linux-kernel - [PATCH v3 0/1] fix i2c polling mode workaround for FU540-C000 SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1602770907-61852-1-git-send-email-sagar.kadam@sifive.com>
Date:   Thu, 15 Oct 2020 07:08:26 -0700
From:   Sagar Shrikant Kadam <sagar.kadam@...ive.com>
To:     linux-kernel@...r.kernel.org
Cc:     linux-riscv@...ts.infradead.org, linux-i2c@...r.kernel.org,
        peter@...sgaard.com, andrew@...n.ch, paul.walmsley@...ive.com,
        palmer@...belt.com, aou@...s.berkeley.edu,
        Sagar Shrikant Kadam <sagar.kadam@...ive.com>
Subject: [PATCH v3 0/1] fix i2c polling mode workaround for FU540-C000 SoC

The polling mode workaround for the FU540-C000 on HiFive Unleashed A00
board was added earlier. The logic for this seems to work only in case
the interrupt property was missing/not added into the i2c0 device node.

Here we address this issue by identifying the SOC based on compatibility
string and set the master xfer's to polling mode if it's the FU540-C000
SoC.

The fix has been tested on Linux 5.9.0-rc8 with a PMOD based RTCC sensor
connected to I2C pins J1 header of the board. Log for reference

# uname -a
Linux buildroot 5.9.0-rc8-00001-g9da7791 #1 SMP Fri Oct 9 07:56:13 PDT 2020 riscv64 GNU/Linux
# i2cdetect -y 0
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- 57 -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 6f
70: -- -- -- -- -- -- -- --
# i2cget 0 0x57 0 b -y
0xa5
# i2cset 0 0x57 0 0x9f b -y
# i2cget 0 0x57 0 b -y
0x9f
# i2cget 0 0x57 1 b -y
0xff
# i2cset 0 0x57 1 0xa9 b -y
# i2cget 0 0x57 1 b -y
0xa9
# i2cget 0 0x6f 0x20 b -y
0x98
# i2cset 0 0x6f 0x20 0xa5 b -y
# i2cget 0 0x6f 0x20 b -y
0xa5
# i2cget 0 0x6f 0x5f b -y
0x55
# i2cset 0 0x6f 0x5f 0x5a b -y
# i2cget 0 0x6f 0x5f b -y
0x5a
#

Without the fix here, it's observed that "i2cdetect -y 0"
turns the system unresponsive, with CPU stall messages.

Patch History:
===============================
V3:
-Rectified typo as suggested here:
 https://lkml.org/lkml/2020/10/9/902

V2: 
-Incorporated changes as suggested by Peter Kosgaard
 https://lkml.org/lkml/2020/10/8/663

V1: Base version



Sagar Shrikant Kadam (1):
  i2c: ocores: fix polling mode workaround on FU540-C000 SoC

 drivers/i2c/busses/i2c-ocores.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

-- 
2.7.4