[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <5af74a17-6a93-5ac2-533e-8fca5c8d2faf@linaro.org>
Date: Sat, 10 Oct 2020 04:21:45 +0300
From: Stanimir Varbanov <stanimir.varbanov@...aro.org>
To: vgarodia@...eaurora.org,
Stanimir Varbanov <stanimir.varbanov@...aro.org>
Cc: linux-media@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org,
Alexandre Courbot <acourbot@...omium.org>,
Mansur Alisha Shaik <mansur@...eaurora.org>
Subject: Re: [PATCH 2/3] venus: vdec: Make decoder return LAST flag for
sufficient event
Hi Vikash,
On 10/7/20 10:53 PM, vgarodia@...eaurora.org wrote:
> Hi Stan,
>
> On 2020-09-28 22:14, Stanimir Varbanov wrote:
>> This makes the decoder to behaives equally for sufficient and
> behaves
>
>> insufficient events. After this change the LAST buffer flag will be set
>> when the new resolution (in dynamic-resolution-change state) is smaller
>> then the old bitstream resolution.
>>
>> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@...aro.org>
>> ---
>> drivers/media/platform/qcom/venus/vdec.c | 41 ++++++++++++++++--------
>> 1 file changed, 27 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/media/platform/qcom/venus/vdec.c
>> b/drivers/media/platform/qcom/venus/vdec.c
>> index c11bdf3ca21b..c006401255dc 100644
>> --- a/drivers/media/platform/qcom/venus/vdec.c
>> +++ b/drivers/media/platform/qcom/venus/vdec.c
>> @@ -634,6 +634,7 @@ static int vdec_output_conf(struct venus_inst *inst)
>> {
>> struct venus_core *core = inst->core;
>> struct hfi_enable en = { .enable = 1 };
>> + struct hfi_buffer_requirements bufreq;
>> u32 width = inst->out_width;
>> u32 height = inst->out_height;
>> u32 out_fmt, out2_fmt;
>> @@ -709,6 +710,22 @@ static int vdec_output_conf(struct venus_inst *inst)
>> }
>>
>> if (IS_V3(core) || IS_V4(core)) {
>> + ret = venus_helper_get_bufreq(inst, HFI_BUFFER_OUTPUT, &bufreq);
>> + if (ret)
>> + return ret;
>> +
>> + if (bufreq.size > inst->output_buf_size)
>> + return -EINVAL;
>> +
>> + if (inst->dpb_fmt) {
>> + ret = venus_helper_get_bufreq(inst, HFI_BUFFER_OUTPUT2,
>> &bufreq);
>> + if (ret)
>> + return ret;
>> +
>> + if (bufreq.size > inst->output2_buf_size)
>> + return -EINVAL;
>> + }
>> +
>> if (inst->output2_buf_size) {
>> ret = venus_helper_set_bufsize(inst,
>> inst->output2_buf_size,
>> @@ -1327,19 +1344,15 @@ static void vdec_event_change(struct
>> venus_inst *inst,
>> dev_dbg(dev, VDBGM "event %s sufficient resources (%ux%u)\n",
>> sufficient ? "" : "not", ev_data->width, ev_data->height);
>>
>> - if (sufficient) {
>> - hfi_session_continue(inst);
>> - } else {
>> - switch (inst->codec_state) {
>> - case VENUS_DEC_STATE_INIT:
>> - inst->codec_state = VENUS_DEC_STATE_CAPTURE_SETUP;
>> - break;
>> - case VENUS_DEC_STATE_DECODING:
>> - inst->codec_state = VENUS_DEC_STATE_DRC;
>> - break;
>> - default:
>> - break;
>> - }
>> + switch (inst->codec_state) {
>> + case VENUS_DEC_STATE_INIT:
>> + inst->codec_state = VENUS_DEC_STATE_CAPTURE_SETUP;
>> + break;
>> + case VENUS_DEC_STATE_DECODING:
>> + inst->codec_state = VENUS_DEC_STATE_DRC;
>
> Video firmware would raise reconfig event to driver even for cases like
> interlace detection, color space change in the bitstream. If not with
> this patch,
> we can optimize by sending reconfig event only for resolution and
> bitdepth update,
> in a followup patch.
Good point. Sure, I can do that in this series as separate patch.
>
>> + break;
>> + default:
>> + break;
>> }
>>
>> /*
>> @@ -1348,7 +1361,7 @@ static void vdec_event_change(struct venus_inst
>> *inst,
>> * itself doesn't mark the last decoder output buffer with HFI
>> EOS flag.
>> */
>>
>> - if (!sufficient && inst->codec_state == VENUS_DEC_STATE_DRC) {
>> + if (inst->codec_state == VENUS_DEC_STATE_DRC) {
>> struct vb2_v4l2_buffer *last;
>> int ret;
--
regards,
Stan
Powered by blists - more mailing lists