linux-kernel - Re: fw_devlink on will break all snps,dw-apb-gpio users

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20201015120206.41b6a454@xhacker.debian>
Date:   Thu, 15 Oct 2020 12:02:06 +0800
From:   Jisheng Zhang <Jisheng.Zhang@...aptics.com>
To:     Saravana Kannan <saravanak@...gle.com>
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        "Rafael J. Wysocki" <rafael@...nel.org>,
        LKML <linux-kernel@...r.kernel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Frank Rowand <frowand.list@...il.com>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>
Subject: Re: fw_devlink on will break all snps,dw-apb-gpio users

On Wed, 14 Oct 2020 10:29:36 -0700
Saravana Kannan <saravanak@...gle.com> wrote:

> CAUTION: Email originated externally, do not click links or open attachments unless you recognize the sender and know the content is safe.
> 
> 
> On Wed, Oct 14, 2020 at 4:12 AM Jisheng Zhang
> <Jisheng.Zhang@...aptics.com> wrote:
> >
> > Hi,
> >
> > If set fw_devlink as on, any consumers of dw apb gpio won't probe.
> >
> > The related dts looks like:
> >
> > gpio0: gpio@...0 {
> >        compatible = "snps,dw-apb-gpio";
> >        #address-cells = <1>;
> >        #size-cells = <0>;
> >
> >        porta: gpio-port@0 {
> >               compatible = "snps,dw-apb-gpio-port";
> >               gpio-controller;
> >               #gpio-cells = <2>;
> >               ngpios = <32>;
> >               reg = <0>;
> >        };
> > };
> >
> > device_foo {
> >         status = "okay"
> >         ...;
> >         reset-gpio = <&porta, 0, GPIO_ACTIVE_HIGH>;
> > };
> >
> > If I change the reset-gpio property to use another kind of gpio phandle,
> > e.g gpio expander, then device_foo can be probed successfully.
> >
> > The gpio expander dt node looks like:
> >
> >         expander3: gpio@44 {
> >                 compatible = "fcs,fxl6408";
> >                 pinctrl-names = "default";
> >                 pinctrl-0 = <&expander3_pmux>;
> >                 reg = <0x44>;
> >                 gpio-controller;
> >                 #gpio-cells = <2>;
> >                 interrupt-parent = <&portb>;
> >                 interrupts = <23 IRQ_TYPE_NONE>;
> >                 interrupt-controller;
> >                 #interrupt-cells = <2>;
> >         };
> >
> > The common pattern looks like the devlink can't cope with suppliers from
> > child dt node.  
> 
> fw_devlink doesn't have any problem dealing with child devices being
> suppliers. The problem with your case is that the
> drivers/gpio/gpio-dwapb.c driver directly parses the child nodes and
> never creates struct devices for them. If you have a node with
> compatible string, fw_devlink expects you to create and probe a struct
> device for it. So change your driver to add the child devices as
> devices instead of just parsing the node directly and doing stuff with
> it.
> 
> Either that, or stop putting "compatible" string in a node if you
> don't plan to actually treat it as a device -- but that's too late for
> this driver (it needs to be backward compatible). So change the driver
> to add of_platform_populate() and write a driver that probes
> "snps,dw-apb-gpio-port".
> 

Thanks for the information. The "snps,dw-apb-gpio-port" is never used,
so I just sent out a series to remove it.

Thanks