| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <9bcaaa2a-1a84-9d64-14a3-75b5f3094483@st.com>
Date: Tue, 13 Oct 2020 07:02:18 +0000
From: Yannick FERTRE <yannick.fertre@...com>
To: Sam Ravnborg <sam@...nborg.org>
CC: Philippe CORNU <philippe.cornu@...com>,
Antonio BORNEO <antonio.borneo@...com>,
Vincent ABRIOU <vincent.abriou@...com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre TORGUE <alexandre.torgue@...com>,
"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"linux-stm32@...md-mailman.stormreply.com"
<linux-stm32@...md-mailman.stormreply.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] drm/stm: dsi: Use dev_ based logging
Hi Sam,
thanks for the review. I'll send a new patch with the revert of function
dsi_color_from_mipi.
Best regards
Yannick
On 9/25/20 4:51 PM, Sam Ravnborg wrote:
> Hi Yannick.
>
> On Fri, Sep 25, 2020 at 12:22:33PM +0200, Yannick Fertre wrote:
>> Standardize on the dev_ based logging and drop the include of drm_print.h.
> The patchs filas to drop the include mentioned here.
>
>> Remove useless dsi_color_from_mipi function.
> IMO the dsi_color_from_mipi() was nice, and inlining the helper
> is no gain for readability.
>
> Sam
>
>>
>> Signed-off-by: Yannick Fertre <yannick.fertre@...com>
>> ---
>> drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 87 ++++++++++++++-------------
>> 1 file changed, 45 insertions(+), 42 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
>> index 164f79ef6269..93fa8bfd3127 100644
>> --- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
>> +++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
>> @@ -76,6 +76,7 @@ enum dsi_color {
>>
>> struct dw_mipi_dsi_stm {
>> void __iomem *base;
>> + struct device *dev;
>> struct clk *pllref_clk;
>> struct dw_mipi_dsi *dsi;
>> u32 hw_version;
>> @@ -110,23 +111,6 @@ static inline void dsi_update_bits(struct dw_mipi_dsi_stm *dsi, u32 reg,
>> dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val);
>> }
>>
>> -static enum dsi_color dsi_color_from_mipi(enum mipi_dsi_pixel_format fmt)
>> -{
>> - switch (fmt) {
>> - case MIPI_DSI_FMT_RGB888:
>> - return DSI_RGB888;
>> - case MIPI_DSI_FMT_RGB666:
>> - return DSI_RGB666_CONF2;
>> - case MIPI_DSI_FMT_RGB666_PACKED:
>> - return DSI_RGB666_CONF1;
>> - case MIPI_DSI_FMT_RGB565:
>> - return DSI_RGB565_CONF1;
>> - default:
>> - DRM_DEBUG_DRIVER("MIPI color invalid, so we use rgb888\n");
>> - }
>> - return DSI_RGB888;
>> -}
>> -
>> static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf)
>> {
>> int divisor = idf * odf;
>> @@ -205,14 +189,14 @@ static int dw_mipi_dsi_phy_init(void *priv_data)
>> ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS,
>> SLEEP_US, TIMEOUT_US);
>> if (ret)
>> - DRM_DEBUG_DRIVER("!TIMEOUT! waiting REGU, let's continue\n");
>> + dev_dbg(dsi->dev, "!TIMEOUT! waiting REGU, let's continue\n");
>>
>> /* Enable the DSI PLL & wait for its lock */
>> dsi_set(dsi, DSI_WRPCR, WRPCR_PLLEN);
>> ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS,
>> SLEEP_US, TIMEOUT_US);
>> if (ret)
>> - DRM_DEBUG_DRIVER("!TIMEOUT! waiting PLL, let's continue\n");
>> + dev_dbg(dsi->dev, "!TIMEOUT! waiting PLL, let's continue\n");
>>
>> return 0;
>> }
>> @@ -221,7 +205,7 @@ static void dw_mipi_dsi_phy_power_on(void *priv_data)
>> {
>> struct dw_mipi_dsi_stm *dsi = priv_data;
>>
>> - DRM_DEBUG_DRIVER("\n");
>> + dev_dbg(dsi->dev, "\n");
>>
>> /* Enable the DSI wrapper */
>> dsi_set(dsi, DSI_WCR, WCR_DSIEN);
>> @@ -231,7 +215,7 @@ static void dw_mipi_dsi_phy_power_off(void *priv_data)
>> {
>> struct dw_mipi_dsi_stm *dsi = priv_data;
>>
>> - DRM_DEBUG_DRIVER("\n");
>> + dev_dbg(dsi->dev, "\n");
>>
>> /* Disable the DSI wrapper */
>> dsi_clear(dsi, DSI_WCR, WCR_DSIEN);
>> @@ -244,6 +228,7 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
>> {
>> struct dw_mipi_dsi_stm *dsi = priv_data;
>> unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz;
>> + enum mipi_dsi_pixel_format fmt;
>> int ret, bpp;
>> u32 val;
>>
>> @@ -267,11 +252,11 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
>>
>> if (pll_out_khz > dsi->lane_max_kbps) {
>> pll_out_khz = dsi->lane_max_kbps;
>> - DRM_WARN("Warning max phy mbps is used\n");
>> + dev_warn(dsi->dev, "Warning max phy mbps is used\n");
>> }
>> if (pll_out_khz < dsi->lane_min_kbps) {
>> pll_out_khz = dsi->lane_min_kbps;
>> - DRM_WARN("Warning min phy mbps is used\n");
>> + dev_warn(dsi->dev, "Warning min phy mbps is used\n");
>> }
>>
>> /* Compute best pll parameters */
>> @@ -281,7 +266,7 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
>> ret = dsi_pll_get_params(dsi, pll_in_khz, pll_out_khz,
>> &idf, &ndiv, &odf);
>> if (ret)
>> - DRM_WARN("Warning dsi_pll_get_params(): bad params\n");
>> + dev_warn(dsi->dev, "Warning dsi_pll_get_params(): bad params\n");
>>
>> /* Get the adjusted pll out value */
>> pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf);
>> @@ -297,14 +282,31 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
>> /* Select video mode by resetting DSIM bit */
>> dsi_clear(dsi, DSI_WCFGR, WCFGR_DSIM);
>>
>> + switch (format) {
>> + case MIPI_DSI_FMT_RGB888:
>> + fmt = DSI_RGB888;
>> + break;
>> + case MIPI_DSI_FMT_RGB666:
>> + fmt = DSI_RGB666_CONF2;
>> + break;
>> + case MIPI_DSI_FMT_RGB666_PACKED:
>> + fmt = DSI_RGB666_CONF1;
>> + break;
>> + case MIPI_DSI_FMT_RGB565:
>> + fmt = DSI_RGB565_CONF1;
>> + break;
>> + default:
>> + fmt = DSI_RGB888;
>> + dev_err(dsi->dev, "MIPI color invalid, so we use rgb888\n");
>> + }
>> +
>> /* Select the color coding */
>> - dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX,
>> - dsi_color_from_mipi(format) << 1);
>> + dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX, fmt << 1);
>>
>> *lane_mbps = pll_out_khz / 1000;
>>
>> - DRM_DEBUG_DRIVER("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n",
>> - pll_in_khz, pll_out_khz, *lane_mbps);
>> + dev_dbg(dsi->dev, "pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n", pll_in_khz, pll_out_khz,
>> + *lane_mbps);
>>
>> return 0;
>> }
>> @@ -352,11 +354,13 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>> if (!dsi)
>> return -ENOMEM;
>>
>> + dsi->dev = dev;
>> +
>> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> dsi->base = devm_ioremap_resource(dev, res);
>> if (IS_ERR(dsi->base)) {
>> ret = PTR_ERR(dsi->base);
>> - DRM_ERROR("Unable to get dsi registers %d\n", ret);
>> + dev_err(dev, "Unable to get dsi registers %d\n", ret);
>> return ret;
>> }
>>
>> @@ -364,13 +368,13 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>> if (IS_ERR(dsi->vdd_supply)) {
>> ret = PTR_ERR(dsi->vdd_supply);
>> if (ret != -EPROBE_DEFER)
>> - DRM_ERROR("Failed to request regulator: %d\n", ret);
>> + dev_err(dev, "Failed to request regulator: %d\n", ret);
>> return ret;
>> }
>>
>> ret = regulator_enable(dsi->vdd_supply);
>> if (ret) {
>> - DRM_ERROR("Failed to enable regulator: %d\n", ret);
>> + dev_err(dev, "Failed to enable regulator: %d\n", ret);
>> return ret;
>> }
>>
>> @@ -378,27 +382,26 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>> if (IS_ERR(dsi->pllref_clk)) {
>> ret = PTR_ERR(dsi->pllref_clk);
>> if (ret != -EPROBE_DEFER)
>> - DRM_ERROR("Unable to get pll reference clock: %d\n",
>> - ret);
>> + dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
>> goto err_clk_get;
>> }
>>
>> ret = clk_prepare_enable(dsi->pllref_clk);
>> if (ret) {
>> - DRM_ERROR("Failed to enable pllref_clk: %d\n", ret);
>> + dev_err(dev, "Failed to enable pllref_clk: %d\n", ret);
>> goto err_clk_get;
>> }
>>
>> pclk = devm_clk_get(dev, "pclk");
>> if (IS_ERR(pclk)) {
>> ret = PTR_ERR(pclk);
>> - DRM_ERROR("Unable to get peripheral clock: %d\n", ret);
>> + dev_err(dev, "Unable to get peripheral clock: %d\n", ret);
>> goto err_dsi_probe;
>> }
>>
>> ret = clk_prepare_enable(pclk);
>> if (ret) {
>> - DRM_ERROR("%s: Failed to enable peripheral clk\n", __func__);
>> + dev_err(dev, "%s: Failed to enable peripheral clk\n", __func__);
>> goto err_dsi_probe;
>> }
>>
>> @@ -407,7 +410,7 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>>
>> if (dsi->hw_version != HWVER_130 && dsi->hw_version != HWVER_131) {
>> ret = -ENODEV;
>> - DRM_ERROR("bad dsi hardware version\n");
>> + dev_err(dev, "bad dsi hardware version\n");
>> goto err_dsi_probe;
>> }
>>
>> @@ -420,7 +423,7 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>> if (IS_ERR(dsi->dsi)) {
>> ret = PTR_ERR(dsi->dsi);
>> if (ret != -EPROBE_DEFER)
>> - DRM_ERROR("Failed to initialize mipi dsi host: %d\n", ret);
>> + dev_err(dev, "Failed to initialize mipi dsi host: %d\n", ret);
>> goto err_dsi_probe;
>> }
>>
>> @@ -449,7 +452,7 @@ static int __maybe_unused dw_mipi_dsi_stm_suspend(struct device *dev)
>> {
>> struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
>>
>> - DRM_DEBUG_DRIVER("\n");
>> + dev_dbg(dsi->dev, "\n");
>>
>> clk_disable_unprepare(dsi->pllref_clk);
>> regulator_disable(dsi->vdd_supply);
>> @@ -462,18 +465,18 @@ static int __maybe_unused dw_mipi_dsi_stm_resume(struct device *dev)
>> struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
>> int ret;
>>
>> - DRM_DEBUG_DRIVER("\n");
>> + dev_dbg(dsi->dev, "\n");
>>
>> ret = regulator_enable(dsi->vdd_supply);
>> if (ret) {
>> - DRM_ERROR("Failed to enable regulator: %d\n", ret);
>> + dev_err(dev, "Failed to enable regulator: %d\n", ret);
>> return ret;
>> }
>>
>> ret = clk_prepare_enable(dsi->pllref_clk);
>> if (ret) {
>> regulator_disable(dsi->vdd_supply);
>> - DRM_ERROR("Failed to enable pllref_clk: %d\n", ret);
>> + dev_err(dev, "Failed to enable pllref_clk: %d\n", ret);
>> return ret;
>> }
>>
>> --
>> 2.17.1
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@...ts.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Powered by blists - more mailing lists