| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <AM6PR04MB496668D6EE3D07C78C5FE77E80010@AM6PR04MB4966.eurprd04.prod.outlook.com>
Date: Sun, 18 Oct 2020 05:21:28 +0000
From: Aisheng Dong <aisheng.dong@....com>
To: Shawn Guo <shawnguo@...nel.org>,
"Franck Lenormand (OSS)" <franck.lenormand@....nxp.com>,
Arnd Bergmann <arnd@...db.de>
CC: "s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"festevam@...il.com" <festevam@...il.com>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
dl-linux-imx <linux-imx@....com>, Abel Vesa <abel.vesa@....com>,
Anson Huang <anson.huang@....com>,
"linux@...pel-privat.de" <linux@...pel-privat.de>,
Leonard Crestez <leonard.crestez@....com>,
Daniel Baluta <daniel.baluta@....com>,
Joakim Zhang <qiangqing.zhang@....com>,
Peng Fan <peng.fan@....com>,
"linux-edac@...r.kernel.org" <linux-edac@...r.kernel.org>,
"mchehab@...nel.org" <mchehab@...nel.org>,
Borislav Petkov <bp@...en8.de>,
"tony.luck@...el.com" <tony.luck@...el.com>
Subject: RE: [PATCH v2 5/5] soc: imx8: Add the SC SECVIO driver
> From: Shawn Guo <shawnguo@...nel.org>
> Sent: Wednesday, August 19, 2020 9:32 PM
> >
> > The SNVS is a hardware component in the imx8 SoC. One of its function
> > is to detect hardware attacks, in which case it creates a SECurity
> > VIOlation.
> >
> > This patch adds the support for the reception of these secvio and
> > report it to the audit framework.
> >
> > It also gives the possibility to perform custom processing when a
> > secvio is detected.
> >
> > Signed-off-by: Franck LENORMAND <franck.lenormand@....nxp.com>
> > Reported-by: kernel test robot <lkp@...el.com>
> > ---
> > drivers/soc/imx/Kconfig | 10 +
> > drivers/soc/imx/Makefile | 1 +
> > drivers/soc/imx/secvio/Kconfig | 10 +
> > drivers/soc/imx/secvio/Makefile | 3 +
> > drivers/soc/imx/secvio/imx-secvio-audit.c | 39 ++
> > drivers/soc/imx/secvio/imx-secvio-debugfs.c | 379 ++++++++++++
> > drivers/soc/imx/secvio/imx-secvio-sc-int.h | 84 +++
> > drivers/soc/imx/secvio/imx-secvio-sc.c | 858
> ++++++++++++++++++++++++++++
> > include/soc/imx/imx-secvio-sc.h | 177 ++++++
> > 9 files changed, 1561 insertions(+)
> > create mode 100644 drivers/soc/imx/secvio/Kconfig create mode 100644
> > drivers/soc/imx/secvio/Makefile create mode 100644
> > drivers/soc/imx/secvio/imx-secvio-audit.c
> > create mode 100644 drivers/soc/imx/secvio/imx-secvio-debugfs.c
> > create mode 100644 drivers/soc/imx/secvio/imx-secvio-sc-int.h
> > create mode 100644 drivers/soc/imx/secvio/imx-secvio-sc.c
> > create mode 100644 include/soc/imx/imx-secvio-sc.h
>
> Hi Arnd,
>
> Do we have any subsystem to accommodate this driver? Or 'soc' is just the
> right place for it?
>
Not sure if EDAC could be a better place.
e.g.
drivers/edac/sifive_edac.c
If not, maybe we can put in 'soc' first.
Regards
Aisheng
> Shawn
>
> >
> > diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig index
> > a9370f4..6c1bc78 100644
> > --- a/drivers/soc/imx/Kconfig
> > +++ b/drivers/soc/imx/Kconfig
> > @@ -19,4 +19,14 @@ config SOC_IMX8M
> > support, it will provide the SoC info like SoC family,
> > ID and revision etc.
> >
> > +config SECVIO_SC
> > + tristate "NXP SC secvio support"
> > + depends on IMX_SCU
> > + help
> > + If you say yes here you get support for the NXP SNVS security
> > + violation module. It includes the possibility to read information
> > + related to security violations and tampers. It also gives the
> > + possibility to register user callbacks when a security violation
> > + occurs.
> > +
> > endmenu
> > diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile index
> > 078dc91..c91a499 100644
> > --- a/drivers/soc/imx/Makefile
> > +++ b/drivers/soc/imx/Makefile
> > @@ -5,3 +5,4 @@ endif
> > obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
> > obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
> > obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
> > +obj-${CONFIG_SECVIO_SC} += secvio/
> > diff --git a/drivers/soc/imx/secvio/Kconfig
> > b/drivers/soc/imx/secvio/Kconfig new file mode 100644 index
> > 0000000..dcfaea5
> > --- /dev/null
> > +++ b/drivers/soc/imx/secvio/Kconfig
> > @@ -0,0 +1,10 @@
> > +config SECVIO_SC
> > + tristate "NXP SC secvio support"
> > + depends on IMX_SCU
> > + help
> > + If you say yes here you get support for the NXP SNVS security
> > + violation module. It includes the possibility to read information
> > + related to security violations and tampers. It also gives the
> > + possibility to register user callbacks when a security violation
> > + occurs.
> > +
> > diff --git a/drivers/soc/imx/secvio/Makefile
> > b/drivers/soc/imx/secvio/Makefile new file mode 100644 index
> > 0000000..d5a89ba
> > --- /dev/null
> > +++ b/drivers/soc/imx/secvio/Makefile
> > @@ -0,0 +1,3 @@
> > +obj-y += imx-secvio-sc.o
> > +obj-$(CONFIG_DEBUG_FS) += imx-secvio-debugfs.o
> > +obj-$(CONFIG_AUDIT) += imx-secvio-audit.o
> > diff --git a/drivers/soc/imx/secvio/imx-secvio-audit.c
> > b/drivers/soc/imx/secvio/imx-secvio-audit.c
> > new file mode 100644
> > index 0000000..dc96e16
> > --- /dev/null
> > +++ b/drivers/soc/imx/secvio/imx-secvio-audit.c
> > @@ -0,0 +1,39 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright 2019-2020 NXP
> > + */
> > +
> > +#include <linux/audit.h>
> > +
> > +#include <soc/imx/imx-secvio-sc.h>
> > +
> > +/**
> > + * report_to_audit_notify() - Report secvio and tamper status to
> > +audit FW
> > + *
> > + * This function can be chained in a notifier list
> > + *
> > + * @nb: notifier block
> > + * @status: error code
> > + * @notif_info: Pointer on secvio_sc_notifier_info structure
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +int report_to_audit_notify(struct notifier_block *nb, unsigned long status,
> > + void *notif_info)
> > +{
> > + struct audit_buffer *ab;
> > + struct secvio_sc_notifier_info *info = notif_info;
> > +
> > + ab = audit_log_start(audit_context(), GFP_KERNEL,
> AUDIT_INTEGRITY_RULE);
> > + if (!ab)
> > + return -ENOMEM;
> > +
> > + audit_log_format(ab, " hpsvs=0x%.08x lps=0x%.08x lptds=0x%.08x",
> > + info->hpsvs, info->lps, info->lptds);
> > + audit_log_task_info(ab);
> > + audit_log_end(ab);
> > +
> > + return 0;
> > +}
> > diff --git a/drivers/soc/imx/secvio/imx-secvio-debugfs.c
> > b/drivers/soc/imx/secvio/imx-secvio-debugfs.c
> > new file mode 100644
> > index 0000000..bcbd77a
> > --- /dev/null
> > +++ b/drivers/soc/imx/secvio/imx-secvio-debugfs.c
> > @@ -0,0 +1,379 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright 2019-2020 NXP
> > + */
> > +
> > +/*
> > + * The module exposes 3 files in debugfs:
> > + * - secvio/info:
> > + * * Read: It returns the value of the fuses and SNVS registers which are
> > + * readable and related to secvio and tampers
> > + * * Write: A write of the format "<hex id> [<hex value 0> <hex value 1>
> > + * <hex value 2> <hex value 3> <hex value 4>](<nb values>)"
> > + * will write the SNVS register having the provided id with
> the
> > + * values provided (cf SECO documentation)
> > + * - secvio/enable: State of the IRQ
> > + * - secvio/check: Check the state of the security violation and tampers
> > + * and calls notifier
> > + * - secvio/clear: Clear the state of all secvio and tampers */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/device.h>
> > +#include <linux/debugfs.h>
> > +#include <linux/uaccess.h>
> > +#include <linux/nvmem-consumer.h>
> > +
> > +#include <linux/firmware/imx/svc/misc.h> #include
> > +<linux/firmware/imx/svc/seco.h>
> > +
> > +#include <soc/imx/imx-secvio-sc.h>
> > +#include "imx-secvio-sc-int.h"
> > +
> > +/**
> > + * fuse_reader() - Read a set of fuse
> > + *
> > + * @dev: secvio device
> > + * @id: offset of the fuse
> > + * @value: array of values read
> > + * @mul: number of fuse to read
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +static int fuse_reader(struct device *dev, u32 id, u32 *value, u8
> > +mul) {
> > + struct imx_secvio_sc_data *data = dev_get_drvdata(dev);
> > + u32 size_to_read = mul * sizeof(u32);
> > + int ret;
> > +
> > + ret = nvmem_device_read(data->nvmem, id, size_to_read, value);
> > + if (ret < 0) {
> > + dev_err(data->dev, "Failed to read fuse %d: %d\n", id, ret);
> > + return ret;
> > + }
> > +
> > + if (ret != size_to_read) {
> > + dev_err(data->dev, "Read only %d instead of %d\n", ret,
> > + size_to_read);
> > + return -ENOMEM;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * snvs_reader() - Read a set of SNVS register
> > + *
> > + * @dev: secvio device
> > + * @id: offset of the register
> > + * @value: array of values read
> > + * @mul: number of registers to read
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +static int snvs_reader(struct device *dev, u32 id, u32 *value, u8
> > +mul) {
> > + int ret;
> > + u32 *v1, *v2, *v3, *v4, *v5;
> > +
> > + v1 = NULL;
> > + v2 = NULL;
> > + v3 = NULL;
> > + v4 = NULL;
> > + v5 = NULL;
> > +
> > + switch (mul) {
> > + case 5:
> > + v5 = &value[4];
> > + fallthrough;
> > + case 4:
> > + v4 = &value[3];
> > + fallthrough;
> > + case 3:
> > + v3 = &value[2];
> > + fallthrough;
> > + case 2:
> > + v2 = &value[1];
> > + fallthrough;
> > + case 1:
> > + v1 = &value[0];
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + ret = call_secvio_config(dev, id, SECVIO_CONFIG_READ, v1, v2, v3, v4,
> > + v5, mul);
> > + if (ret < 0)
> > + dev_err(dev, "Failed to read snvs reg %d: %d\n", id, ret);
> > +
> > + return ret;
> > +}
> > +
> > +/**
> > + * snvs_dgo_reader() - Read a set of DGO register
> > + *
> > + * @dev: secvio device
> > + * @id: offset of the register
> > + * @value: array of values read
> > + * @mul: number of registers to read
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +static int snvs_dgo_reader(struct device *dev, u32 id, u32 *value, u8
> > +mul) {
> > + struct imx_secvio_sc_data *data = dev_get_drvdata(dev);
> > + int ret;
> > +
> > + /* We check that we only have 1 register to read */
> > + if (mul != 1)
> > + return -EINVAL;
> > +
> > + ret = imx_sc_seco_secvio_dgo_config(data->ipc_handle, id,
> > + SECVIO_CONFIG_READ, value);
> > + if (ret)
> > + dev_err(dev, "Failed to read snvs dgo reg %d: %d\n", id, ret);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct imx_secvio_info_entry {
> > + int (*reader)(struct device *dev, u32 id, u32 *value, u8 mul);
> > + const char *type;
> > + const char *name;
> > + u32 id;
> > + u8 mul;
> > +} gs_imx_secvio_info_list[] = {
> > + {fuse_reader, "fuse", "trim", 30, 1},
> > + {fuse_reader, "fuse", "trim2", 31, 1},
> > + {fuse_reader, "fuse", "ctrim1", 260, 1},
> > + {fuse_reader, "fuse", "ctrim2", 261, 1},
> > + {fuse_reader, "fuse", "ctrim3", 262, 1},
> > + {fuse_reader, "fuse", "ctrim4", 263, 1},
> > + {fuse_reader, "fuse", "OSC_CAP", 768, 1},
> > +
> > + {snvs_reader, "snvs", "HPLR", 0x0, 1},
> > + {snvs_reader, "snvs", "LPLR", 0x34, 1},
> > + {snvs_reader, "snvs", "HPSICR", 0xc, 1},
> > + {snvs_reader, "snvs", "HPSVCR", 0x10, 1},
> > + {snvs_reader, "snvs", "HPSVS", 0x18, 1},
> > + {snvs_reader, "snvs", "LPSVC", 0x40, 1},
> > + {snvs_reader, "snvs", "LPTDC", 0x48, 2},
> > + {snvs_reader, "snvs", "LPSR", 0x4c, 1},
> > + {snvs_reader, "snvs", "LPTDS", 0xa4, 1},
> > + {snvs_reader, "snvs", "LPTGFC", 0x44, 3},
> > + {snvs_reader, "snvs", "LPATCTL", 0xe0, 1},
> > + {snvs_reader, "snvs", "LPATCLK", 0xe4, 1},
> > + {snvs_reader, "snvs", "LPATRC1", 0xe8, 2},
> > + {snvs_reader, "snvs", "LPMKC", 0x3c, 1},
> > + {snvs_reader, "snvs", "LPSMC", 0x5c, 2},
> > + {snvs_reader, "snvs", "LPPGD", 0x64, 1},
> > + {snvs_reader, "snvs", "HPVID", 0xf8, 2},
> > +
> > + {snvs_dgo_reader, "dgo", "Offset", 0x0, 1},
> > + {snvs_dgo_reader, "dgo", "PUP/PD", 0x10, 1},
> > + {snvs_dgo_reader, "dgo", "Anatest", 0x20, 1},
> > + {snvs_dgo_reader, "dgo", "T trim", 0x30, 1},
> > + {snvs_dgo_reader, "dgo", "Misc", 0x40, 1},
> > + {snvs_dgo_reader, "dgo", "Vmon", 0x50, 1},
> > +};
> > +
> > +struct imx_secvio_sc_info_seq_data {
> > + struct device *dev;
> > + const struct imx_secvio_info_entry *list;
> > + int size;
> > +};
> > +
> > +/**
> > + * imx_secvio_sc_info_seq_start() - Start sequence
> > + *
> > + * @m: seq file
> > + * @pos: position in the sequence
> > + *
> > + * Return pointer on position
> > + */
> > +static void *imx_secvio_sc_info_seq_start(struct seq_file *m, loff_t
> > +*pos) {
> > + struct imx_secvio_sc_info_seq_data *data = m->private;
> > +
> > + /* Check we are not out of bound */
> > + if (*pos >= data->size)
> > + return NULL;
> > +
> > + return (void *)pos;
> > +}
> > +
> > +/**
> > + * imx_secvio_sc_info_seq_next() - Iterate sequence
> > + *
> > + * @m: seq file
> > + * @v: pointer
> > + * @pos: position in the sequence
> > + *
> > + * Return pointer on position
> > + */
> > +static void *imx_secvio_sc_info_seq_next(struct seq_file *m, void *v,
> > +loff_t *pos) {
> > + /* Increment the counter */
> > + ++*pos;
> > +
> > + /* call the start function which will check the index */
> > + return imx_secvio_sc_info_seq_start(m, pos); }
> > +
> > +/**
> > + * imx_secvio_sc_info_seq_stop() - Stop sequence
> > + *
> > + * @m: seq file
> > + * @v: pointer
> > + */
> > +static void imx_secvio_sc_info_seq_stop(struct seq_file *m, void *v)
> > +{ }
> > +
> > +/**
> > + * imx_secvio_sc_info_seq_show() - Show the item in the sequence
> > + *
> > + * @m: seq file
> > + * @v: pointer
> > + * @pos: position in the sequence
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +static int imx_secvio_sc_info_seq_show(struct seq_file *m, void *v) {
> > + struct imx_secvio_sc_info_seq_data *data = m->private;
> > + const struct imx_secvio_info_entry *e;
> > + int ret;
> > + u32 vals[5];
> > + int idx;
> > +
> > + idx = *(loff_t *)v;
> > + e = &data->list[idx];
> > +
> > + /* Read the values */
> > + ret = e->reader(data->dev, e->id, (u32 *)&vals, e->mul);
> > + if (ret) {
> > + dev_err(data->dev, "Fail to read %s %s (idx %d)\n", e->type,
> > + e->name, e->id);
> > + return 0;
> > + }
> > +
> > + seq_printf(m, "%5s/%-10s(%.3d):", e->type, e->name, e->id);
> > +
> > + /* Loop over the values */
> > + for (idx = 0; idx < e->mul; idx++)
> > + seq_printf(m, " %.8x", vals[idx]);
> > +
> > + seq_puts(m, "\n");
> > +
> > + return 0;
> > +}
> > +
> > +static const struct seq_operations imx_secvio_sc_info_seq_ops = {
> > + .start = imx_secvio_sc_info_seq_start,
> > + .next = imx_secvio_sc_info_seq_next,
> > + .stop = imx_secvio_sc_info_seq_stop,
> > + .show = imx_secvio_sc_info_seq_show, };
> > +
> > +/**
> > + * imx_secvio_sc_info_open() - Store node info for ioctl
> > + *
> > + * @inode: inode
> > + * @file: file used to perform the ioctl
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +static int imx_secvio_sc_info_open(struct inode *inode, struct file
> > +*file) {
> > + struct imx_secvio_sc_info_seq_data *data;
> > +
> > + data = __seq_open_private(file, &imx_secvio_sc_info_seq_ops,
> sizeof(*data));
> > + if (!data)
> > + return -ENOMEM;
> > +
> > + data->dev = inode->i_private;
> > + data->list = gs_imx_secvio_info_list;
> > + data->size = ARRAY_SIZE(gs_imx_secvio_info_list);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct file_operations imx_secvio_sc_info_ops = {
> > + .owner = THIS_MODULE,
> > + .open = imx_secvio_sc_info_open,
> > + .read = seq_read,
> > + .llseek = seq_lseek,
> > + .release = seq_release_private,
> > +};
> > +
> > +/**
> > + * if_debugfs_remove_recursive() - Wrapper for
> > +debugfs_remove_recursive
> > + *
> > + * Can be used with devm
> > + *
> > + * @dentry: directory entry
> > + */
> > +static void if_debugfs_remove_recursive(void *dentry) {
> > + debugfs_remove_recursive(dentry);
> > +}
> > +
> > +/**
> > + * imx_secvio_sc_debugfs() - Create the debugfs
> > + *
> > + * @dev: secvio device
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +int imx_secvio_sc_debugfs(struct device *dev) {
> > + struct imx_secvio_sc_data *data = dev_get_drvdata(dev);
> > + struct dentry *dir;
> > + int ret = 0;
> > +
> > + /* Create a folder */
> > + dir = debugfs_create_dir(dev_name(dev), NULL);
> > + if (IS_ERR(dir)) {
> > + dev_err(dev, "Failed to create dfs dir\n");
> > + ret = PTR_ERR(dir);
> > + goto exit;
> > + }
> > + data->dfs = dir;
> > +
> > + ret = devm_add_action(dev, if_debugfs_remove_recursive, data->dfs);
> > + if (ret) {
> > + dev_err(dev, "Failed to add managed action to disable IRQ\n");
> > + goto remove_fs;
> > + }
> > +
> > + /* Create the file to read info and write to reg */
> > + dir = debugfs_create_file("info", 0x666, data->dfs, dev,
> > + &imx_secvio_sc_info_ops);
> > + if (IS_ERR(dir)) {
> > + dev_err(dev, "Failed to add info to debugfs\n");
> > + ret = PTR_ERR(dir);
> > + goto exit;
> > + }
> > +
> > + goto exit;
> > +
> > +remove_fs:
> > + debugfs_remove_recursive(data->dfs);
> > +
> > +exit:
> > + return ret;
> > +}
> > diff --git a/drivers/soc/imx/secvio/imx-secvio-sc-int.h
> > b/drivers/soc/imx/secvio/imx-secvio-sc-int.h
> > new file mode 100644
> > index 0000000..54de7fa
> > --- /dev/null
> > +++ b/drivers/soc/imx/secvio/imx-secvio-sc-int.h
> > @@ -0,0 +1,84 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * Copyright 2019-2020 NXP
> > + */
> > +
> > +#ifndef SECVIO_SC_H
> > +#define SECVIO_SC_H
> > +
> > +/* Includes */
> > +#include <linux/kernel.h>
> > +#include <linux/notifier.h>
> > +#include <linux/semaphore.h>
> > +#include <linux/nvmem-consumer.h>
> > +#include <linux/miscdevice.h>
> > +
> > +/* Access for sc_seco_secvio_config API */ #define SECVIO_CONFIG_READ
> > +0 #define SECVIO_CONFIG_WRITE 1
> > +
> > +/* Internal Structure */
> > +struct imx_secvio_sc_data {
> > + struct device *dev;
> > +
> > + struct imx_sc_ipc *ipc_handle;
> > +
> > + struct notifier_block irq_nb;
> > + struct notifier_block report_nb;
> > + struct notifier_block audit_nb;
> > +
> > + struct nvmem_device *nvmem;
> > +
> > + struct miscdevice miscdev;
> > +
> > +#ifdef CONFIG_DEBUG_FS
> > + struct dentry *dfs;
> > +#endif
> > +
> > + u32 version;
> > +};
> > +
> > +/**
> > + * call_secvio_config() - Wrapper for imx_sc_seco_secvio_config()
> > + *
> > + * @dev: secvio device
> > + * @id: ID of the register, ie the offset of the first register of
> > +the set
> > + * @access: Write (1) or Read (0) the registers
> > + * @data0: Data for the first register
> > + * @data1: Data for the second register
> > + * @data2: Data for the third register
> > + * @data3: Data for the fourth register
> > + * @data4: Data for the fifth register
> > + * @size: Number of register to configure
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +int call_secvio_config(struct device *dev, u8 id, u8 access, u32 *data0,
> > + u32 *data1, u32 *data2, u32 *data3, u32 *data4, u8 size);
> > +
> > +#ifdef CONFIG_DEBUG_FS
> > +extern
> > +int imx_secvio_sc_debugfs(struct device *dev); #else static inline
> > +int imx_secvio_sc_debugfs(struct device *dev) {
> > + return 0;
> > +}
> > +#endif /* CONFIG_DEBUG_FS */
> > +
> > +#ifdef CONFIG_AUDIT
> > +int report_to_audit_notify(struct notifier_block *nb, unsigned long status,
> > + void *notif_info);
> > +#else /* CONFIG_AUDIT */
> > +static inline
> > +int report_to_audit_notify(struct notifier_block *nb, unsigned long status,
> > + void *notif_info)
> > +{
> > + return 0;
> > +}
> > +#endif /* CONFIG_AUDIT */
> > +
> > +#endif /* SECVIO_SC_H */
> > diff --git a/drivers/soc/imx/secvio/imx-secvio-sc.c
> > b/drivers/soc/imx/secvio/imx-secvio-sc.c
> > new file mode 100644
> > index 0000000..1e0d6aa
> > --- /dev/null
> > +++ b/drivers/soc/imx/secvio/imx-secvio-sc.c
> > @@ -0,0 +1,858 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright 2019-2020 NXP
> > + */
> > +
> > +/*
> > + * The SoC of the i.MX8 family contains a hardware block called SNVS
> > + * (Secure Non-Volatile Storage).
> > + *
> > + * The i.MX8 (QM/QXP/DXL) SoC contains the (SNVS) block. This
> > + * block can detect specific hardware attacks. Due to the presence of
> > +the SECO,
> > + * this block can only be accessible using the SCFW API.
> > + *
> > + * This module interacts with the SCU which relays request to/from
> > +the SNVS block
> > + * to detect if security violation occurred.
> > + *
> > + * The module exports an API to add processing when a SV is detected:
> > + * - register_imx_secvio_sc_notifier
> > + * - unregister_imx_secvio_sc_notifier
> > + * - imx_secvio_sc_check_state
> > + * - int_imx_secvio_sc_clear_state
> > + * - imx_secvio_sc_enable_irq
> > + * - imx_secvio_sc_disable_irq
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/device.h>
> > +#include <linux/notifier.h>
> > +#include <linux/module.h>
> > +#include <linux/fs.h>
> > +#include <linux/uaccess.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/nvmem-consumer.h>
> > +#include <linux/miscdevice.h>
> > +
> > +#include <linux/firmware/imx/ipc.h>
> > +#include <linux/firmware/imx/sci.h>
> > +#include <linux/firmware/imx/svc/seco.h> #include
> > +<linux/firmware/imx/svc/rm.h> #include
> > +<dt-bindings/firmware/imx/rsrc.h>
> > +
> > +#include <soc/imx/imx-secvio-sc.h>
> > +#include "imx-secvio-sc-int.h"
> > +
> > +/* Definitions */
> > +static int int_imx_secvio_sc_enable_irq(struct device *dev); static
> > +int int_imx_secvio_sc_disable_irq(struct device *dev);
> > +
> > +/* Reference on the driver_device */
> > +static struct device *gs_imx_secvio_sc_dev;
> > +
> > +/* Register IDs for sc_seco_secvio_config API */ #define HPSVS_ID
> > +0x18 #define LPS_ID 0x4c #define LPTDS_ID 0xa4 #define HPVIDR_ID 0xf8
> > +
> > +#define SECO_MINOR_VERSION_SUPPORT_SECVIO_TAMPER 0x53 #define
> > +SECO_VERSION_MINOR_MASK GENMASK(15, 0)
> > +
> > +/* Notifier list for new CB */
> > +static BLOCKING_NOTIFIER_HEAD(imx_secvio_sc_notifier_chain);
> > +
> > +/**
> > + * register_imx_secvio_sc_notifier() - Add function to secvio call
> > +chain
> > + *
> > + * @nb: notifier block of the function to add
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +int register_imx_secvio_sc_notifier(struct notifier_block *nb) {
> > + return blocking_notifier_chain_register(&imx_secvio_sc_notifier_chain,
> > + nb);
> > +}
> > +EXPORT_SYMBOL(register_imx_secvio_sc_notifier);
> > +
> > +/**
> > + * unregister_imx_secvio_sc_notifier() - Remove function to secvio
> > +call chain
> > + *
> > + * @nb: notifier block of the function to add
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +int unregister_imx_secvio_sc_notifier(struct notifier_block *nb) {
> > + return blocking_notifier_chain_unregister(&imx_secvio_sc_notifier_chain,
> > + nb);
> > +}
> > +EXPORT_SYMBOL(unregister_imx_secvio_sc_notifier);
> > +
> > +/**
> > + * if_imx_scu_irq_register_notifier() - Wrapper for
> > +imx_scu_irq_register_notifier
> > + *
> > + * Can be used for devm actions
> > + *
> > + * @nb: notifier block of the function to add */ static void
> > +if_unregister_imx_secvio_sc_notifier(void *nb) {
> > + unregister_imx_secvio_sc_notifier(nb);
> > +}
> > +
> > +/**
> > + * imx_secvio_sc_notifier_call_chain() - Call secvio notifier chain
> > + *
> > + * @info: The structure containing the info to pass to notified
> > +functions
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +static
> > +int imx_secvio_sc_notifier_call_chain(struct secvio_sc_notifier_info
> > +*info) {
> > + return blocking_notifier_call_chain(&imx_secvio_sc_notifier_chain, 0,
> > + (void *)info);
> > +}
> > +
> > +int call_secvio_config(struct device *dev, u8 id, u8 access, u32 *data0,
> > + u32 *data1, u32 *data2, u32 *data3, u32 *data4, u8 size) {
> > + int ret = 0;
> > + struct imx_secvio_sc_data *data;
> > +
> > + data = dev_get_drvdata(dev);
> > +
> > + ret = imx_sc_seco_secvio_config(data->ipc_handle, id, access, data0,
> > + data1, data2, data3, data4, size);
> > + if (ret)
> > + dev_err(dev, "Fail %s secvio config %d",
> > + ((access) ? "write" : "read"), ret);
> > +
> > + return ret;
> > +}
> > +
> > +/**
> > + * int_imx_secvio_sc_get_state() - Get the state of secvio and tamper
> > + *
> > + * @dev: secvio device
> > + * @info: The structure to use to store the status
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +static int int_imx_secvio_sc_get_state(struct device *dev,
> > + struct secvio_sc_notifier_info *info) {
> > + struct secvio_sc_notifier_info _info = {0};
> > + struct secvio_sc_notifier_info *p_info;
> > + int ret = 0, ret2 = 0;
> > +
> > + p_info = info ? info : &_info;
> > +
> > + /* Read secvio status */
> > + ret = call_secvio_config(dev, HPSVS_ID, SECVIO_CONFIG_READ,
> > + &p_info->hpsvs, NULL, NULL, NULL, NULL, 1);
> > + if (ret) {
> > + ret2 = ret;
> > + dev_warn(dev, "Cannot read secvio status: %d\n", ret);
> > + }
> > + p_info->hpsvs &= HPSVS__ALL_SV__MASK;
> > +
> > + /* Read tampers status */
> > + ret = call_secvio_config(dev, LPS_ID, SECVIO_CONFIG_READ,
> > + &p_info->lps, NULL, NULL, NULL, NULL, 1);
> > + if (ret) {
> > + ret2 = ret;
> > + dev_warn(dev, "Cannot read tamper 1 status: %d\n", ret);
> > + }
> > + p_info->lps &= LPS__ALL_TP__MASK;
> > +
> > + ret = call_secvio_config(dev, LPTDS_ID, SECVIO_CONFIG_READ,
> > + &p_info->lptds, NULL, NULL, NULL, NULL, 1);
> > + if (ret) {
> > + ret2 = ret;
> > + dev_warn(dev, "Cannot read tamper 2 status: %d\n", ret);
> > + }
> > + p_info->lptds &= LPTDS__ALL_TP__MASK;
> > +
> > + dev_dbg(dev, "Status: %.8x, %.8x, %.8x\n", p_info->hpsvs,
> > + p_info->lps, p_info->lptds);
> > +
> > + return ret2;
> > +}
> > +
> > +/**
> > + * imx_secvio_sc_get_state() - Wrapper for
> > +int_imx_secvio_sc_get_state
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +inline int imx_secvio_sc_get_state(struct secvio_sc_notifier_info
> > +*info) {
> > + if (!gs_imx_secvio_sc_dev)
> > + return -EOPNOTSUPP;
> > +
> > + return int_imx_secvio_sc_get_state(gs_imx_secvio_sc_dev, info); }
> > +EXPORT_SYMBOL(imx_secvio_sc_get_state);
> > +
> > +/**
> > + * int_imx_secvio_sc_check_state() - Get the state and call chain of
> > +notifier
> > + * if there is a status
> > + *
> > + * @dev: secvio device
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +static int int_imx_secvio_sc_check_state(struct device *dev) {
> > + struct secvio_sc_notifier_info info = {0};
> > + int ret = 0;
> > +
> > + ret = int_imx_secvio_sc_get_state(dev, &info);
> > + if (ret) {
> > + dev_err(dev, "Failed to get secvio state\n");
> > + goto exit;
> > + }
> > +
> > + /* Call chain of CB registered to this module if status detected */
> > + if (info.hpsvs || info.lps || info.lptds)
> > + if (imx_secvio_sc_notifier_call_chain(&info))
> > + dev_warn(dev,
> > + "Issues when calling the notifier chain\n");
> > +
> > +exit:
> > + return ret;
> > +}
> > +
> > +/**
> > + * imx_secvio_sc_check_state() - Wrapper for
> > +int_imx_secvio_sc_check_state
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +inline int imx_secvio_sc_check_state(void) {
> > + if (!gs_imx_secvio_sc_dev)
> > + return -EOPNOTSUPP;
> > +
> > + return int_imx_secvio_sc_check_state(gs_imx_secvio_sc_dev);
> > +}
> > +EXPORT_SYMBOL(imx_secvio_sc_check_state);
> > +
> > +/**
> > + * imx_secvio_sc_notify() - Process event from SCU
> > + *
> > + * If the event is secvio we check the state, then
> > + * re-enable the IRQ which has been disabled by SCU
> > + *
> > + * @nb: secvio device
> > + * @event: The id of the IRQ received in a group
> > + * @group: The group of the IRQ
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +static int imx_secvio_sc_notify(struct notifier_block *nb,
> > + unsigned long event, void *group) {
> > + struct imx_secvio_sc_data *data =
> > + container_of(nb, struct imx_secvio_sc_data,
> > + irq_nb);
> > + struct device *dev = data->dev;
> > + int ret = 0;
> > +
> > + /* Filter event for us */
> > + if (!((event & IMX_SC_IRQ_SECVIO) &&
> > + (*(u8 *)group == IMX_SC_IRQ_GROUP_WAKE)))
> > + goto exit;
> > +
> > + dev_warn(dev, "secvio security violation detected\n");
> > +
> > + ret = int_imx_secvio_sc_check_state(dev);
> > +
> > + /* Re-enable interrupt */
> > + ret = int_imx_secvio_sc_enable_irq(dev);
> > + if (ret)
> > + dev_err(dev, "Failed to enable IRQ\n");
> > +
> > +exit:
> > + return ret;
> > +}
> > +
> > +/**
> > + * int_imx_secvio_sc_clear_state() - Clear secvio and tamper state
> > + *
> > + * @dev: secvio device
> > + * @hpsvs: high power security violation status to clear
> > + * @lps: low power status to clear
> > + * @lptds: low power tamper detector status to clear
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +static int int_imx_secvio_sc_clear_state(struct device *dev, u32 hpsvs, u32
> lps,
> > + u32 lptds)
> > +{
> > + int ret = 0;
> > +
> > + ret = call_secvio_config(dev, HPSVS_ID, SECVIO_CONFIG_WRITE, &hpsvs,
> > + NULL, NULL, NULL, NULL, 1);
> > + if (ret) {
> > + dev_err(dev, "Cannot clear secvio status: %d\n", ret);
> > + goto exit;
> > + }
> > +
> > + ret = call_secvio_config(dev, LPS_ID, SECVIO_CONFIG_WRITE, &lps, NULL,
> > + NULL, NULL, NULL, 1);
> > + if (ret) {
> > + dev_err(dev, "Cannot clear tamper 1 status: %d\n", ret);
> > + goto exit;
> > + }
> > +
> > + ret = call_secvio_config(dev, LPTDS_ID, SECVIO_CONFIG_WRITE, &lptds,
> > + NULL, NULL, NULL, NULL, 1);
> > + if (ret) {
> > + dev_err(dev, "Cannot clear tamper 2 status: %d\n", ret);
> > + goto exit;
> > + }
> > +
> > +exit:
> > + return ret;
> > +}
> > +
> > +/**
> > + * imx_secvio_sc_clear_state() - Wrapper for
> > +imx_secvio_sc_clear_state
> > + *
> > + * @hpsvs: high power security violation status to clear
> > + * @lps: low power status to clear
> > + * @lptds: low power tamper detector status to clear
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +inline int imx_secvio_sc_clear_state(u32 hpsvs, u32 lps, u32 lptds) {
> > + if (!gs_imx_secvio_sc_dev)
> > + return -EOPNOTSUPP;
> > +
> > + return int_imx_secvio_sc_clear_state(gs_imx_secvio_sc_dev, hpsvs, lps,
> > + lptds);
> > +}
> > +EXPORT_SYMBOL(imx_secvio_sc_clear_state);
> > +
> > +/**
> > + * report_to_user_notify() - Print to console the status
> > + *
> > + * @nb: notifier block
> > + * @status: error code
> > + * @notif_info: Pointer on structure containing the status of the
> > +secvio and
> > + * tampers
> > + *
> > + * Return:
> > + * 0 - OK
> > + */
> > +static int report_to_user_notify(struct notifier_block *nb,
> > + unsigned long status, void *notif_info) {
> > + struct secvio_sc_notifier_info *info = notif_info;
> > + struct imx_secvio_sc_data *data =
> > + container_of(nb, struct imx_secvio_sc_data,
> > + report_nb);
> > + struct device *dev = data->dev;
> > +
> > + /* Information about the security violation */
> > + if (info->hpsvs & HPSVS__LP_SEC_VIO__MASK)
> > + dev_info(dev, "SNVS secvio: LPSV\n");
> > + if (info->hpsvs & HPSVS__SW_LPSV__MASK)
> > + dev_info(dev, "SNVS secvio: SW LPSV\n");
> > + if (info->hpsvs & HPSVS__SW_FSV__MASK)
> > + dev_info(dev, "SNVS secvio: SW FSV\n");
> > + if (info->hpsvs & HPSVS__SW_SV__MASK)
> > + dev_info(dev, "SNVS secvio: SW SV\n");
> > + if (info->hpsvs & HPSVS__SV5__MASK)
> > + dev_info(dev, "SNVS secvio: SV 5\n");
> > + if (info->hpsvs & HPSVS__SV4__MASK)
> > + dev_info(dev, "SNVS secvio: SV 4\n");
> > + if (info->hpsvs & HPSVS__SV3__MASK)
> > + dev_info(dev, "SNVS secvio: SV 3\n");
> > + if (info->hpsvs & HPSVS__SV2__MASK)
> > + dev_info(dev, "SNVS secvio: SV 2\n");
> > + if (info->hpsvs & HPSVS__SV1__MASK)
> > + dev_info(dev, "SNVS secvio: SV 1\n");
> > + if (info->hpsvs & HPSVS__SV0__MASK)
> > + dev_info(dev, "SNVS secvio: SV 0\n");
> > +
> > + /* Information about the tampers */
> > + if (info->lps & LPS__ESVD__MASK)
> > + dev_info(dev, "SNVS tamper: External SV\n");
> > + if (info->lps & LPS__ET2D__MASK)
> > + dev_info(dev, "SNVS tamper: Tamper 2\n");
> > + if (info->lps & LPS__ET1D__MASK)
> > + dev_info(dev, "SNVS tamper: Tamper 1\n");
> > + if (info->lps & LPS__WMT2D__MASK)
> > + dev_info(dev, "SNVS tamper: Wire Mesh 2\n");
> > + if (info->lps & LPS__WMT1D__MASK)
> > + dev_info(dev, "SNVS tamper: Wire Mesh 1\n");
> > + if (info->lps & LPS__VTD__MASK)
> > + dev_info(dev, "SNVS tamper: Voltage\n");
> > + if (info->lps & LPS__TTD__MASK)
> > + dev_info(dev, "SNVS tamper: Temperature\n");
> > + if (info->lps & LPS__CTD__MASK)
> > + dev_info(dev, "SNVS tamper: Clock\n");
> > + if (info->lps & LPS__PGD__MASK)
> > + dev_info(dev, "SNVS tamper: Power Glitch\n");
> > + if (info->lps & LPS__MCR__MASK)
> > + dev_info(dev, "SNVS tamper: Monotonic Counter rollover\n");
> > + if (info->lps & LPS__SRTCR__MASK)
> > + dev_info(dev, "SNVS tamper: Secure RTC rollover\n");
> > + if (info->lps & LPS__LPTA__MASK)
> > + dev_info(dev, "SNVS tamper: Time alarm\n");
> > +
> > + if (info->lptds & LPTDS__ET10D__MASK)
> > + dev_info(dev, "SNVS tamper: Tamper 10\n");
> > + if (info->lptds & LPTDS__ET9D__MASK)
> > + dev_info(dev, "SNVS tamper: Tamper 9\n");
> > + if (info->lptds & LPTDS__ET8D__MASK)
> > + dev_info(dev, "SNVS tamper: Tamper 8\n");
> > + if (info->lptds & LPTDS__ET7D__MASK)
> > + dev_info(dev, "SNVS tamper: Tamper 7\n");
> > + if (info->lptds & LPTDS__ET6D__MASK)
> > + dev_info(dev, "SNVS tamper: Tamper 6\n");
> > + if (info->lptds & LPTDS__ET5D__MASK)
> > + dev_info(dev, "SNVS tamper: Tamper 5\n");
> > + if (info->lptds & LPTDS__ET4D__MASK)
> > + dev_info(dev, "SNVS tamper: Tamper 4\n");
> > + if (info->lptds & LPTDS__ET3D__MASK)
> > + dev_info(dev, "SNVS tamper: Tamper 3\n");
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * int_imx_secvio_sc_enable_irq() - Enable the secvio IRQ in SCU
> > + *
> > + * @dev: secvio device
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +static int int_imx_secvio_sc_enable_irq(struct device *dev) {
> > + int ret = 0, ret2;
> > + u32 irq_status;
> > + struct imx_secvio_sc_data *data;
> > +
> > + data = dev_get_drvdata(dev);
> > +
> > + /* Enable the IRQ */
> > + ret = imx_scu_irq_group_enable(IMX_SC_IRQ_GROUP_WAKE,
> IMX_SC_IRQ_SECVIO,
> > + true);
> > + if (ret) {
> > + dev_err(dev, "Cannot enable SCU IRQ: %d\n", ret);
> > + goto exit;
> > + }
> > +
> > + /* Enable interrupt */
> > + ret = imx_sc_seco_secvio_enable(data->ipc_handle);
> > + if (ret) {
> > + dev_err(dev, "Cannot enable SNVS irq: %d\n", ret);
> > + goto exit;
> > + };
> > +
> > + /* Unmask interrupt */
> > + ret = imx_scu_irq_get_status(IMX_SC_IRQ_GROUP_WAKE, &irq_status);
> > + if (ret) {
> > + dev_err(dev, "Cannot unmask irq: %d\n", ret);
> > + goto exit;
> > + };
> > +
> > +exit:
> > + if (ret) {
> > + ret2 = int_imx_secvio_sc_disable_irq(dev);
> > + if (ret2)
> > + dev_warn(dev, "Failed to disable the IRQ\n");
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +/**
> > + * int_imx_secvio_sc_disable_irq() - Disable secvio IRQ
> > + *
> > + * @dev: secvio device
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +static int int_imx_secvio_sc_disable_irq(struct device *dev) {
> > + int ret = 0;
> > + struct imx_secvio_sc_data *data;
> > +
> > + data = dev_get_drvdata(dev);
> > +
> > + /* Disable the IRQ */
> > + ret = imx_scu_irq_group_enable(IMX_SC_IRQ_GROUP_WAKE,
> IMX_SC_IRQ_SECVIO,
> > + false);
> > + if (ret) {
> > + dev_err(dev, "Cannot disable SCU IRQ: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * if_imx_secvio_sc_disable_irq() - Wrapper for
> > +int_imx_secvio_sc_disable_irq
> > + *
> > + * Can be used with devm
> > + *
> > + * @dev: secvio device
> > + */
> > +static void if_imx_secvio_sc_disable_irq(void *dev) {
> > + int_imx_secvio_sc_disable_irq(dev);
> > +}
> > +
> > +/**
> > + * imx_secvio_sc_open() - Store node info for ioctl
> > + *
> > + * @node: inode
> > + * @file: file used to perform the ioctl
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +static int imx_secvio_sc_open(struct inode *node, struct file *filp)
> > +{
> > + filp->private_data = node->i_private;
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * imx_secvio_sc_ioctl() - IOCTL handler for the driver
> > + *
> > + * @file: file used to perform the ioctl
> > + * @cmd: command to perform
> > + * @arg: Pointer on structure with info for the command
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +static long imx_secvio_sc_ioctl(struct file *file, unsigned int cmd,
> > +unsigned long arg) {
> > + struct device *dev = file->private_data;
> > + struct secvio_sc_notifier_info info;
> > + int ret;
> > +
> > + switch (cmd) {
> > + case IMX_SECVIO_SC_GET_STATE:
> > + ret = int_imx_secvio_sc_get_state(dev, &info);
> > + if (ret) {
> > + dev_err(dev, "Fail to get state\n");
> > + goto exit;
> > + }
> > +
> > + ret = copy_to_user((void *)arg, &info, sizeof(info));
> > + if (ret) {
> > + dev_err(dev, "Fail to copy info to user\n");
> > + ret = -EFAULT;
> > + goto exit;
> > + }
> > + break;
> > + case IMX_SECVIO_SC_CHECK_STATE:
> > + ret = int_imx_secvio_sc_check_state(dev);
> > + if (ret) {
> > + dev_err(dev, "Fail to check state\n");
> > + goto exit;
> > + }
> > + break;
> > + case IMX_SECVIO_SC_CLEAR_STATE:
> > + ret = copy_from_user(&info, (void *)arg, sizeof(info));
> > + if (ret) {
> > + dev_err(dev, "Fail to copy info from user\n");
> > + ret = -EFAULT;
> > + goto exit;
> > + }
> > +
> > + ret = int_imx_secvio_sc_clear_state(dev, info.hpsvs, info.lps,
> > + info.lptds);
> > + if (ret) {
> > + dev_err(dev, "Fail to clear state\n");
> > + goto exit;
> > + }
> > + break;
> > + default:
> > + ret = -ENOIOCTLCMD;
> > + }
> > +
> > +exit:
> > + return ret;
> > +}
> > +
> > +const static struct file_operations imx_secvio_sc_fops = {
> > + .owner = THIS_MODULE,
> > + .open = imx_secvio_sc_open,
> > + .unlocked_ioctl = imx_secvio_sc_ioctl, };
> > +
> > +static void if_misc_deregister(void *miscdevice) {
> > + misc_deregister(miscdevice);
> > +}
> > +
> > +static void reset_global_dev(void *dev) {
> > + gs_imx_secvio_sc_dev = NULL;
> > +}
> > +
> > +/**
> > + * imx_secvio_sc_setup() - Configure the driver
> > + *
> > + * @dev: secvio device
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +static int imx_secvio_sc_setup(struct device *dev) {
> > + struct imx_secvio_sc_data *data;
> > + u32 seco_version = 0;
> > + bool own_secvio;
> > + u32 irq_status;
> > + int ret = 0;
> > +
> > + if (!devres_open_group(dev, NULL, GFP_KERNEL)) {
> > + ret = -ENOMEM;
> > + goto exit;
> > + }
> > +
> > + /* Allocate private data */
> > + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> > + if (!data) {
> > + ret = -ENOMEM;
> > + dev_err(dev, "Failed to allocate mem for data\n");
> > + goto clean;
> > + }
> > +
> > + data->dev = dev;
> > +
> > + dev_set_drvdata(dev, data);
> > +
> > + data->nvmem = devm_nvmem_device_get(dev, NULL);
> > + if (IS_ERR(data->nvmem)) {
> > + ret = PTR_ERR(data->nvmem);
> > + if (ret != -EPROBE_DEFER)
> > + dev_err(dev, "Failed to retrieve nvmem\n");
> > +
> > + goto clean;
> > + }
> > +
> > + /* Get a handle */
> > + ret = imx_scu_get_handle(&data->ipc_handle);
> > + if (ret) {
> > + dev_err(dev, "cannot get handle to scu: %d\n", ret);
> > + goto clean;
> > + };
> > +
> > + /* Check the version of the SECO */
> > + ret = imx_sc_seco_build_info(data->ipc_handle, &seco_version, NULL);
> > + if (ret) {
> > + dev_err(dev, "Failed to get seco version\n");
> > + goto clean;
> > + }
> > +
> > + if ((seco_version & SECO_VERSION_MINOR_MASK) <
> > + SECO_MINOR_VERSION_SUPPORT_SECVIO_TAMPER) {
> > + dev_err(dev, "SECO version %.8x doesn't support all secvio\n",
> > + seco_version);
> > + ret = -EOPNOTSUPP;
> > + goto clean;
> > + }
> > +
> > + /* Init debug FS */
> > + ret = imx_secvio_sc_debugfs(dev);
> > + if (ret) {
> > + dev_err(dev, "Failed to set debugfs\n");
> > + goto clean;
> > + }
> > +
> > + /* Check we own the SECVIO */
> > + ret = imx_sc_rm_is_resource_owned(data->ipc_handle,
> IMX_SC_R_SECVIO);
> > + if (ret < 0) {
> > + dev_err(dev, "Failed to retrieve secvio ownership\n");
> > + goto clean;
> > + }
> > +
> > + own_secvio = ret > 0;
> > + if (!own_secvio) {
> > + dev_err(dev, "Secvio resource is not owned\n");
> > + ret = -EPERM;
> > + goto clean;
> > + }
> > +
> > + /* Check IRQ exists and enable it */
> > + ret = imx_scu_irq_get_status(IMX_SC_IRQ_GROUP_WAKE, &irq_status);
> > + if (ret) {
> > + dev_err(dev, "Cannot get IRQ state: %d\n", ret);
> > + goto clean;
> > + }
> > +
> > + ret = int_imx_secvio_sc_enable_irq(dev);
> > + if (ret) {
> > + dev_err(dev, "Failed to enable IRQ\n");
> > + goto clean;
> > + }
> > +
> > + ret = devm_add_action_or_reset(dev, if_imx_secvio_sc_disable_irq, dev);
> > + if (ret) {
> > + dev_err(dev, "Failed to add managed action to disable IRQ\n");
> > + goto clean;
> > + }
> > +
> > + /* Register the notifier for IRQ from SNVS */
> > + data->irq_nb.notifier_call = imx_secvio_sc_notify;
> > + ret = imx_scu_irq_register_notifier(&data->irq_nb);
> > + if (ret) {
> > + dev_err(dev, "Failed to register IRQ notification handler\n");
> > + goto clean;
> > + }
> > +
> > + ret = devm_add_action_or_reset(dev, if_unregister_imx_secvio_sc_notifier,
> > + &data->irq_nb);
> > + if (ret) {
> > + dev_err(dev, "Failed to add action to remove irq notify\n");
> > + goto clean;
> > + }
> > +
> > + /* Register the notification for reporting to user */
> > + data->report_nb.notifier_call = report_to_user_notify;
> > + ret = register_imx_secvio_sc_notifier(&data->report_nb);
> > + if (ret) {
> > + dev_err(dev, "Failed to register report notify handler\n");
> > + goto clean;
> > + }
> > +
> > + ret = devm_add_action_or_reset(dev, if_unregister_imx_secvio_sc_notifier,
> > + &data->report_nb);
> > + if (ret) {
> > + dev_err(dev, "Failed to add action to remove report notify\n");
> > + goto clean;
> > + }
> > +
> > + /* Register the notification to report to audit FW */
> > + data->audit_nb.notifier_call = report_to_audit_notify;
> > + ret = register_imx_secvio_sc_notifier(&data->audit_nb);
> > + if (ret) {
> > + dev_err(dev, "Failed to register report audit handler\n");
> > + goto clean;
> > + }
> > +
> > + ret = devm_add_action(dev, if_unregister_imx_secvio_sc_notifier,
> > + &data->audit_nb);
> > + if (ret) {
> > + dev_err(dev, "Failed to add action to remove audit notif\n");
> > + goto clean;
> > + }
> > +
> > + /* Register misc device for IOCTL */
> > + data->miscdev.name = devm_kstrdup(dev, "secvio-sc", GFP_KERNEL);
> > + data->miscdev.minor = MISC_DYNAMIC_MINOR;
> > + data->miscdev.fops = &imx_secvio_sc_fops;
> > + data->miscdev.parent = dev;
> > + ret = misc_register(&data->miscdev);
> > + if (ret) {
> > + dev_err(dev, "failed to register misc device\n");
> > + goto exit;
> > + }
> > +
> > + ret = devm_add_action_or_reset(dev, if_misc_deregister, &data->miscdev);
> > + if (ret) {
> > + dev_err(dev, "Failed to add action to unregister miscdev\n");
> > + goto clean;
> > + }
> > +
> > + gs_imx_secvio_sc_dev = dev;
> > + ret = devm_add_action_or_reset(dev, reset_global_dev, dev);
> > + if (ret) {
> > + dev_err(dev, "Failed to add action to disable global dev\n");
> > + goto clean;
> > + }
> > +
> > + /* Process current state of the secvio and tampers */
> > + int_imx_secvio_sc_check_state(dev);
> > +
> > + devres_remove_group(dev, NULL);
> > +
> > + goto exit;
> > +
> > +clean:
> > + devres_release_group(dev, NULL);
> > +
> > +exit:
> > + return ret;
> > +}
> > +
> > +/**
> > + * imx_secvio_sc_probe() - Probe the driver
> > + *
> > + * @pdev: platform device
> > + *
> > + * Return:
> > + * 0 - OK
> > + * < 0 - error.
> > + */
> > +static int imx_secvio_sc_probe(struct platform_device *pdev) {
> > + int ret;
> > + struct device *dev = &pdev->dev;
> > +
> > + ret = imx_secvio_sc_setup(dev);
> > + if (ret && ret != -EPROBE_DEFER)
> > + dev_err(dev, "Failed to setup\n");
> > +
> > + return ret;
> > +}
> > +
> > +static const struct of_device_id imx_secvio_sc_dt_ids[] = {
> > + { .compatible = "fsl,imx-sc-secvio", },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, imx_secvio_sc_dt_ids);
> > +
> > +static struct platform_driver imx_secvio_sc_driver = {
> > + .driver = {
> > + .owner = THIS_MODULE,
> > + .name = "imx-secvio-sc",
> > + .of_match_table = imx_secvio_sc_dt_ids,
> > + },
> > + .probe = imx_secvio_sc_probe,
> > +};
> > +module_platform_driver(imx_secvio_sc_driver);
> > +
> > +MODULE_AUTHOR("Franck LENORMAND <franck.lenormand@....com>");
> > +MODULE_DESCRIPTION("NXP i.MX driver to handle SNVS secvio irq sent by
> > +SCFW"); MODULE_LICENSE("GPL");
> > diff --git a/include/soc/imx/imx-secvio-sc.h
> > b/include/soc/imx/imx-secvio-sc.h new file mode 100644 index
> > 0000000..a26e2ff
> > --- /dev/null
> > +++ b/include/soc/imx/imx-secvio-sc.h
> > @@ -0,0 +1,177 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * Copyright 2019-2020 NXP
> > + */
> > +
> > +#ifndef _MISC_IMX_SECVIO_SC_H_
> > +#define _MISC_IMX_SECVIO_SC_H_
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/notifier.h>
> > +
> > +/* Bitmask of the security violation status bit in the HPSVS register
> > +*/ #define HPSVS__LP_SEC_VIO__MASK BIT(31)
> > +#define HPSVS__SW_LPSV__MASK BIT(15)
> > +#define HPSVS__SW_FSV__MASK BIT(14)
> > +#define HPSVS__SW_SV__MASK BIT(13)
> > +#define HPSVS__SV5__MASK BIT(5)
> > +#define HPSVS__SV4__MASK BIT(4)
> > +#define HPSVS__SV3__MASK BIT(3)
> > +#define HPSVS__SV2__MASK BIT(2)
> > +#define HPSVS__SV1__MASK BIT(1)
> > +#define HPSVS__SV0__MASK BIT(0)
> > +
> > +/* Bitmask of all security violation status bit in the HPSVS register
> > +*/ #define HPSVS__ALL_SV__MASK (HPSVS__LP_SEC_VIO__MASK | \
> > + HPSVS__SW_LPSV__MASK | \
> > + HPSVS__SW_FSV__MASK | \
> > + HPSVS__SW_SV__MASK | \
> > + HPSVS__SV5__MASK | \
> > + HPSVS__SV4__MASK | \
> > + HPSVS__SV3__MASK | \
> > + HPSVS__SV2__MASK | \
> > + HPSVS__SV1__MASK | \
> > + HPSVS__SV0__MASK)
> > +
> > +/*
> > + * Bitmask of the security violation and tampers status bit in the
> > +LPS register */ #define LPS__ESVD__MASK BIT(16) #define
> > +LPS__ET2D__MASK BIT(10) #define LPS__ET1D__MASK BIT(9) #define
> > +LPS__WMT2D__MASK BIT(8) #define LPS__WMT1D__MASK BIT(7)
> > +#define LPS__VTD__MASK BIT(6)
> > +#define LPS__TTD__MASK BIT(5)
> > +#define LPS__CTD__MASK BIT(4)
> > +#define LPS__PGD__MASK BIT(3)
> > +#define LPS__MCR__MASK BIT(2)
> > +#define LPS__SRTCR__MASK BIT(1)
> > +#define LPS__LPTA__MASK BIT(0)
> > +
> > +/*
> > + * Bitmask of all security violation and tampers status bit in the LPS register
> > + */
> > +#define LPS__ALL_TP__MASK (LPS__ESVD__MASK | \
> > + LPS__ET2D__MASK | \
> > + LPS__ET1D__MASK | \
> > + LPS__WMT2D__MASK | \
> > + LPS__WMT1D__MASK | \
> > + LPS__VTD__MASK | \
> > + LPS__TTD__MASK | \
> > + LPS__CTD__MASK | \
> > + LPS__PGD__MASK | \
> > + LPS__MCR__MASK | \
> > + LPS__SRTCR__MASK | \
> > + LPS__LPTA__MASK)
> > +
> > +/*
> > + * Bitmask of the security violation and tampers status bit in the LPTDS
> > + * register
> > + */
> > +#define LPTDS__ET10D__MASK BIT(7)
> > +#define LPTDS__ET9D__MASK BIT(6)
> > +#define LPTDS__ET8D__MASK BIT(5)
> > +#define LPTDS__ET7D__MASK BIT(4)
> > +#define LPTDS__ET6D__MASK BIT(3)
> > +#define LPTDS__ET5D__MASK BIT(2)
> > +#define LPTDS__ET4D__MASK BIT(1)
> > +#define LPTDS__ET3D__MASK BIT(0)
> > +
> > +/*
> > + * Bitmask of all security violation and tampers status bit in the LPTDS
> > + * register
> > + */
> > +#define LPTDS__ALL_TP__MASK (LPTDS__ET10D__MASK | \
> > + LPTDS__ET9D__MASK | \
> > + LPTDS__ET8D__MASK | \
> > + LPTDS__ET7D__MASK | \
> > + LPTDS__ET6D__MASK | \
> > + LPTDS__ET5D__MASK | \
> > + LPTDS__ET4D__MASK | \
> > + LPTDS__ET3D__MASK)
> > +
> > +/**
> > + * struct secvio_sc_notifier_info - Information about the status of the SNVS
> > + * @hpsvs: status from register HPSVS
> > + * @lps: status from register LPS
> > + * @lptds: status from register LPTDS
> > + */
> > +struct secvio_sc_notifier_info {
> > + u32 hpsvs;
> > + u32 lps;
> > + u32 lptds;
> > +};
> > +
> > +/**
> > + * register_imx_secvio_sc_notifier() - Register a notifier
> > + *
> > + * @nb: The notifier block structure
> > + *
> > + * Register a function to notify to the imx-secvio-sc module. The function
> > + * will be notified when a check of the state of the SNVS happens: called by
> > + * a user or triggered by an interruption form the SNVS.
> > + *
> > + * The struct secvio_sc_notifier_info is passed as data to the notifier.
> > + *
> > + * Return: 0 in case of success
> > + */
> > +int register_imx_secvio_sc_notifier(struct notifier_block *nb);
> > +
> > +/**
> > + * unregister_imx_secvio_sc_notifier() - Unregister a notifier
> > + *
> > + * @nb: The notifier block structure
> > + *
> > + * Return: 0 in case of success
> > + */
> > +int unregister_imx_secvio_sc_notifier(struct notifier_block *nb);
> > +
> > +/**
> > + * imx_secvio_sc_get_state() - Get the state of the SNVS
> > + *
> > + * @info: The structure containing the state of the SNVS
> > + *
> > + * Return: 0 in case of success
> > + */
> > +int imx_secvio_sc_get_state(struct secvio_sc_notifier_info *info);
> > +
> > +/**
> > + * imx_secvio_sc_check_state() - Check the state of the SNVS
> > + *
> > + * If a security violation or a tamper is detected, the list of notifier
> > + * (registered using register_imx_secvio_sc_notifier() ) will be called
> > + *
> > + * Return: 0 in case of success
> > + */
> > +int imx_secvio_sc_check_state(void);
> > +
> > +/**
> > + * imx_secvio_sc_clear_state() - Clear the state of the SNVS
> > + *
> > + * @hpsvs: Value to write to HPSVS register
> > + * @lps: Value to write to LPS register
> > + * @lptds: Value to write to LPTDSregister
> > + *
> > + * The function will write the value provided to the corresponding register
> > + * which will clear the status of the bits set.
> > + *
> > + * Return: 0 in case of success
> > + */
> > +int imx_secvio_sc_clear_state(u32 hpsvs, u32 lps, u32 lptds);
> > +
> > +/* Commands of the ioctl interface */
> > +enum ioctl_cmd_t {
> > + GET_STATE,
> > + CHECK_STATE,
> > + CLEAR_STATE,
> > +};
> > +
> > +/* Definition for the ioctl interface */
> > +#define IMX_SECVIO_SC_GET_STATE _IOR('S', GET_STATE, \
> > + struct secvio_sc_notifier_info)
> > +#define IMX_SECVIO_SC_CHECK_STATE _IO('S', CHECK_STATE)
> > +#define IMX_SECVIO_SC_CLEAR_STATE _IOW('S', CLEAR_STATE, \
> > + struct secvio_sc_notifier_info)
> > +
> > +#endif /* _MISC_IMX_SECVIO_SC_H_ */
> > --
> > 2.7.4
> >
Powered by blists - more mailing lists