| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201020235126.1871815-16-fenghua.yu@intel.com>
Date: Tue, 20 Oct 2020 23:51:20 +0000
From: Fenghua Yu <fenghua.yu@...el.com>
To: "Shuah Khan" <shuah@...nel.org>,
"Reinette Chatre" <reinette.chatre@...el.com>,
"Tony Luck" <tony.luck@...el.com>,
"Babu Moger" <babu.moger@....com>,
"James Morse" <james.morse@....com>,
"Borislav Petkov" <bp@...en8.de>,
"Thomas Gleixner" <tglx@...utronix.de>,
"Ravi V Shankar" <ravi.v.shankar@...el.com>
Cc: "linux-kselftest" <linux-kselftest@...r.kernel.org>,
"linux-kernel" <linux-kernel@...r.kernel.org>,
Fenghua Yu <fenghua.yu@...el.com>
Subject: [PATCH v3 15/21] selftests/resctrl: Skip the test if requested resctrl feature is not supported
There could be two reasons why a resctrl feature might not be enabled on
the platform
1. H/W might not support the feature
2. Even if the H/W supports it, the user might have disabled the feature
through kernel command line arguments
Hence, any resctrl unit test (like cmt, cat, mbm and mba) before starting
the test will first check if the feature is enabled on the platform or not.
If the feature isn't enabled, then the test returns with an error status.
For example, if MBA isn't supported on a platform and if the user tries to
run MBA, the output will look like this
ok mounting resctrl to "/sys/fs/resctrl"
not ok MBA: schemata change
But, not supporting a feature isn't a test failure. So, instead of treating
it as an error, use the SKIP directive of the TAP protocol. With the
change, the output will look as below
ok MBA # SKIP Hardware does not support MBA or MBA is disabled
Fixes: 01fee6b4d1f9 ("selftests/resctrl: Add MBA test")
Fixes: ecdbb911f22d ("selftests/resctrl: Add MBM test")
Fixes: 78941183d1b15 ("selftests/resctrl: Add Cache QoS Monitoring (CQM) selftest")
Fixes: 790bf585b0eee ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Suggested-by: Reinette Chatre <reinette.chatre@...el.com>
Signed-off-by: Fenghua Yu <fenghua.yu@...el.com>
---
tools/testing/selftests/resctrl/cat_test.c | 3 ---
tools/testing/selftests/resctrl/cmt_test.c | 3 ---
tools/testing/selftests/resctrl/mba_test.c | 3 ---
tools/testing/selftests/resctrl/mbm_test.c | 3 ---
.../testing/selftests/resctrl/resctrl_tests.c | 24 +++++++++++++++++++
5 files changed, 24 insertions(+), 12 deletions(-)
diff --git a/tools/testing/selftests/resctrl/cat_test.c b/tools/testing/selftests/resctrl/cat_test.c
index 1bce84e23783..a18a37ce626c 100644
--- a/tools/testing/selftests/resctrl/cat_test.c
+++ b/tools/testing/selftests/resctrl/cat_test.c
@@ -132,9 +132,6 @@ int cat_perf_miss_val(int cpu_no, int n, char *cache_type)
if (ret)
return ret;
- if (!validate_resctrl_feature_request("cat"))
- return -1;
-
/* Get default cbm mask for L3/L2 cache */
ret = get_cbm_mask(cache_type);
if (ret)
diff --git a/tools/testing/selftests/resctrl/cmt_test.c b/tools/testing/selftests/resctrl/cmt_test.c
index 282ba7fcf17c..119ae65abec7 100644
--- a/tools/testing/selftests/resctrl/cmt_test.c
+++ b/tools/testing/selftests/resctrl/cmt_test.c
@@ -122,9 +122,6 @@ int cmt_resctrl_val(int cpu_no, int n, char **benchmark_cmd)
if (ret)
return ret;
- if (!validate_resctrl_feature_request("cmt"))
- return -1;
-
ret = get_cbm_mask("L3");
if (ret)
return ret;
diff --git a/tools/testing/selftests/resctrl/mba_test.c b/tools/testing/selftests/resctrl/mba_test.c
index ba0234d4829e..6f09d46a5424 100644
--- a/tools/testing/selftests/resctrl/mba_test.c
+++ b/tools/testing/selftests/resctrl/mba_test.c
@@ -156,9 +156,6 @@ int mba_schemata_change(int cpu_no, char *bw_report, char **benchmark_cmd)
remove(RESULT_FILE_NAME);
- if (!validate_resctrl_feature_request("mba"))
- return -1;
-
ret = resctrl_val(benchmark_cmd, ¶m);
if (ret)
return ret;
diff --git a/tools/testing/selftests/resctrl/mbm_test.c b/tools/testing/selftests/resctrl/mbm_test.c
index ca610c3ebc8c..cb3113cb3b10 100644
--- a/tools/testing/selftests/resctrl/mbm_test.c
+++ b/tools/testing/selftests/resctrl/mbm_test.c
@@ -129,9 +129,6 @@ int mbm_bw_change(int span, int cpu_no, char *bw_report, char **benchmark_cmd)
remove(RESULT_FILE_NAME);
- if (!validate_resctrl_feature_request("mbm"))
- return -1;
-
ret = resctrl_val(benchmark_cmd, ¶m);
if (ret)
return ret;
diff --git a/tools/testing/selftests/resctrl/resctrl_tests.c b/tools/testing/selftests/resctrl/resctrl_tests.c
index be7cd57efca8..a22dc96c0b43 100644
--- a/tools/testing/selftests/resctrl/resctrl_tests.c
+++ b/tools/testing/selftests/resctrl/resctrl_tests.c
@@ -60,6 +60,12 @@ static void run_mbm_test(bool has_ben, char **benchmark_cmd, int span,
int res;
printf("# Starting MBM BW change ...\n");
+
+ if (!validate_resctrl_feature_request("mbm")) {
+ printf("ok MBM # SKIP Hardware does not support MBM or MBM is disabled\n");
+ return;
+ }
+
if (!has_ben)
sprintf(benchmark_cmd[5], "%s", "mba");
res = mbm_bw_change(span, cpu_no, bw_report, benchmark_cmd);
@@ -74,6 +80,12 @@ static void run_mba_test(bool has_ben, char **benchmark_cmd, int span,
int res;
printf("# Starting MBA Schemata change ...\n");
+
+ if (!validate_resctrl_feature_request("mba")) {
+ printf("ok MBA # SKIP Hardware does not support MBA or MBA is disabled\n");
+ return;
+ }
+
if (!has_ben)
sprintf(benchmark_cmd[1], "%d", span);
res = mba_schemata_change(cpu_no, bw_report, benchmark_cmd);
@@ -87,6 +99,12 @@ static void run_cmt_test(bool has_ben, char **benchmark_cmd, int cpu_no)
int res;
printf("# Starting CMT test ...\n");
+
+ if (!validate_resctrl_feature_request("cmt")) {
+ printf("ok CMT # SKIP Hardware does not support CMT or CMT is disabled\n");
+ return;
+ }
+
if (!has_ben)
sprintf(benchmark_cmd[5], "%s", "cmt");
res = cmt_resctrl_val(cpu_no, 5, benchmark_cmd);
@@ -100,6 +118,12 @@ static void run_cat_test(int cpu_no, int no_of_bits)
int res;
printf("# Starting CAT test ...\n");
+
+ if (!validate_resctrl_feature_request("cat")) {
+ printf("ok CAT # SKIP Hardware does not support CAT or CAT is disabled\n");
+ return;
+ }
+
res = cat_perf_miss_val(cpu_no, no_of_bits, "L3");
printf("%sok CAT: test\n", res ? "not " : "");
tests_run++;
--
2.29.0
Powered by blists - more mailing lists