linux-kernel - RE: [PATCH v2] usb: cdns3: Rids of duplicate error message

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <DM6PR07MB552936CAFDDD55189FCCA37DDD070@DM6PR07MB5529.namprd07.prod.outlook.com>
Date:   Mon, 12 Oct 2020 12:26:46 +0000
From:   Pawel Laszczak <pawell@...ence.com>
To:     Peter Chen <peter.chen@....com>, Roger Quadros <rogerq@...com>
CC:     "balbi@...nel.org" <balbi@...nel.org>,
        "gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
        "linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Rahul Kumar <kurahul@...ence.com>
Subject: RE: [PATCH v2] usb: cdns3: Rids of duplicate error message


>
>On 20-10-12 14:38:16, Roger Quadros wrote:
>> Pawel,
>>
>> On 12/10/2020 14:12, Pawel Laszczak wrote:
>> > Hi Roger,
>> >
>> > On 12/10/2020 09:42, Pawel Laszczak wrote:
>> > > On failure, the platform_get_irq_byname prints an error message
>> > > so, patch removes error message related to this function from
>> > > core.c file.
>> > >
>> > > A change was suggested during reviewing CDNSP driver by Chunfeng Yun.
>> > >
>> > > Signed-off-by: Pawel Laszczak <pawell@...ence.com>
>> > > ---
>> > > Changelog:
>> > > v2
>> > > - simplified code as sugested by Roger Quadros.
>> > >
>> > >    drivers/usb/cdns3/core.c | 10 +---------
>> > >    1 file changed, 1 insertion(+), 9 deletions(-)
>> > >
>> > > diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
>> > > index a0f73d4711ae..85ef3025b293 100644
>> > > --- a/drivers/usb/cdns3/core.c
>> > > +++ b/drivers/usb/cdns3/core.c
>> > > @@ -469,22 +469,14 @@ static int cdns3_probe(struct platform_device *pdev)
>> > >    	if (cdns->dev_irq == -EPROBE_DEFER)
>> >
>> > Shouldn't this be
>> > 	if (cdns->dev_irq < 0)
>> > ?
>> >
>> > No, such line will change the original behavior of driver.
>> >
>> > Current patch allows to run driver when we support only host.
>> > In such case the dev_irq can be < 0 and we still can use host  side.
>>
>> In that case should we check if we need dev_irq and if so then error out.
>> i.e. if mode is "peripheral" or "otg"
>>
>> Also DT binding document says all 3 IRQs are mandatory. Do we need to update that?
>>
>
>I agree with Roger, or you change the driver behaviour that return error
>if the dev_irq is < 0.

Ok, I will  change the  condition as suggested by Roger. 

Pawel
>
>Peter
>>
>> >
>> > Regards,
>> > Pawel Laszczak
>> >
>> > >    		return cdns->dev_irq;
>> > > -	if (cdns->dev_irq < 0)
>> > > -		dev_err(dev, "couldn't get peripheral irq\n");
>> > > -
>> > >    	regs = devm_platform_ioremap_resource_byname(pdev, "dev");
>> > >    	if (IS_ERR(regs))
>> > >    		return PTR_ERR(regs);
>> > >    	cdns->dev_regs	= regs;
>> > >    	cdns->otg_irq = platform_get_irq_byname(pdev, "otg");
>> > > -	if (cdns->otg_irq == -EPROBE_DEFER)
>> > > -		return cdns->otg_irq;
>> > > -
>> > > -	if (cdns->otg_irq < 0) {
>> > > -		dev_err(dev, "couldn't get otg irq\n");
>> > > +	if (cdns->otg_irq < 0)
>> > >    		return cdns->otg_irq;
>> > > -	}
>> > >    	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otg");
>> > >    	if (!res) {
>> > >
>> >
>>
>> --
>> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
>> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>
>--
>
>Thanks,
>Peter Chen