lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20201016190821.GC1345100@ravnborg.org>
Date:   Fri, 16 Oct 2020 21:08:21 +0200
From:   Sam Ravnborg <sam@...nborg.org>
To:     Kevin Tang <kevin3.tang@...il.com>
Cc:     maarten.lankhorst@...ux.intel.com, mripard@...nel.org,
        sean@...rly.run, airlied@...ux.ie, daniel@...ll.ch,
        robh+dt@...nel.org, mark.rutland@....com, orsonzhai@...il.com,
        linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
        zhang.lyra@...il.com
Subject: Re: [PATCH RFC v7 0/6] Add Unisoc's drm kms module

Hi Kevin,

> v7:
> 1. Fix DTC unit name warnings
> 2. Fix the problem of maintainers
> 3. Call drmm_mode_config_init to mode config init
> 4. Embed drm_device in sprd_drm and use devm_drm_dev_alloc
> 5. Replace DRM_XXX with drm_xxx on KMS module, but not suitable for other subsystems
> 6. Remove plane_update stuff, dpu handles all the HW update in crtc->atomic_flush
> 7. Dsi&Dphy Code structure adjustment, all move to "sprd/"

I can see some of my feedback from last round of review is not
addressed. There were makefile fixes and then I asked for a high-level
intro.

Can you please revisit last round of review feedback to check what was
missed.

	Sam


> 
> Kevin Tang (6):
>   dt-bindings: display: add Unisoc's drm master bindings
>   drm/sprd: add Unisoc's drm kms master
>   dt-bindings: display: add Unisoc's dpu bindings
>   drm/sprd: add Unisoc's drm display controller driver
>   dt-bindings: display: add Unisoc's mipi dsi&dphy bindings
>   drm/sprd: add Unisoc's drm mipi dsi&dphy driver
> 
>  .../display/sprd/sprd,display-subsystem.yaml       |   39 +
>  .../bindings/display/sprd/sprd,sharkl3-dpu.yaml    |   83 ++
>  .../display/sprd/sprd,sharkl3-dsi-host.yaml        |   98 ++
>  .../display/sprd/sprd,sharkl3-dsi-phy.yaml         |   75 +
>  drivers/gpu/drm/Kconfig                            |    2 +
>  drivers/gpu/drm/Makefile                           |    1 +
>  drivers/gpu/drm/sprd/Kconfig                       |   13 +
>  drivers/gpu/drm/sprd/Makefile                      |   12 +
>  drivers/gpu/drm/sprd/dpu_r2p0.c                    |  636 +++++++++
>  drivers/gpu/drm/sprd/dw_dsi_ctrl.c                 |  792 +++++++++++
>  drivers/gpu/drm/sprd/dw_dsi_ctrl.h                 | 1475 ++++++++++++++++++++
>  drivers/gpu/drm/sprd/dw_dsi_ctrl_ppi.c             |  276 ++++
>  drivers/gpu/drm/sprd/dw_dsi_ctrl_ppi.h             |   34 +
>  drivers/gpu/drm/sprd/megacores_pll.c               |  315 +++++
>  drivers/gpu/drm/sprd/megacores_pll.h               |  146 ++
>  drivers/gpu/drm/sprd/sprd_dphy.c                   |  335 +++++
>  drivers/gpu/drm/sprd/sprd_dphy.h                   |   39 +
>  drivers/gpu/drm/sprd/sprd_dpu.c                    |  501 +++++++
>  drivers/gpu/drm/sprd/sprd_dpu.h                    |  217 +++
>  drivers/gpu/drm/sprd/sprd_drm.c                    |  263 ++++
>  drivers/gpu/drm/sprd/sprd_drm.h                    |   20 +
>  drivers/gpu/drm/sprd/sprd_dsi.c                    | 1102 +++++++++++++++
>  drivers/gpu/drm/sprd/sprd_dsi.h                    |  105 ++
>  23 files changed, 6579 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-phy.yaml
>  create mode 100644 drivers/gpu/drm/sprd/Kconfig
>  create mode 100644 drivers/gpu/drm/sprd/Makefile
>  create mode 100644 drivers/gpu/drm/sprd/dpu_r2p0.c
>  create mode 100644 drivers/gpu/drm/sprd/dw_dsi_ctrl.c
>  create mode 100644 drivers/gpu/drm/sprd/dw_dsi_ctrl.h
>  create mode 100644 drivers/gpu/drm/sprd/dw_dsi_ctrl_ppi.c
>  create mode 100644 drivers/gpu/drm/sprd/dw_dsi_ctrl_ppi.h
>  create mode 100644 drivers/gpu/drm/sprd/megacores_pll.c
>  create mode 100644 drivers/gpu/drm/sprd/megacores_pll.h
>  create mode 100644 drivers/gpu/drm/sprd/sprd_dphy.c
>  create mode 100644 drivers/gpu/drm/sprd/sprd_dphy.h
>  create mode 100644 drivers/gpu/drm/sprd/sprd_dpu.c
>  create mode 100644 drivers/gpu/drm/sprd/sprd_dpu.h
>  create mode 100644 drivers/gpu/drm/sprd/sprd_drm.c
>  create mode 100644 drivers/gpu/drm/sprd/sprd_drm.h
>  create mode 100644 drivers/gpu/drm/sprd/sprd_dsi.c
>  create mode 100644 drivers/gpu/drm/sprd/sprd_dsi.h
> 
> -- 
> 2.7.4
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@...ts.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ