[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1602609110-11504-2-git-send-email-tdas@codeaurora.org>
Date: Tue, 13 Oct 2020 22:41:48 +0530
From: Taniya Das <tdas@...eaurora.org>
To: Stephen Boyd <sboyd@...nel.org>,
Michael Turquette <mturquette@...libre.com>
Cc: David Brown <david.brown@...aro.org>,
Rajendra Nayak <rnayak@...eaurora.org>,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
Andy Gross <agross@...nel.org>, devicetree@...r.kernel.org,
robh@...nel.org, robh+dt@...nel.org,
Taniya Das <tdas@...eaurora.org>
Subject: [PATCH v2 1/3] clk: qcom: clk-alpha-pll: Add support for controlling Agera PLLs
Add programming sequence support for managing the Agera PLLs.
Signed-off-by: Taniya Das <tdas@...eaurora.org>
---
drivers/clk/qcom/clk-alpha-pll.c | 80 ++++++++++++++++++++++++++++++++++++++++
drivers/clk/qcom/clk-alpha-pll.h | 4 ++
2 files changed, 84 insertions(+)
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 26139ef..17e1fc0 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -116,6 +116,16 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
[PLL_OFF_OPMODE] = 0x38,
[PLL_OFF_ALPHA_VAL] = 0x40,
},
+ [CLK_ALPHA_PLL_TYPE_AGERA] = {
+ [PLL_OFF_L_VAL] = 0x04,
+ [PLL_OFF_ALPHA_VAL] = 0x08,
+ [PLL_OFF_USER_CTL] = 0x0c,
+ [PLL_OFF_CONFIG_CTL] = 0x10,
+ [PLL_OFF_CONFIG_CTL_U] = 0x14,
+ [PLL_OFF_TEST_CTL] = 0x18,
+ [PLL_OFF_TEST_CTL_U] = 0x1c,
+ [PLL_OFF_STATUS] = 0x2c,
+ },
};
EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
@@ -1561,3 +1571,73 @@ const struct clk_ops clk_alpha_pll_postdiv_lucid_ops = {
.set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
};
EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_ops);
+
+void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+ const struct alpha_pll_config *config)
+{
+ if (config->l)
+ regmap_write(regmap, PLL_L_VAL(pll), config->l);
+
+ if (config->alpha)
+ regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
+
+ if (config->user_ctl_val)
+ regmap_write(regmap, PLL_USER_CTL(pll), config->user_ctl_val);
+
+ if (config->config_ctl_val)
+ regmap_write(regmap, PLL_CONFIG_CTL(pll),
+ config->config_ctl_val);
+
+ if (config->config_ctl_hi_val)
+ regmap_write(regmap, PLL_CONFIG_CTL_U(pll),
+ config->config_ctl_hi_val);
+
+ if (config->test_ctl_val)
+ regmap_write(regmap, PLL_TEST_CTL(pll),
+ config->test_ctl_val);
+
+ if (config->test_ctl_hi_val)
+ regmap_write(regmap, PLL_TEST_CTL_U(pll),
+ config->test_ctl_hi_val);
+}
+EXPORT_SYMBOL_GPL(clk_agera_pll_configure);
+
+static int clk_alpha_pll_agera_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long prate)
+{
+ struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+ u32 l, alpha_width = pll_alpha_width(pll);
+ unsigned long rrate, max = rate + PLL_RATE_MARGIN;
+ u64 a;
+
+ rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
+
+ /*
+ * Due to limited number of bits for fractional rate programming, the
+ * rounded up rate could be marginally higher than the requested rate.
+ */
+ if (rrate > (rate + PLL_RATE_MARGIN) || rrate < rate) {
+ pr_err("%s: Rounded rate %lu not within range [%lu, %lu)\n",
+ clk_hw_get_name(hw), rrate, rate, max);
+ return -EINVAL;
+ }
+
+ /* change L_VAL without having to go through the power on sequence */
+ regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
+ regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
+
+ if (clk_hw_is_enabled(hw))
+ return wait_for_pll_enable_lock(pll);
+
+ return 0;
+}
+
+const struct clk_ops clk_alpha_pll_agera_ops = {
+ .enable = clk_alpha_pll_enable,
+ .disable = clk_alpha_pll_disable,
+ .is_enabled = clk_alpha_pll_is_enabled,
+ .recalc_rate = alpha_pll_fabia_recalc_rate,
+ .round_rate = clk_alpha_pll_round_rate,
+ .set_rate = clk_alpha_pll_agera_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index d3201b8..0ea30d2 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -15,6 +15,7 @@ enum {
CLK_ALPHA_PLL_TYPE_FABIA,
CLK_ALPHA_PLL_TYPE_TRION,
CLK_ALPHA_PLL_TYPE_LUCID = CLK_ALPHA_PLL_TYPE_TRION,
+ CLK_ALPHA_PLL_TYPE_AGERA,
CLK_ALPHA_PLL_TYPE_MAX,
};
@@ -141,6 +142,7 @@ extern const struct clk_ops clk_alpha_pll_postdiv_trion_ops;
extern const struct clk_ops clk_alpha_pll_lucid_ops;
#define clk_alpha_pll_fixed_lucid_ops clk_alpha_pll_fixed_trion_ops
extern const struct clk_ops clk_alpha_pll_postdiv_lucid_ops;
+extern const struct clk_ops clk_alpha_pll_agera_ops;
void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
const struct alpha_pll_config *config);
@@ -148,6 +150,8 @@ void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
const struct alpha_pll_config *config);
void clk_trion_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
const struct alpha_pll_config *config);
+void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+ const struct alpha_pll_config *config);
#define clk_lucid_pll_configure(pll, regmap, config) \
clk_trion_pll_configure(pll, regmap, config)
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
Powered by blists - more mailing lists