linux-kernel - Re: [PATCH 1/3] soc: qcom: geni: More properly switch to DMA mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CAD=FV=VWPqswOXJejyXjYT_Yspdu75ELq42cffN87FrpTwPUQg@mail.gmail.com>
Date:   Tue, 13 Oct 2020 14:35:42 -0700
From:   Doug Anderson <dianders@...omium.org>
To:     Akash Asthana <akashast@...eaurora.org>
Cc:     Stephen Boyd <swboyd@...omium.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Wolfram Sang <wsa@...nel.org>,
        linux-arm-msm <linux-arm-msm@...r.kernel.org>,
        linux-i2c@...r.kernel.org, Andy Gross <agross@...nel.org>,
        Girish Mahadevan <girishm@...eaurora.org>,
        Karthikeyan Ramasubramanian <kramasub@...eaurora.org>,
        Mukesh Kumar Savaliya <msavaliy@...eaurora.org>,
        LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/3] soc: qcom: geni: More properly switch to DMA mode

Hi,

On Mon, Oct 12, 2020 at 2:05 AM Akash Asthana <akashast@...eaurora.org> wrote:
>
> Hi Stephen,
>
>
> >>
> >>   static void geni_se_select_dma_mode(struct geni_se *se)
> >>   {
> >> +       u32 proto = geni_se_read_proto(se);
> >>          u32 val;
> >>
> >>          geni_se_irq_clear(se);
> >>
> >> +       val = readl_relaxed(se->base + SE_GENI_M_IRQ_EN);
> >> +       if (proto != GENI_SE_UART) {
> > Not a problem with this patch but it would be great if there was a
> > comment here (and probably in geni_se_select_fifo_mode() too) indicating
> > why GENI_SE_UART is special. Is it because GENI_SE_UART doesn't use the
> > main sequencer? I think that is the reason, but I forgot and reading
> > this code doesn't tell me that.
> >
> > Splitting the driver in this way where the logic is in the geni wrapper
> > and in the engine driver leads to this confusion.
>
> GENI_SE_UART uses main sequencer for TX and secondary for RX transfers
> because it is asynchronous in nature.
>
> That's why  RX related bits (M_RX_FIFO_WATERMARK_EN |
> M_RX_FIFO_LAST_EN)  are not enable in main sequencer for UART.
>
> (M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN) bits are controlled from UART
> driver, it's gets enabled and disabled multiple times from start_tx
> ,stop_tx respectively.

For now I've "solved" this by adding some comments (in the 3rd patch)
basically summarizing what Akash said.  I didn't want to go further
than that for now because it felt more important to get the i2c bug
fixed sooner rather than later and re-organizing would be a big enough
change that it'd probably need a few spins.

Our bug trackers don't make it trivially easy to file a public bug
tracking this and assign it to Qualcomm, but I've filed a bug asking
folks at Qualcomm to help with re-organizing things after my patch
series lands.  This is internally tracked at Google as b:170766462
("Rejigger geni_se_select_fifo_mode() / geni_se_select_dma_mode() to
not manage interrupt enables").

-Doug