| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201018125237.16717-3-kholk11@gmail.com>
Date: Sun, 18 Oct 2020 14:52:33 +0200
From: kholk11@...il.com
To: todor.too@...il.com
Cc: agross@...nel.org, bjorn.andersson@...aro.org, mchehab@...nel.org,
robh+dt@...nel.org, marijns95@...il.com, konradybcio@...il.com,
martin.botka1@...il.com, linux-arm-msm@...r.kernel.org,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
AngeloGioacchino Del Regno <kholk11@...il.com>
Subject: [PATCH 2/6] media: camss: ispif: Correctly reset based on the VFE ID
From: AngeloGioacchino Del Regno <kholk11@...il.com>
Resetting the ISPIF VFE0 context is wrong if we are using the VFE1
for dual-camera or simply because a secondary camera is connected
to it: in this case the reset will always happen on the VFE0 ctx
of the ISPIF, which is .. useless.
Fix this usecase by adding the ISPIF_RST_CMD_1 address and choose
where to do the (or what to) reset based on the VFE line id.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@...il.com>
---
.../media/platform/qcom/camss/camss-ispif.c | 87 ++++++++++++-------
.../media/platform/qcom/camss/camss-ispif.h | 2 +-
2 files changed, 57 insertions(+), 32 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-ispif.c b/drivers/media/platform/qcom/camss/camss-ispif.c
index db94cfd6c508..252db6b33dab 100644
--- a/drivers/media/platform/qcom/camss/camss-ispif.c
+++ b/drivers/media/platform/qcom/camss/camss-ispif.c
@@ -26,6 +26,7 @@
#define MSM_ISPIF_NAME "msm_ispif"
#define ISPIF_RST_CMD_0 0x008
+#define ISPIF_RST_CMD_1 0x00c
#define ISPIF_RST_CMD_0_STROBED_RST_EN (1 << 0)
#define ISPIF_RST_CMD_0_MISC_LOGIC_RST (1 << 1)
#define ISPIF_RST_CMD_0_SW_REG_RST (1 << 2)
@@ -179,7 +180,10 @@ static irqreturn_t ispif_isr_8x96(int irq, void *dev)
writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
if ((value0 >> 27) & 0x1)
- complete(&ispif->reset_complete);
+ complete(&ispif->reset_complete[0]);
+
+ if ((value3 >> 27) & 0x1)
+ complete(&ispif->reset_complete[1]);
if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
@@ -237,7 +241,7 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev)
writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
if ((value0 >> 27) & 0x1)
- complete(&ispif->reset_complete);
+ complete(&ispif->reset_complete[0]);
if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
@@ -257,33 +261,17 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev)
return IRQ_HANDLED;
}
-/*
- * ispif_reset - Trigger reset on ISPIF module and wait to complete
- * @ispif: ISPIF device
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int ispif_reset(struct ispif_device *ispif)
+static int ispif_vfe_reset(struct ispif_device *ispif, u8 vfe_id)
{
- unsigned long time;
u32 val;
- int ret;
-
- ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0);
- if (ret < 0)
- return ret;
- ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1);
- if (ret < 0)
- return ret;
-
- ret = camss_enable_clocks(ispif->nclocks_for_reset,
- ispif->clock_for_reset,
- to_device(ispif));
- if (ret < 0)
- return ret;
+ if (vfe_id > (to_camss(ispif)->vfe_num - 1)) {
+ dev_err(to_device(ispif),
+ "Error: asked reset for invalid VFE%d\n", vfe_id);
+ return -ENOENT;
+ }
- reinit_completion(&ispif->reset_complete);
+ reinit_completion(&ispif->reset_complete[vfe_id]);
val = ISPIF_RST_CMD_0_STROBED_RST_EN |
ISPIF_RST_CMD_0_MISC_LOGIC_RST |
@@ -303,15 +291,51 @@ static int ispif_reset(struct ispif_device *ispif)
ISPIF_RST_CMD_0_RDI_OUTPUT_1_MISR_RST |
ISPIF_RST_CMD_0_RDI_OUTPUT_2_MISR_RST;
- writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0);
+ if (vfe_id == 1)
+ writel_relaxed(val, ispif->base + ISPIF_RST_CMD_1);
+ else
+ writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0);
- time = wait_for_completion_timeout(&ispif->reset_complete,
+ time = wait_for_completion_timeout(&ispif->reset_complete[vfe_id],
msecs_to_jiffies(ISPIF_RESET_TIMEOUT_MS));
if (!time) {
- dev_err(to_device(ispif), "ISPIF reset timeout\n");
- ret = -EIO;
+ dev_err(to_device(ispif),
+ "ISPIF for VFE%d reset timeout\n", vfe_id);
+ return -EIO;
}
+ return 0;
+}
+
+/*
+ * ispif_reset - Trigger reset on ISPIF module and wait to complete
+ * @ispif: ISPIF device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int ispif_reset(struct ispif_device *ispif, u8 vfe_id)
+{
+ unsigned long time;
+ int ret;
+
+ ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0);
+ if (ret < 0)
+ return ret;
+
+ ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1);
+ if (ret < 0)
+ return ret;
+
+ ret = camss_enable_clocks(ispif->nclocks_for_reset,
+ ispif->clock_for_reset,
+ to_device(ispif));
+ if (ret < 0)
+ return ret;
+
+ ret = ispif_vfe_reset(ispif, vfe_id);
+ if (ret)
+ dev_dbg(to_device(ispif), "ISPIF Reset failed\n");
+
camss_disable_clocks(ispif->nclocks_for_reset, ispif->clock_for_reset);
camss_pm_domain_off(to_camss(ispif), PM_DOMAIN_VFE0);
@@ -355,7 +379,7 @@ static int ispif_set_power(struct v4l2_subdev *sd, int on)
goto exit;
}
- ret = ispif_reset(ispif);
+ ret = ispif_reset(ispif, line->vfe_id);
if (ret < 0) {
pm_runtime_put_sync(dev);
camss_disable_clocks(ispif->nclocks, ispif->clock);
@@ -1192,7 +1216,8 @@ int msm_ispif_subdev_init(struct ispif_device *ispif,
mutex_init(&ispif->config_lock);
- init_completion(&ispif->reset_complete);
+ for (i = 0; i < MSM_ISPIF_VFE_NUM; i++)
+ init_completion(&ispif->reset_complete[i]);
return 0;
}
diff --git a/drivers/media/platform/qcom/camss/camss-ispif.h b/drivers/media/platform/qcom/camss/camss-ispif.h
index 1a5ba2425a42..4132174f7ea1 100644
--- a/drivers/media/platform/qcom/camss/camss-ispif.h
+++ b/drivers/media/platform/qcom/camss/camss-ispif.h
@@ -56,7 +56,7 @@ struct ispif_device {
int nclocks;
struct camss_clock *clock_for_reset;
int nclocks_for_reset;
- struct completion reset_complete;
+ struct completion reset_complete[MSM_ISPIF_VFE_NUM];
int power_count;
struct mutex power_lock;
struct ispif_intf_cmd_reg intf_cmd[MSM_ISPIF_VFE_NUM];
--
2.28.0
Powered by blists - more mailing lists