[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201019101110.636378243@linutronix.de>
Date: Mon, 19 Oct 2020 12:06:39 +0200
From: Thomas Gleixner <tglx@...utronix.de>
To: LKML <linux-kernel@...r.kernel.org>
Cc: Peter Zijlstra <peterz@...radead.org>,
"Ahmed S. Darwish" <a.darwish@...utronix.de>,
Sebastian Andrzej Siewior <bigeasy@...utronix.de>,
Felipe Balbi <balbi@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-arm-kernel@...ts.infradead.org, linux-usb@...r.kernel.org,
Thomas Winischhofer <thomas@...ischhofer.net>,
Johan Hovold <johan@...nel.org>,
Mathias Nyman <mathias.nyman@...el.com>,
Valentina Manea <valentina.manea.m@...il.com>,
Shuah Khan <shuah@...nel.org>,
Alan Stern <stern@...land.harvard.edu>,
linux-omap@...r.kernel.org, Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
linux-samsung-soc@...r.kernel.org,
Duncan Sands <duncan.sands@...e.fr>
Subject: [patch V2 10/13] usb: gadget: pxa27x_udc: Replace in_interrupt()
usage in comments
From: Ahmed S. Darwish <a.darwish@...utronix.de>
The usage of in_interrupt() in drivers is phased out for various reasons.
Documenting calling contexts of functions with 'in_interrupt()' or
'!in_interrupt()' is imprecise: For a function which might sleep the
condition is preemptible task context, which is not what '!in_interrupt()'
describes.
Replace the context docummentation with plain text and make them match
reality.
Signed-off-by: Ahmed S. Darwish <a.darwish@...utronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@...utronix.de>
Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
Cc: Felipe Balbi <balbi@...nel.org>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-arm-kernel@...ts.infradead.org
Cc: linux-usb@...r.kernel.org
---
drivers/usb/gadget/udc/pxa27x_udc.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -304,7 +304,7 @@ static struct pxa_ep *find_pxa_ep(struct
* update_pxa_ep_matches - update pxa_ep cached values in all udc_usb_ep
* @udc: pxa udc
*
- * Context: in_interrupt()
+ * Context: interrupt handler
*
* Updates all pxa_ep fields in udc_usb_ep structures, if this field was
* previously set up (and is not NULL). The update is necessary is a
@@ -859,7 +859,7 @@ static int write_packet(struct pxa_ep *e
* @ep: pxa physical endpoint
* @req: usb request
*
- * Context: callable when in_interrupt()
+ * Context: interrupt handler
*
* Unload as many packets as possible from the fifo we use for usb OUT
* transfers and put them into the request. Caller should have made sure
@@ -997,7 +997,7 @@ static int read_ep0_fifo(struct pxa_ep *
* @ep: control endpoint
* @req: request
*
- * Context: callable when in_interrupt()
+ * Context: interrupt handler
*
* Sends a request (or a part of the request) to the control endpoint (ep0 in).
* If the request doesn't fit, the remaining part will be sent from irq.
@@ -1036,8 +1036,8 @@ static int write_ep0_fifo(struct pxa_ep
* @_req: usb request
* @gfp_flags: flags
*
- * Context: normally called when !in_interrupt, but callable when in_interrupt()
- * in the special case of ep0 setup :
+ * Context: thread context or from the interrupt handler in the
+ * special case of ep0 setup :
* (irq->handle_ep0_ctrl_req->gadget_setup->pxa_ep_queue)
*
* Returns 0 if succedeed, error otherwise
@@ -1512,7 +1512,8 @@ static int should_disable_udc(struct pxa
* pxa_udc_pullup - Offer manual D+ pullup control
* @_gadget: usb gadget using the control
* @is_active: 0 if disconnect, else connect D+ pullup resistor
- * Context: !in_interrupt()
+ *
+ * Context: task context, might sleep
*
* Returns 0 if OK, -EOPNOTSUPP if udc driver doesn't handle D+ pullup
*/
@@ -1560,7 +1561,7 @@ static int pxa_udc_vbus_session(struct u
* @_gadget: usb gadget
* @mA: current drawn
*
- * Context: !in_interrupt()
+ * Context: task context, might sleep
*
* Called after a configuration was chosen by a USB host, to inform how much
* current can be drawn by the device from VBus line.
@@ -1886,7 +1887,7 @@ static void handle_ep0_ctrl_req(struct p
* @fifo_irq: 1 if triggered by fifo service type irq
* @opc_irq: 1 if triggered by output packet complete type irq
*
- * Context : when in_interrupt() or with ep->lock held
+ * Context : interrupt handler
*
* Tries to transfer all pending request data into the endpoint and/or
* transfer all pending data in the endpoint into usb requests.
@@ -2011,7 +2012,7 @@ static void handle_ep0(struct pxa_udc *u
* Tries to transfer all pending request data into the endpoint and/or
* transfer all pending data in the endpoint into usb requests.
*
- * Is always called when in_interrupt() and with ep->lock released.
+ * Is always called from the interrupt handler. ep->lock must not be held.
*/
static void handle_ep(struct pxa_ep *ep)
{
Powered by blists - more mailing lists