linux-kernel - [PATCH v3 1/5] arm64: tegra: Enable signal voltage switching on Tegra194 SDMMC1 and SDMMC3

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201014175627.5585-2-tszucs@protonmail.ch>
Date:   Wed, 14 Oct 2020 19:56:23 +0200
From:   Tamás Szűcs <tszucs@...tonmail.ch>
To:     Rob Herring <robh+dt@...nel.org>,
        Thierry Reding <thierry.reding@...il.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        JC Kuo <jckuo@...dia.com>, Vidya Sagar <vidyas@...dia.com>,
        Sameer Pujar <spujar@...dia.com>, devicetree@...r.kernel.org,
        linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Tamás Szűcs <tszucs@...tonmail.ch>
Subject: [PATCH v3 1/5] arm64: tegra: Enable signal voltage switching on Tegra194 SDMMC1 and SDMMC3

Add pad voltage configuration nodes for SDMMC pads with configurable voltages
and enable supported SD card, SDIO and eMMC modes.

Signed-off-by: Tamás Szűcs <tszucs@...tonmail.ch>
---
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 45 ++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index e9c90f0f44ff..058fdb1ffa1a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/tegra186-hsp.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
 #include <dt-bindings/power/tegra194-powergate.h>
 #include <dt-bindings/reset/tegra194-reset.h>
 #include <dt-bindings/thermal/tegra194-bpmp-thermal.h>
@@ -705,6 +706,9 @@
 			interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRA &emc>,
 					<&mc TEGRA194_MEMORY_CLIENT_SDMMCWA &emc>;
 			interconnect-names = "dma-mem", "write";
+			pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+			pinctrl-0 = <&sdmmc1_3v3>;
+			pinctrl-1 = <&sdmmc1_1v8>;
 			nvidia,pad-autocal-pull-up-offset-3v3-timeout =
 									<0x07>;
 			nvidia,pad-autocal-pull-down-offset-3v3-timeout =
@@ -716,6 +720,15 @@
 			nvidia,pad-autocal-pull-down-offset-sdr104 = <0x00>;
 			nvidia,default-tap = <0x9>;
 			nvidia,default-trim = <0x5>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			sd-uhs-sdr104;
+			cap-sdio-irq;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
 			status = "disabled";
 		};
 
@@ -731,6 +744,9 @@
 			interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCR &emc>,
 					<&mc TEGRA194_MEMORY_CLIENT_SDMMCW &emc>;
 			interconnect-names = "dma-mem", "write";
+			pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+			pinctrl-0 = <&sdmmc3_3v3>;
+			pinctrl-1 = <&sdmmc3_1v8>;
 			nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
 			nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>;
 			nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
@@ -743,6 +759,15 @@
 			nvidia,pad-autocal-pull-down-offset-sdr104 = <0x00>;
 			nvidia,default-tap = <0x9>;
 			nvidia,default-trim = <0x5>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			sd-uhs-sdr104;
+			cap-sdio-irq;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
 			status = "disabled";
 		};
 
@@ -1269,6 +1294,26 @@
 
 			#interrupt-cells = <2>;
 			interrupt-controller;
+
+			sdmmc1_3v3: sdmmc1-3v3 {
+				pins = "sdmmc1-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+
+			sdmmc1_1v8: sdmmc1-1v8 {
+				pins = "sdmmc1-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+
+			sdmmc3_3v3: sdmmc3-3v3 {
+				pins = "sdmmc3-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+
+			sdmmc3_1v8: sdmmc3-1v8 {
+				pins = "sdmmc3-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
 		};
 
 		host1x@...00000 {
-- 
2.20.1