lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201020083310.7489-1-michael.wu@vatics.com>
Date:   Tue, 20 Oct 2020 16:33:10 +0800
From:   Michael Wu <michael.wu@...ics.com>
To:     Jarkko Nikula <jarkko.nikula@...ux.intel.com>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Mika Westerberg <mika.westerberg@...ux.intel.com>,
        <linux-i2c@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC:     Morgan Chang <morgan.chang@...ics.com>,
        Michael Wu <michael.wu@...ics.com>
Subject: [PATCH] i2c: designware: call i2c_dw_read_clear_intrbits_slave() once

i2c_dw_read_clear_intrbits_slave() was called per each interrupt handle.
It caused some interrupt bits which haven't been handled yet were cleared,
the corresponding handlers would do nothing due to interrupt bits been
discarded. For example,

$ i2cset -f -y 2 0x42 0x00 0x41; dmesg -c
[0][clear_intrbits]0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
[1][irq_handler   ]0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
WRITE_RECEIVED
[0][clear_intrbits]0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x714 : INTR_STAT=0x204
[1][irq_handler   ]0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
WRITE_RECEIVED

  t1: ISR with the 1st IC_INTR_RX_FULL.
  t2: Clear listed IC_INTR bits by i2c_dw_read_clear_intrbits_slave().
  t3: Enter i2c_dw_irq_handler_slave() and then do
      i2c_slave_event(WRITE_RECEIVED) because
      if (stat & DW_IC_INTR_RX_FULL).
  t4: ISR with both IC_INTR_STOP_DET and the 2nd IC_INTR_RX_FULL.
  t5: Clear listed IC_INTR bits by i2c_dw_read_clear_intrbits_slave(). The
      current IC_INTR_STOP_DET is cleared by this
      i2c_dw_read_clear_intrbits_slave().
  t6: Enter i2c_dw_irq_handler_slave() and then do
      i2c_slave_event(WRITE_RECEIVED) because
      if (stat & DW_IC_INTR_RX_FULL).
  t7: i2c_slave_event(STOP) never be done because IC_INTR_STOP_DET was
      cleared in t5.

The root cause is that i2c_dw_read_clear_intrbits_slave() was called many
times. Calling i2c_dw_read_clear_intrbits_slave() once in one ISR and take
the returned stat for later handling is the solution.

Signed-off-by: Michael Wu <michael.wu@...ics.com>
---
 drivers/i2c/busses/i2c-designware-slave.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index 44974b53a626..02e7c5171827 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -159,7 +159,6 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 	u32 raw_stat, stat, enabled, tmp;
 	u8 val = 0, slave_activity;
 
-	regmap_read(dev->map, DW_IC_INTR_STAT, &stat);
 	regmap_read(dev->map, DW_IC_ENABLE, &enabled);
 	regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &raw_stat);
 	regmap_read(dev->map, DW_IC_STATUS, &tmp);
@@ -168,13 +167,11 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 	if (!enabled || !(raw_stat & ~DW_IC_INTR_ACTIVITY) || !dev->slave)
 		return 0;
 
+	stat = i2c_dw_read_clear_intrbits_slave(dev);
 	dev_dbg(dev->dev,
 		"%#x STATUS SLAVE_ACTIVITY=%#x : RAW_INTR_STAT=%#x : INTR_STAT=%#x\n",
 		enabled, slave_activity, raw_stat, stat);
 
-	if ((stat & DW_IC_INTR_RX_FULL) && (stat & DW_IC_INTR_STOP_DET))
-		i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_REQUESTED, &val);
-
 	if (stat & DW_IC_INTR_RD_REQ) {
 		if (slave_activity) {
 			if (stat & DW_IC_INTR_RX_FULL) {
@@ -188,11 +185,9 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 						 val);
 				}
 				regmap_read(dev->map, DW_IC_CLR_RD_REQ, &tmp);
-				stat = i2c_dw_read_clear_intrbits_slave(dev);
 			} else {
 				regmap_read(dev->map, DW_IC_CLR_RD_REQ, &tmp);
 				regmap_read(dev->map, DW_IC_CLR_RX_UNDER, &tmp);
-				stat = i2c_dw_read_clear_intrbits_slave(dev);
 			}
 			if (!i2c_slave_event(dev->slave,
 					     I2C_SLAVE_READ_REQUESTED,
@@ -207,7 +202,6 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 			regmap_read(dev->map, DW_IC_CLR_RX_DONE, &tmp);
 
 		i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
-		stat = i2c_dw_read_clear_intrbits_slave(dev);
 		return 1;
 	}
 
@@ -217,10 +211,11 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 		if (!i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_RECEIVED,
 				     &val))
 			dev_vdbg(dev->dev, "Byte %X acked!", val);
-	} else {
+	} else
 		i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
-		stat = i2c_dw_read_clear_intrbits_slave(dev);
-	}
+
+	if ((stat & DW_IC_INTR_RX_FULL) && (stat & DW_IC_INTR_STOP_DET))
+		i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_REQUESTED, &val);
 
 	return 1;
 }
@@ -230,7 +225,6 @@ static irqreturn_t i2c_dw_isr_slave(int this_irq, void *dev_id)
 	struct dw_i2c_dev *dev = dev_id;
 	int ret;
 
-	i2c_dw_read_clear_intrbits_slave(dev);
 	ret = i2c_dw_irq_handler_slave(dev);
 	if (ret > 0)
 		complete(&dev->cmd_complete);
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ