[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CACPK8Xe_O44BUaPCEm2j3ZN+d4q6JbjEttLsiCLbWF6GnaqSPg@mail.gmail.com>
Date: Wed, 14 Oct 2020 06:41:21 +0000
From: Joel Stanley <joel@....id.au>
To: Dylan Hung <dylan_hung@...eedtech.com>
Cc: "David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Po-Yu Chuang <ratbert@...aday-tech.com>,
linux-aspeed <linux-aspeed@...ts.ozlabs.org>,
OpenBMC Maillist <openbmc@...ts.ozlabs.org>,
BMC-SW <BMC-SW@...eedtech.com>
Subject: Re: [PATCH 1/1] net: ftgmac100: Fix Aspeed ast2600 TX hang issue
On Wed, 14 Oct 2020 at 06:07, Dylan Hung <dylan_hung@...eedtech.com> wrote:
>
> The new HW arbitration feature on Aspeed ast2600 will cause MAC TX to
> hang when handling scatter-gather DMA. Disable the problematic feature
> by setting MAC register 0x58 bit28 and bit27.
Hi Dylan,
What are the symptoms of this issue? We are seeing this on our systems:
[29376.090637] WARNING: CPU: 0 PID: 9 at net/sched/sch_generic.c:442
dev_watchdog+0x2f0/0x2f4
[29376.099898] NETDEV WATCHDOG: eth0 (ftgmac100): transmit queue 0 timed out
> Signed-off-by: Dylan Hung <dylan_hung@...eedtech.com>
This fixes support for the ast2600, so we can put:
Fixes: 39bfab8844a0 ("net: ftgmac100: Add support for DT phy-handle property")
Reviewed-by: Joel Stanley <joel@....id.au>
> ---
> drivers/net/ethernet/faraday/ftgmac100.c | 5 +++++
> drivers/net/ethernet/faraday/ftgmac100.h | 8 ++++++++
> 2 files changed, 13 insertions(+)
>
> diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
> index 87236206366f..00024dd41147 100644
> --- a/drivers/net/ethernet/faraday/ftgmac100.c
> +++ b/drivers/net/ethernet/faraday/ftgmac100.c
> @@ -1817,6 +1817,11 @@ static int ftgmac100_probe(struct platform_device *pdev)
> priv->rxdes0_edorr_mask = BIT(30);
> priv->txdes0_edotr_mask = BIT(30);
> priv->is_aspeed = true;
> + /* Disable ast2600 problematic HW arbitration */
> + if (of_device_is_compatible(np, "aspeed,ast2600-mac")) {
> + iowrite32(FTGMAC100_TM_DEFAULT,
> + priv->base + FTGMAC100_OFFSET_TM);
> + }
> } else {
> priv->rxdes0_edorr_mask = BIT(15);
> priv->txdes0_edotr_mask = BIT(15);
> diff --git a/drivers/net/ethernet/faraday/ftgmac100.h b/drivers/net/ethernet/faraday/ftgmac100.h
> index e5876a3fda91..63b3e02fab16 100644
> --- a/drivers/net/ethernet/faraday/ftgmac100.h
> +++ b/drivers/net/ethernet/faraday/ftgmac100.h
> @@ -169,6 +169,14 @@
> #define FTGMAC100_MACCR_FAST_MODE (1 << 19)
> #define FTGMAC100_MACCR_SW_RST (1 << 31)
>
> +/*
> + * test mode control register
> + */
> +#define FTGMAC100_TM_RQ_TX_VALID_DIS (1 << 28)
> +#define FTGMAC100_TM_RQ_RR_IDLE_PREV (1 << 27)
> +#define FTGMAC100_TM_DEFAULT \
> + (FTGMAC100_TM_RQ_TX_VALID_DIS | FTGMAC100_TM_RQ_RR_IDLE_PREV)
Will aspeed issue an updated datasheet with this register documented?
> +
> /*
> * PHY control register
> */
> --
> 2.17.1
>
Powered by blists - more mailing lists