[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201019165836.GA496175@xps15>
Date: Mon, 19 Oct 2020 10:58:36 -0600
From: Mathieu Poirier <mathieu.poirier@...aro.org>
To: Peng Fan <peng.fan@....com>
Cc: bjorn.andersson@...aro.org, o.rempel@...gutronix.de,
robh+dt@...nel.org, linux-remoteproc@...r.kernel.org,
linux-kernel@...r.kernel.org, shawnguo@...nel.org,
s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com,
linux-imx@....com, linux-arm-kernel@...ts.infradead.org,
Richard Zhu <hongxing.zhu@....com>
Subject: Re: [PATCH V2 1/7] remoteproc: elf: support platform specific memory
hook
Hi Peng,
On Sun, Sep 27, 2020 at 02:41:25PM +0800, Peng Fan wrote:
> To arm64, "dc zva, dst" is used in memset.
> Per ARM DDI 0487A.j, chapter C5.3.8 DC ZVA, Data Cache Zero by VA,
>
> "If the memory region being zeroed is any type of Device memory,
> this instruction can give an alignment fault which is prioritized
> in the same way as other alignment faults that are determined
> by the memory type."
>
> On i.MX platforms, when elf is loaded to onchip TCM area, the region
> is ioremapped, so "dc zva, dst" will trigger abort. And ioremap_wc()
> on i.MX not able to write correct data to TCM area.
>
> So we need to use io helpers, and extend the elf loader to support
> platform specific memory functions.
>
> Acked-by: Richard Zhu <hongxing.zhu@....com>
> Signed-off-by: Peng Fan <peng.fan@....com>
> ---
> drivers/remoteproc/remoteproc_elf_loader.c | 20 ++++++++++++++++++--
> include/linux/remoteproc.h | 2 ++
> 2 files changed, 20 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
> index df68d87752e4..6cb71fe47261 100644
> --- a/drivers/remoteproc/remoteproc_elf_loader.c
> +++ b/drivers/remoteproc/remoteproc_elf_loader.c
> @@ -129,6 +129,22 @@ u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
> }
> EXPORT_SYMBOL(rproc_elf_get_boot_addr);
>
> +static void rproc_elf_memcpy(struct rproc *rproc, void *dest, const void *src, size_t count)
> +{
> + if (!rproc->ops->elf_memcpy)
> + memcpy(dest, src, count);
> +
> + rproc->ops->elf_memcpy(rproc, dest, src, count);
> +}
> +
> +static void rproc_elf_memset(struct rproc *rproc, void *s, int c, size_t count)
> +{
> + if (!rproc->ops->elf_memset)
> + memset(s, c, count);
> +
> + rproc->ops->elf_memset(rproc, s, c, count);
> +}
> +
> /**
> * rproc_elf_load_segments() - load firmware segments to memory
> * @rproc: remote processor which will be booted using these fw segments
> @@ -214,7 +230,7 @@ int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
>
> /* put the segment where the remote processor expects it */
> if (filesz)
> - memcpy(ptr, elf_data + offset, filesz);
> + rproc_elf_memcpy(rproc, ptr, elf_data + offset, filesz);
>
> /*
> * Zero out remaining memory for this segment.
> @@ -224,7 +240,7 @@ int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
> * this.
> */
> if (memsz > filesz)
> - memset(ptr + filesz, 0, memsz - filesz);
> + rproc_elf_memset(rproc, ptr + filesz, 0, memsz - filesz);
> }
>
> return ret;
> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> index 2fa68bf5aa4f..1f5fa2c772df 100644
> --- a/include/linux/remoteproc.h
> +++ b/include/linux/remoteproc.h
> @@ -392,6 +392,8 @@ struct rproc_ops {
> int (*load)(struct rproc *rproc, const struct firmware *fw);
> int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
> u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
> + void (*elf_memcpy)(struct rproc *rproc, void *dest, const void *src, size_t count);
> + void (*elf_memset)(struct rproc *rproc, void *s, int c, size_t count);
As with every other operations, the above two addition should be documented.
With that:
Reviewed-by: Mathieu Poirier <mathieu.poirier@...aro.org>
> unsigned long (*panic)(struct rproc *rproc);
> };
>
> --
> 2.28.0
>
Powered by blists - more mailing lists