[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Sun, 11 Oct 2020 01:41:07 +0300
From: Serge Semin <Sergey.Semin@...kalelectronics.ru>
To: Mathias Nyman <mathias.nyman@...el.com>,
Felipe Balbi <balbi@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh+dt@...nel.org>
CC: Serge Semin <Sergey.Semin@...kalelectronics.ru>,
Serge Semin <fancer.lancer@...il.com>,
Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
Pavel Parkhomenko <Pavel.Parkhomenko@...kalelectronics.ru>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Manu Gautam <mgautam@...eaurora.org>,
Roger Quadros <rogerq@...com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
Neil Armstrong <narmstrong@...libre.com>,
Kevin Hilman <khilman@...libre.com>,
<linux-usb@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH 04/18] dt-bindings: usb: usb-hcd: Add "ulpi/serial/hsic" PHY types
Aside from the UTMI+ there are also ULPI, Serial and HSIC PHY types
can be specified in the phy_type HCD property. Add them to the
enumeration of the acceptable values.
Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
---
Documentation/devicetree/bindings/usb/usb-hcd.yaml | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
index 39e90147dfcc..1eddcbf0a9d8 100644
--- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
+++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
@@ -42,11 +42,13 @@ properties:
phy_type:
description: |
Tells USB controllers that we want to configure the core to support a
- UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is selected. In case
- this isn't passed via DT, USB controllers should default to HW
- capability.
+ UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is selected, UTMI+ low
+ pin interface if ULPI is specified, Serial core/PHY interconnect if
+ serial is specified and High-Speed Inter-Chip feature if HSIC is
+ selected. In case this isn't passed via DT, USB controllers should
+ default to HW capability.
$ref: /schemas/types.yaml#/definitions/string
- enum: ["utmi", "utmi_wide"]
+ enum: ["utmi", "utmi_wide", "ulpi", "serial", "hsic"]
otg-rev:
description: |
--
2.27.0
Powered by blists - more mailing lists