| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <b8e18639-febf-9e3f-3525-7fb52a612727@collabora.com>
Date: Fri, 16 Oct 2020 15:11:22 -0300
From: Helen Koike <helen.koike@...labora.com>
To: Dafna Hirschfeld <dafna.hirschfeld@...labora.com>,
linux-media@...r.kernel.org
Cc: laurent.pinchart@...asonboard.com, hverkuil@...all.nl,
kernel@...labora.com, sakari.ailus@...ux.intel.com,
linux-rockchip@...ts.infradead.org, mchehab@...nel.org,
tfiga@...omium.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] media: staging: rkisp1: cap: refactor enable/disable
stream to allow multistreaming
On 10/16/20 11:28 AM, Dafna Hirschfeld wrote:
> Hi,
>
> Am 15.10.20 um 21:57 schrieb Helen Koike:
>> Allow streaming from self picture path and main picture path at the same
>> time.
>>
>> Take care for s_stream() callbacks to not be called twice.
>> When starting a stream, s_stream(true) shouldn't be called for the isp
>> and the sensor if the other stream is already enabled (since it was
>> already called).
>> When stopping a stream, s_stream(false) shouldn't be called for isp and
>> the sensor if the other stream is still enabled.
>>
>> Remove the callback function scheme for navigating through the topology,
>> simplifying the code, improving readability, while calling
>> media_pipeline_{start,stop}() in the right order.
>>
>> Remove multistreaming item from the TODO list.
>>
>> Signed-off-by: Helen Koike <helen.koike@...labora.com>
>>
>> ---
>> Hello,
>>
>> Since we didn't reach an agreement on the helpers in the core[1], I'm
>> sending this patch to fix this limitation only for rkisp1.
>>
>> [1] https://patchwork.linuxtv.org/project/linux-media/cover/20200415013044.1778572-1-helen.koike@collabora.com/
>>
>> If we decide to add the helpers in the future, we can clean up drivers
>> even more, but I don't want to block this feature.
>>
>> Overview of the patch:
>> ======================
>>
>> * Rename rkisp1_stream_{start,stop}() to
>> rkisp1_cap_stream_{enable,disable}() to clarify the difference between
>> other stream enable/disable functions
>>
>> * Implement rkisp1_pipeline_stream_{enable,disable}() to replace
>> rkisp1_pipeline_{enable,disable}_cb() and rkisp1_pipeline_sink_walk(),
>> which were removed.
>>
>> * Call rkisp1_cap_stream_{enable,disable}() from
>> rkisp1_pipeline_stream_{enable,disable}() for better
>> unwind handling and function name semantics.
>>
>> * Call media_pipeline_{start,stop}() in the right order.
>>
>> * Remove item from TODO list (I also reviewed the use of the
>> is_streaming var in the code and lgtm).
>>
>> This patch was tested on rockpi4 board with:
>> ============================================
>>
>> "media-ctl" "-d" "platform:rkisp1" "-r"
>> "media-ctl" "-d" "platform:rkisp1" "-l" "'imx219 4-0010':0 -> 'rkisp1_isp':0 [1]"
>> "media-ctl" "-d" "platform:rkisp1" "-l" "'rkisp1_isp':2 -> 'rkisp1_resizer_selfpath':0 [1]"
>> "media-ctl" "-d" "platform:rkisp1" "-l" "'rkisp1_isp':2 -> 'rkisp1_resizer_mainpath':0 [1]"
>>
>> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"imx219 4-0010":0 [fmt:SRGGB10_1X10/1640x1232]'
>>
>> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_isp":0 [fmt:SRGGB10_1X10/1640x1232 crop: (0,0)/1600x1200]'
>> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_isp":2 [fmt:YUYV8_2X8/1600x1200 crop: (0,0)/1500x1100]'
>>
>> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_selfpath":0 [fmt:YUYV8_2X8/1500x1100 crop: (300,400)/1400x1000]'
>> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_selfpath":1 [fmt:YUYV8_2X8/900x800]'
>>
>> "v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "-v" "width=900,height=800,"
>> "v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "-v" "pixelformat=422P"
>>
>> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_mainpath":0 [fmt:YUYV8_2X8/1500x1100 crop: (300,400)/1400x1000]'
>> "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_mainpath":1 [fmt:YUYV8_2X8/900x800]'
>>
>> "v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_mainpath" "-v" "width=900,height=800,"
>> "v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_mainpath" "-v" "pixelformat=422P"
>>
>> sleep 1
>>
>> time v4l2-ctl "-z" "platform:rkisp1" "-d" "rkisp1_mainpath" "--stream-mmap" "--stream-count" "100" &
>> time v4l2-ctl "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "--stream-mmap" "--stream-count" "100" &
>>
>> wait
>> echo "Completed"
>>
>> Thanks
>> Helen
>> ---
>> drivers/staging/media/rkisp1/TODO | 3 -
>> drivers/staging/media/rkisp1/rkisp1-capture.c | 227 +++++++++---------
>> 2 files changed, 113 insertions(+), 117 deletions(-)
>>
>> diff --git a/drivers/staging/media/rkisp1/TODO b/drivers/staging/media/rkisp1/TODO
>> index e7c8398fc2cef..a2dd0ad951c25 100644
>> --- a/drivers/staging/media/rkisp1/TODO
>> +++ b/drivers/staging/media/rkisp1/TODO
>> @@ -1,9 +1,6 @@
>> * Fix pad format size for statistics and parameters entities.
>> * Fix checkpatch errors.
>> * Add uapi docs. Remember to add documentation of how quantization is handled.
>> -* streaming paths (mainpath and selfpath) check if the other path is streaming
>> -in several places of the code, review this, specially that it doesn't seem it
>> -supports streaming from both paths at the same time.
>> NOTES:
>> * All v4l2-compliance test must pass.
>> diff --git a/drivers/staging/media/rkisp1/rkisp1-capture.c b/drivers/staging/media/rkisp1/rkisp1-capture.c
>> index b6f497ce3e95c..254936873c6c1 100644
>> --- a/drivers/staging/media/rkisp1/rkisp1-capture.c
>> +++ b/drivers/staging/media/rkisp1/rkisp1-capture.c
>> @@ -830,71 +830,43 @@ static void rkisp1_return_all_buffers(struct rkisp1_capture *cap,
>> }
>> /*
>> - * rkisp1_pipeline_sink_walk - Walk through the pipeline and call cb
>> - * @from: entity at which to start pipeline walk
>> - * @until: entity at which to stop pipeline walk
>> - *
>> - * Walk the entities chain starting at the pipeline video node and stop
>> - * all subdevices in the chain.
>> - *
>> - * If the until argument isn't NULL, stop the pipeline walk when reaching the
>> - * until entity. This is used to disable a partially started pipeline due to a
>> - * subdev start error.
>> + * Most of registers inside rockchip ISP1 have shadow register since
>> + * they must be not be changed during processing a frame.
>> + * Usually, each sub-module updates its shadow register after
>> + * processing the last pixel of a frame.
>> */
>> -static int rkisp1_pipeline_sink_walk(struct media_entity *from,
>> - struct media_entity *until,
>> - int (*cb)(struct media_entity *from,
>> - struct media_entity *curr))
>> +static void rkisp1_cap_stream_enable(struct rkisp1_capture *cap)
>> {
>> - struct media_entity *entity = from;
>> - struct media_pad *pad;
>> - unsigned int i;
>> - int ret;
>> -
>> - while (1) {
>> - pad = NULL;
>> - /* Find remote source pad */
>> - for (i = 0; i < entity->num_pads; i++) {
>> - struct media_pad *spad = &entity->pads[i];
>> -
>> - if (!(spad->flags & MEDIA_PAD_FL_SINK))
>> - continue;
>> - pad = media_entity_remote_pad(spad);
>> - if (pad && is_media_entity_v4l2_subdev(pad->entity))
>> - break;
>> - }
>> - if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
>> - break;
>> + struct rkisp1_device *rkisp1 = cap->rkisp1;
>> + struct rkisp1_capture *other = &rkisp1->capture_devs[cap->id ^ 1];
>> - entity = pad->entity;
>> - if (entity == until)
>> - break;
>> + cap->ops->set_data_path(cap);
>> + cap->ops->config(cap);
>> - ret = cb(from, entity);
>> - if (ret)
>> - return ret;
>> + /* Setup a buffer for the next frame */
>> + spin_lock_irq(&cap->buf.lock);
>> + rkisp1_set_next_buf(cap);
>> + cap->ops->enable(cap);
>> + /* It's safe to config ACTIVE and SHADOW regs for the
>> + * first stream. While when the second is starting, do NOT
>> + * force update because it also update the first one.
>> + *
>> + * The latter case would drop one more buf(that is 2) since
>> + * there's not buf in shadow when the second FE received. This's
>> + * also required because the second FE maybe corrupt especially
>> + * when run at 120fps.
>> + */
>> + if (!other->is_streaming) {
>> + /* force cfg update */
>> + rkisp1_write(rkisp1,
>> + RKISP1_CIF_MI_INIT_SOFT_UPD, RKISP1_CIF_MI_INIT);
>> + rkisp1_set_next_buf(cap);
>> }
>> -
>> - return 0;
>> -}
>> -
>> -static int rkisp1_pipeline_disable_cb(struct media_entity *from,
>> - struct media_entity *curr)
>> -{
>> - struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(curr);
>> -
>> - return v4l2_subdev_call(sd, video, s_stream, false);
>> -}
>> -
>> -static int rkisp1_pipeline_enable_cb(struct media_entity *from,
>> - struct media_entity *curr)
>> -{
>> - struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(curr);
>> -
>> - return v4l2_subdev_call(sd, video, s_stream, true);
>> + spin_unlock_irq(&cap->buf.lock);
>> + cap->is_streaming = true;
>> }
>> -static void rkisp1_stream_stop(struct rkisp1_capture *cap)
>> +static void rkisp1_cap_stream_disable(struct rkisp1_capture *cap)
>> {
>> int ret;
>> @@ -911,6 +883,81 @@ static void rkisp1_stream_stop(struct rkisp1_capture *cap)
>> }
>> }
>> +/*
>> + * rkisp1_pipeline_stream_disable - disable nodes in the pipeline
>> + *
>> + * Call s_stream(false) in the reverse order from
>> + * rkisp1_pipeline_stream_enable() and disable the DMA engine.
>> + * Should be called before media_pipeline_stop()
>> + */
>> +static void rkisp1_pipeline_stream_disable(struct rkisp1_capture *cap)
>> + __must_hold(&cap->rkisp1->stream_lock)
>> +{
>> + struct rkisp1_device *rkisp1 = cap->rkisp1;
>> +
>> + rkisp1_cap_stream_disable(cap);
>> +
>> + /*
>> + * If the other capture is streaming, isp and sensor nodes shouldn't
>> + * be disabled, skip them.
>> + */
>> + if (rkisp1->pipe.streaming_count < 2) {
>> + v4l2_subdev_call(rkisp1->active_sensor->sd, video, s_stream,
>> + false);
>> + v4l2_subdev_call(&rkisp1->isp.sd, video, s_stream, false);
>> + }
>> +
>> + v4l2_subdev_call(&rkisp1->resizer_devs[cap->id].sd, video, s_stream,
>> + false);
>
> I wonder if the order of the disable matters. If it should be from the sensor up to the
> capture then we should call 'rkisp1_cap_stream_disable' at the end of this
> function.
>
>> +}
>> +
>> +/*
>> + * rkisp1_pipeline_stream_enable - enable nodes in the pipeline
>> + *
>> + * Enable the DMA Engine and call s_stream(true) through the pipeline.
>> + * Should be called after media_pipeline_start()
>> + */
>> +static int rkisp1_pipeline_stream_enable(struct rkisp1_capture *cap)
>> + __must_hold(&cap->rkisp1->stream_lock)
>> +{
>> + struct rkisp1_device *rkisp1 = cap->rkisp1;
>> + int ret;
>> +
>> + rkisp1_cap_stream_enable(cap);
>> +
>> + ret = v4l2_subdev_call(&rkisp1->resizer_devs[cap->id].sd, video,
>> + s_stream, true);
>> + if (ret)
>> + return ret;
>
> In case of error here, shouldn't we call 'rkisp1_cap_stream_disable'?
Yes, thanks for catching it :)
>
>> +
>> + /*
>> + * If the other capture is streaming, isp and sensor nodes are already
>> + * enabled, skip them.
>> + */
>> + if (rkisp1->pipe.streaming_count > 1)
>> + return 0;
>> +
>> + ret = v4l2_subdev_call(&rkisp1->isp.sd, video, s_stream, true);
>> + if (ret)
>> + goto err_disable_rsz;
>> +
>> + ret = v4l2_subdev_call(rkisp1->active_sensor->sd, video, s_stream,
>> + true);
>> + if (ret)
>> + goto err_disable_isp;
>> +
>> + return 0;
>> +
>> +err_disable_isp:
>> + v4l2_subdev_call(&rkisp1->isp.sd, video, s_stream, false);
>> +err_disable_rsz:
>> + v4l2_subdev_call(&rkisp1->resizer_devs[cap->id].sd, video, s_stream,
>> + false);
>> + rkisp1_cap_stream_disable(cap);
>> +
>> + return ret;
>> +}
>> +
>> static void rkisp1_vb2_stop_streaming(struct vb2_queue *queue)
>> {
>> struct rkisp1_capture *cap = queue->drv_priv;
>> @@ -920,13 +967,8 @@ static void rkisp1_vb2_stop_streaming(struct vb2_queue *queue)
>> mutex_lock(&cap->rkisp1->stream_lock);
>> - rkisp1_stream_stop(cap);
>> + rkisp1_pipeline_stream_disable(cap);
>> media_pipeline_stop(&node->vdev.entity);
>> - ret = rkisp1_pipeline_sink_walk(&node->vdev.entity, NULL,
>> - rkisp1_pipeline_disable_cb);
>> - if (ret)
>> - dev_err(rkisp1->dev,
>> - "pipeline stream-off failed error:%d\n", ret);
>> rkisp1_return_all_buffers(cap, VB2_BUF_STATE_ERROR);
>> @@ -940,43 +982,6 @@ static void rkisp1_vb2_stop_streaming(struct vb2_queue *queue)
>> mutex_unlock(&cap->rkisp1->stream_lock);
>> }
>> -/*
>> - * Most of registers inside rockchip ISP1 have shadow register since
>> - * they must be not be changed during processing a frame.
>> - * Usually, each sub-module updates its shadow register after
>> - * processing the last pixel of a frame.
>> - */
>> -static void rkisp1_stream_start(struct rkisp1_capture *cap)
>> -{
>> - struct rkisp1_device *rkisp1 = cap->rkisp1;
>> - struct rkisp1_capture *other = &rkisp1->capture_devs[cap->id ^ 1];
>> -
>> - cap->ops->set_data_path(cap);
>> - cap->ops->config(cap);
>> -
>> - /* Setup a buffer for the next frame */
>> - spin_lock_irq(&cap->buf.lock);
>> - rkisp1_set_next_buf(cap);
>> - cap->ops->enable(cap);
>> - /* It's safe to config ACTIVE and SHADOW regs for the
>> - * first stream. While when the second is starting, do NOT
>> - * force update because it also update the first one.
>> - *
>> - * The latter case would drop one more buf(that is 2) since
>> - * there's not buf in shadow when the second FE received. This's
>> - * also required because the second FE maybe corrupt especially
>> - * when run at 120fps.
>> - */
>> - if (!other->is_streaming) {
>> - /* force cfg update */
>> - rkisp1_write(rkisp1,
>> - RKISP1_CIF_MI_INIT_SOFT_UPD, RKISP1_CIF_MI_INIT);
>> - rkisp1_set_next_buf(cap);
>> - }
>> - spin_unlock_irq(&cap->buf.lock);
>> - cap->is_streaming = true;
>> -}
>> -
>> static int
>> rkisp1_vb2_start_streaming(struct vb2_queue *queue, unsigned int count)
>> {
>> @@ -1001,28 +1006,22 @@ rkisp1_vb2_start_streaming(struct vb2_queue *queue, unsigned int count)
>> goto err_pipe_pm_put;
>> }
>>
>
> The previous code with the 'rkisp1_pipeline_sink_walk' only followed enabled links.
> We should probably first check if the link between the resizer and the isp is enabled
> and also between the isp to the sensor. and return -EPIPE if not.
Very good point, yes, I'll fix this in v2.
> Actually I think that the code that set the 'active_sensor' (callingrkisp1_get_remote_sensor)
> should move to here since this also check if the link to the sensor is enabled.
ok
Thanks for your review
Helen
>
> Thanks,
> Dafna
>
>> - rkisp1_stream_start(cap);
>> -
>> - /* start sub-devices */
>> - ret = rkisp1_pipeline_sink_walk(entity, NULL,
>> - rkisp1_pipeline_enable_cb);
>> - if (ret)
>> - goto err_stop_stream;
>> -
>> ret = media_pipeline_start(entity, &cap->rkisp1->pipe);
>> if (ret) {
>> dev_err(cap->rkisp1->dev, "start pipeline failed %d\n", ret);
>> - goto err_pipe_disable;
>> + goto err_v4l2_pm_put;
>> }
>> + ret = rkisp1_pipeline_stream_enable(cap);
>> + if (ret)
>> + goto err_media_pipeline_stop;
>> mutex_unlock(&cap->rkisp1->stream_lock);
>> return 0;
>> -err_pipe_disable:
>> - rkisp1_pipeline_sink_walk(entity, NULL, rkisp1_pipeline_disable_cb);
>> -err_stop_stream:
>> - rkisp1_stream_stop(cap);
>> +err_media_pipeline_stop:
>> + media_pipeline_stop(entity);
>> +err_v4l2_pm_put:
>> v4l2_pipeline_pm_put(entity);
>> err_pipe_pm_put:
>> pm_runtime_put(cap->rkisp1->dev);
>>
Powered by blists - more mailing lists