| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAG3jFysUQJXdy0ogK1shbgW1Tmk6DJbS26EaeRPMDEnObQ2_zg@mail.gmail.com>
Date: Tue, 20 Oct 2020 11:02:51 +0200
From: Robert Foss <robert.foss@...aro.org>
To: kholk11@...il.com
Cc: Todor Tomov <todor.too@...il.com>, Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>, marijns95@...il.com,
konradybcio@...il.com, martin.botka1@...il.com,
linux-arm-msm@...r.kernel.org,
linux-media <linux-media@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/6] media: camss: ispif: Correctly reset based on the VFE ID
I found a build issue in this commit.
On Tue, 20 Oct 2020 at 10:59, Robert Foss <robert.foss@...aro.org> wrote:
>
> Nice catch! This patch looks good to me.
>
> Signed-off-by: Robert Foss <robert.foss@...aro.org>
>
> On Sun, 18 Oct 2020 at 14:54, <kholk11@...il.com> wrote:
> >
> > From: AngeloGioacchino Del Regno <kholk11@...il.com>
> >
> > Resetting the ISPIF VFE0 context is wrong if we are using the VFE1
> > for dual-camera or simply because a secondary camera is connected
> > to it: in this case the reset will always happen on the VFE0 ctx
> > of the ISPIF, which is .. useless.
> >
> > Fix this usecase by adding the ISPIF_RST_CMD_1 address and choose
> > where to do the (or what to) reset based on the VFE line id.
> >
> > Signed-off-by: AngeloGioacchino Del Regno <kholk11@...il.com>
> > ---
> > .../media/platform/qcom/camss/camss-ispif.c | 87 ++++++++++++-------
> > .../media/platform/qcom/camss/camss-ispif.h | 2 +-
> > 2 files changed, 57 insertions(+), 32 deletions(-)
> >
> > diff --git a/drivers/media/platform/qcom/camss/camss-ispif.c b/drivers/media/platform/qcom/camss/camss-ispif.c
> > index db94cfd6c508..252db6b33dab 100644
> > --- a/drivers/media/platform/qcom/camss/camss-ispif.c
> > +++ b/drivers/media/platform/qcom/camss/camss-ispif.c
> > @@ -26,6 +26,7 @@
> > #define MSM_ISPIF_NAME "msm_ispif"
> >
> > #define ISPIF_RST_CMD_0 0x008
> > +#define ISPIF_RST_CMD_1 0x00c
> > #define ISPIF_RST_CMD_0_STROBED_RST_EN (1 << 0)
> > #define ISPIF_RST_CMD_0_MISC_LOGIC_RST (1 << 1)
> > #define ISPIF_RST_CMD_0_SW_REG_RST (1 << 2)
> > @@ -179,7 +180,10 @@ static irqreturn_t ispif_isr_8x96(int irq, void *dev)
> > writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
> >
> > if ((value0 >> 27) & 0x1)
> > - complete(&ispif->reset_complete);
> > + complete(&ispif->reset_complete[0]);
> > +
> > + if ((value3 >> 27) & 0x1)
> > + complete(&ispif->reset_complete[1]);
> >
> > if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
> > dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
> > @@ -237,7 +241,7 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev)
> > writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
> >
> > if ((value0 >> 27) & 0x1)
> > - complete(&ispif->reset_complete);
> > + complete(&ispif->reset_complete[0]);
> >
> > if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
> > dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
> > @@ -257,33 +261,17 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev)
> > return IRQ_HANDLED;
> > }
> >
> > -/*
> > - * ispif_reset - Trigger reset on ISPIF module and wait to complete
> > - * @ispif: ISPIF device
> > - *
> > - * Return 0 on success or a negative error code otherwise
> > - */
> > -static int ispif_reset(struct ispif_device *ispif)
> > +static int ispif_vfe_reset(struct ispif_device *ispif, u8 vfe_id)
> > {
> > - unsigned long time;
> > u32 val;
> > - int ret;
> > -
> > - ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0);
> > - if (ret < 0)
> > - return ret;
> >
> > - ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1);
> > - if (ret < 0)
> > - return ret;
> > -
> > - ret = camss_enable_clocks(ispif->nclocks_for_reset,
> > - ispif->clock_for_reset,
> > - to_device(ispif));
> > - if (ret < 0)
> > - return ret;
> > + if (vfe_id > (to_camss(ispif)->vfe_num - 1)) {
> > + dev_err(to_device(ispif),
> > + "Error: asked reset for invalid VFE%d\n", vfe_id);
> > + return -ENOENT;
> > + }
> >
> > - reinit_completion(&ispif->reset_complete);
> > + reinit_completion(&ispif->reset_complete[vfe_id]);
> >
> > val = ISPIF_RST_CMD_0_STROBED_RST_EN |
> > ISPIF_RST_CMD_0_MISC_LOGIC_RST |
> > @@ -303,15 +291,51 @@ static int ispif_reset(struct ispif_device *ispif)
> > ISPIF_RST_CMD_0_RDI_OUTPUT_1_MISR_RST |
> > ISPIF_RST_CMD_0_RDI_OUTPUT_2_MISR_RST;
> >
> > - writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0);
> > + if (vfe_id == 1)
> > + writel_relaxed(val, ispif->base + ISPIF_RST_CMD_1);
> > + else
> > + writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0);
> >
> > - time = wait_for_completion_timeout(&ispif->reset_complete,
> > + time = wait_for_completion_timeout(&ispif->reset_complete[vfe_id],
'time' is not a variable that exists in this scope, so the build fails.
> > msecs_to_jiffies(ISPIF_RESET_TIMEOUT_MS));
> > if (!time) {
> > - dev_err(to_device(ispif), "ISPIF reset timeout\n");
> > - ret = -EIO;
> > + dev_err(to_device(ispif),
> > + "ISPIF for VFE%d reset timeout\n", vfe_id);
> > + return -EIO;
> > }
> >
> > + return 0;
> > +}
> > +
> > +/*
> > + * ispif_reset - Trigger reset on ISPIF module and wait to complete
> > + * @ispif: ISPIF device
> > + *
> > + * Return 0 on success or a negative error code otherwise
> > + */
> > +static int ispif_reset(struct ispif_device *ispif, u8 vfe_id)
> > +{
> > + unsigned long time;
> > + int ret;
> > +
> > + ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ret = camss_enable_clocks(ispif->nclocks_for_reset,
> > + ispif->clock_for_reset,
> > + to_device(ispif));
> > + if (ret < 0)
> > + return ret;
> > +
> > + ret = ispif_vfe_reset(ispif, vfe_id);
> > + if (ret)
> > + dev_dbg(to_device(ispif), "ISPIF Reset failed\n");
> > +
> > camss_disable_clocks(ispif->nclocks_for_reset, ispif->clock_for_reset);
> >
> > camss_pm_domain_off(to_camss(ispif), PM_DOMAIN_VFE0);
> > @@ -355,7 +379,7 @@ static int ispif_set_power(struct v4l2_subdev *sd, int on)
> > goto exit;
> > }
> >
> > - ret = ispif_reset(ispif);
> > + ret = ispif_reset(ispif, line->vfe_id);
> > if (ret < 0) {
> > pm_runtime_put_sync(dev);
> > camss_disable_clocks(ispif->nclocks, ispif->clock);
> > @@ -1192,7 +1216,8 @@ int msm_ispif_subdev_init(struct ispif_device *ispif,
> >
> > mutex_init(&ispif->config_lock);
> >
> > - init_completion(&ispif->reset_complete);
> > + for (i = 0; i < MSM_ISPIF_VFE_NUM; i++)
> > + init_completion(&ispif->reset_complete[i]);
> >
> > return 0;
> > }
> > diff --git a/drivers/media/platform/qcom/camss/camss-ispif.h b/drivers/media/platform/qcom/camss/camss-ispif.h
> > index 1a5ba2425a42..4132174f7ea1 100644
> > --- a/drivers/media/platform/qcom/camss/camss-ispif.h
> > +++ b/drivers/media/platform/qcom/camss/camss-ispif.h
> > @@ -56,7 +56,7 @@ struct ispif_device {
> > int nclocks;
> > struct camss_clock *clock_for_reset;
> > int nclocks_for_reset;
> > - struct completion reset_complete;
> > + struct completion reset_complete[MSM_ISPIF_VFE_NUM];
> > int power_count;
> > struct mutex power_lock;
> > struct ispif_intf_cmd_reg intf_cmd[MSM_ISPIF_VFE_NUM];
> > --
> > 2.28.0
> >
Powered by blists - more mailing lists