lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 19 Oct 2020 10:04:08 +0200
From:   Pali Rohár <pali@...nel.org>
To:     Gregory CLEMENT <gregory.clement@...tlin.com>,
        Jason Cooper <jason@...edaemon.net>,
        Andrew Lunn <andrew@...n.ch>,
        Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Andre Heider <a.heider@...il.com>,
        Gérald Kerma <gerald@....net>
Cc:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] arm64: dts: marvell: espressobin: Add support for LED2

Hello! Gregory, I would like to remind you following patch.

Andre, if you have a time, could you test it too?

On Tuesday 06 October 2020 14:44:55 Pali Rohár wrote:
> LED2 is connected to MPP1_2 pin. It is working only on V7 boards.
> V5 boards have hw bug which cause that LED2 is non-working.
> 
> So enable LED2 only for Espressobin V7 boards.
> 
> Note that LED1 is connected to LED_WLAN# pin on miniPCIe card and LED3 to
> power supply. Therefore on Espressobin board only LED2 can be controlled
> directly from the host. LED1 is possible to control via WiFi card inserted
> in miniPCIe slot if driver for particular card supports it.
> 
> Signed-off-by: Pali Rohár <pali@...nel.org>
> Tested-by: Gérald Kerma <gerald@....net>
> 
> ---
> 
> Previous version of this patch was sent by Uwe in March 2018, but it did
> not work on any tested V5 board. Now we know it was due to V5 HW bug.
> 
> https://lore.kernel.org/linux-arm-kernel/20180321105005.18426-3-u.kleine-koenig@pengutronix.de/
> ---
>  .../dts/marvell/armada-3720-espressobin-v7-emmc.dts |  4 ++++
>  .../boot/dts/marvell/armada-3720-espressobin-v7.dts |  4 ++++
>  .../boot/dts/marvell/armada-3720-espressobin.dtsi   | 13 +++++++++++++
>  3 files changed, 21 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> index 4775a7eda481..75401eab4d42 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> @@ -39,3 +39,7 @@
>  &sdhci0 {
>  	status = "okay";
>  };
> +
> +&led2 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> index c47a93978386..48a7f50fb427 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> @@ -34,3 +34,7 @@
>  &switch0port3 {
>  	label = "wan";
>  };
> +
> +&led2 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
> index 8a1c678bea5f..daffe136c523 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
> @@ -41,6 +41,19 @@
>  			  3300000 0x0>;
>  		enable-active-high;
>  	};
> +
> +	led2: gpio-led2 {
> +		/* led2 is working only on v7 board */
> +		status = "disabled";
> +
> +		compatible = "gpio-leds";
> +
> +		led2 {
> +			label = "led2";
> +			gpios = <&gpionb 2 GPIO_ACTIVE_LOW>;
> +			default-state = "off";
> +		};
> +	};
>  };
>  
>  /* J9 */
> -- 
> 2.20.1
> 

Powered by blists - more mailing lists