = 0xffffff;
#if IS_ENABLED(CONFIG_INPUT_M68K_BEEP)
mach_beep = atari_mksound;
#endif
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index 50f4d01363df..8afaa73ec802 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -101,7 +101,6 @@ void __init config_bvme6000(void)
bvme6000_set_vectors();
#endif
- mach_max_dma_address = 0xffffffff;
mach_sched_init = bvme6000_sched_init;
mach_init_IRQ = bvme6000_init_IRQ;
mach_hwclk = bvme6000_hwclk;
diff --git a/arch/m68k/hp300/config.c b/arch/m68k/hp300/config.c
index a161d44fd20b..ce1eb3d3d55d 100644
--- a/arch/m68k/hp300/config.c
+++ b/arch/m68k/hp300/config.c
@@ -260,7 +260,6 @@ void __init config_hp300(void)
#ifdef CONFIG_HEARTBEAT
mach_heartbeat = hp300_pulse;
#endif
- mach_max_dma_address = 0xffffffff;
if (hp300_model >= HP_330 && hp300_model <= HP_433S &&
hp300_model != HP_350) {
diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h
index 49bd3266b4b1..e564101790ab 100644
--- a/arch/m68k/include/asm/machdep.h
+++ b/arch/m68k/include/asm/machdep.h
@@ -27,7 +27,6 @@ extern void (*mach_halt)( void );
extern void (*mach_power_off)( void );
extern unsigned long (*mach_hd_init) (unsigned long, unsigned long);
extern void (*mach_hd_setup)(char *, int *);
-extern long mach_max_dma_address;
extern void (*mach_heartbeat) (int);
extern void (*mach_l2_flush) (int);
extern void (*mach_beep) (unsigned int, unsigned int);
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index ab8aa7be260f..ade96b1ad946 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -99,7 +99,6 @@ EXPORT_SYMBOL(mach_set_rtc_pll);
void (*mach_reset)( void );
void (*mach_halt)( void );
void (*mach_power_off)( void );
-long mach_max_dma_address = 0x00ffffff; /* default set to the lower 16MB */
#ifdef CONFIG_HEARTBEAT
void (*mach_heartbeat) (int);
EXPORT_SYMBOL(mach_heartbeat);
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index a621fcc1a576..beaade4a0e13 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -140,7 +140,6 @@ void __init config_mac(void)
mach_reset = mac_reset;
mach_halt = mac_poweroff;
mach_power_off = mac_poweroff;
- mach_max_dma_address = 0xffffffff;
#if IS_ENABLED(CONFIG_INPUT_M68K_BEEP)
mach_beep = mac_mksound;
#endif
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index 490700aa2212..ead0e51ecd42 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -80,7 +80,6 @@ void __init mvme147_init_IRQ(void)
void __init config_mvme147(void)
{
- mach_max_dma_address = 0x01000000;
mach_sched_init = mvme147_sched_init;
mach_init_IRQ = mvme147_init_IRQ;
mach_hwclk = mvme147_hwclk;
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index 5b86d10e0f84..79896c331d55 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -268,7 +268,6 @@ void __init config_mvme16x(void)
char id[40];
uint16_t brdno = be16_to_cpu(p->brdno);
- mach_max_dma_address = 0xffffffff;
mach_sched_init = mvme16x_sched_init;
mach_init_IRQ = mvme16x_init_IRQ;
mach_hwclk = mvme16x_hwclk;
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 4627de3c0603..58566262127d 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -185,11 +185,6 @@ void __init config_q40(void)
/* disable a few things that SMSQ might have left enabled */
q40_disable_irqs();
-
- /* no DMA at all, but ide-scsi requires it.. make sure
- * all physical RAM fits into the boundary - otherwise
- * allocator may play costly and useless tricks */
- mach_max_dma_address = 1024*1024*1024;
}
diff --git a/arch/m68k/sun3x/config.c b/arch/m68k/sun3x/config.c
index d806dee71a9c..37121a0f1253 100644
--- a/arch/m68k/sun3x/config.c
+++ b/arch/m68k/sun3x/config.c
@@ -44,8 +44,6 @@ void __init config_sun3x(void)
sun3x_prom_init();
- mach_max_dma_address = 0xffffffff; /* we can DMA anywhere, whee */
-
mach_sched_init = sun3x_sched_init;
mach_init_IRQ = sun3_init_IRQ;
--
2.26.2
Powered by blists - more mailing lists