linux-kernel - Re: [PATCH 1/3] arm64: dts: imx8mm: Correct WDOG

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAJKOXPdwsoN1Dnqs9gZTibqoy5vRTPwpLLmohHoguSCiq+UWHA@mail.gmail.com>
Date:   Mon, 12 Oct 2020 08:52:42 +0200
From:   Krzysztof Kozlowski <krzk@...nel.org>
To:     Anson Huang <Anson.Huang@....com>
Cc:     robh+dt@...nel.org, shawnguo@...nel.org, s.hauer@...gutronix.de,
        kernel@...gutronix.de, festevam@...il.com, aford173@...il.com,
        daniel.baluta@....com, shengjiu.wang@....com, peter.chen@....com,
        alifer.wsdm@...il.com, abel.vesa@....com, yibin.gong@....com,
        jun.li@....com, l.stach@...gutronix.de, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Linux-imx@....com
Subject: Re: [PATCH 1/3] arm64: dts: imx8mm: Correct WDOG_B pin configuration

On Fri, 9 Oct 2020 at 09:52, Anson Huang <Anson.Huang@....com> wrote:
>
> Different revision of i.MX8MM EVK boards may have different external
> pull up registor design, some are enabled while some are NOT, to make
> sure the WDOG_B pin works properly, better to enable internal pull up
> resistor. Since enabling internal pull up resistor is NOT harmful and
> having benefit of flexibility on different board design, just enable
> it for all i.MX8MM boards.
>
> Signed-off-by: Anson Huang <Anson.Huang@....com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi | 2 +-
>  arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi        | 2 +-
>  arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi    | 2 +-
>  3 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
> index 6de86a4..a941301 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
> @@ -398,7 +398,7 @@
>
>                 pinctrl_wdog: wdoggrp {
>                         fsl,pins = <
> -                               MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B            0xc6
> +                               MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B            0x166

Enabling pull up makes sense but you change other bits - disable
Schmitt input and enable open drain. This change is not documented /
explained in commit msg.

Best regards,
Krzysztof