linux-kernel - Re: [PATCH] net: stmmac: Don't call

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <8036d473-68bd-7ee7-e2e9-677ff4060bd3@gmail.com>
Date:   Fri, 9 Oct 2020 16:54:06 +0200
From:   Heiner Kallweit <hkallweit1@...il.com>
To:     John Keeping <john@...anate.com>, netdev@...r.kernel.org
Cc:     Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...com>,
        Jose Abreu <joabreu@...opsys.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        linux-stm32@...md-mailman.stormreply.com,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] net: stmmac: Don't call _irqoff() with hardirqs enabled

On 08.10.2020 18:27, John Keeping wrote:
> With threadirqs, stmmac_interrupt() is called on a thread with hardirqs
> enabled so we cannot call __napi_schedule_irqoff().  Under lockdep it
> leads to:
> 
> 	------------[ cut here ]------------
> 	WARNING: CPU: 0 PID: 285 at kernel/softirq.c:598 __raise_softirq_irqoff+0x6c/0x1c8
> 	IRQs not disabled as expected
> 	Modules linked in: brcmfmac hci_uart btbcm cfg80211 brcmutil
> 	CPU: 0 PID: 285 Comm: irq/41-eth0 Not tainted 5.4.69-rt39 #1
> 	Hardware name: Rockchip (Device Tree)
> 	[<c0110d3c>] (unwind_backtrace) from [<c010c284>] (show_stack+0x10/0x14)
> 	[<c010c284>] (show_stack) from [<c0855504>] (dump_stack+0xa8/0xe0)
> 	[<c0855504>] (dump_stack) from [<c0120a9c>] (__warn+0xe0/0xfc)
> 	[<c0120a9c>] (__warn) from [<c0120e80>] (warn_slowpath_fmt+0x7c/0xa4)
> 	[<c0120e80>] (warn_slowpath_fmt) from [<c01278c8>] (__raise_softirq_irqoff+0x6c/0x1c8)
> 	[<c01278c8>] (__raise_softirq_irqoff) from [<c056bccc>] (stmmac_interrupt+0x388/0x4e0)
> 	[<c056bccc>] (stmmac_interrupt) from [<c0178714>] (irq_forced_thread_fn+0x28/0x64)
> 	[<c0178714>] (irq_forced_thread_fn) from [<c0178924>] (irq_thread+0x124/0x260)
> 	[<c0178924>] (irq_thread) from [<c0142ee8>] (kthread+0x154/0x164)
> 	[<c0142ee8>] (kthread) from [<c01010bc>] (ret_from_fork+0x14/0x38)
> 	Exception stack(0xeb7b5fb0 to 0xeb7b5ff8)
> 	5fa0:                                     00000000 00000000 00000000 00000000
> 	5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> 	5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> 	irq event stamp: 48
> 	hardirqs last  enabled at (50): [<c085c200>] prb_unlock+0x7c/0x8c
> 	hardirqs last disabled at (51): [<c085c0dc>] prb_lock+0x58/0x100
> 	softirqs last  enabled at (0): [<c011e770>] copy_process+0x550/0x1654
> 	softirqs last disabled at (25): [<c01786ec>] irq_forced_thread_fn+0x0/0x64
> 	---[ end trace 0000000000000002 ]---
> 
> Use __napi_schedule() instead which will save & restore the interrupt
> state.
> 
I'm thinking about a __napi_schedule version that disables hard irq's
conditionally, based on variable force_irqthreads, exported by the irq
subsystem. This would allow to behave correctly with threadirqs set,
whilst not loosing the _irqoff benefit with threadirqs unset.
Let me come up with a proposal.