| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20201020132037.GB25784@e121166-lin.cambridge.arm.com>
Date: Tue, 20 Oct 2020 14:20:37 +0100
From: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
To: Vidya Sagar <vidyas@...dia.com>
Cc: jingoohan1@...il.com, gustavo.pimentel@...opsys.com,
bhelgaas@...gle.com, amurray@...goodpenguin.co.uk, robh@...nel.org,
treding@...dia.com, jonathanh@...dia.com,
linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
kthota@...dia.com, mmaddireddy@...dia.com, sagar.tv@...il.com
Subject: Re: [PATCH] PCI: dwc: Use ATU regions to map memory regions
On Mon, Oct 19, 2020 at 11:21:54AM +0530, Vidya Sagar wrote:
> Hi Lorenzo, Rob, Gustavo,
> Could you please review this change?
Next cycle - we are in the middle of the merge window and I am not
queueing any more patches.
Thanks,
Lorenzo
> Thanks,
> Vidya Sagar
>
> On 10/5/2020 5:43 PM, Vidya Sagar wrote:
> > Use ATU region-3 and region-0 to setup mapping for prefetchable and
> > non-prefetchable memory regions respectively only if their respective CPU
> > and bus addresses are different.
> >
> > Signed-off-by: Vidya Sagar <vidyas@...dia.com>
> > ---
> > .../pci/controller/dwc/pcie-designware-host.c | 44 ++++++++++++++++---
> > drivers/pci/controller/dwc/pcie-designware.c | 12 ++---
> > drivers/pci/controller/dwc/pcie-designware.h | 4 +-
> > 3 files changed, 48 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> > index 317ff512f8df..cefde8e813e9 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> > @@ -515,9 +515,40 @@ static struct pci_ops dw_pcie_ops = {
> > .write = pci_generic_config_write,
> > };
> > +static void dw_pcie_setup_mem_atu(struct pcie_port *pp,
> > + struct resource_entry *win)
> > +{
> > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > +
> > + if (win->res->flags & IORESOURCE_PREFETCH && pci->num_viewport >= 4 &&
> > + win->offset) {
> > + dw_pcie_prog_outbound_atu(pci,
> > + PCIE_ATU_REGION_INDEX3,
> > + PCIE_ATU_TYPE_MEM,
> > + win->res->start,
> > + win->res->start - win->offset,
> > + resource_size(win->res));
> > + } else if (win->res->flags & IORESOURCE_PREFETCH &&
> > + pci->num_viewport < 4) {
> > + dev_warn(pci->dev,
> > + "Insufficient ATU regions to map Prefetchable memory\n");
> > + } else if (win->offset) {
> > + if (upper_32_bits(resource_size(win->res)))
> > + dev_warn(pci->dev,
> > + "Memory resource size exceeds max for 32 bits\n");
> > + dw_pcie_prog_outbound_atu(pci,
> > + PCIE_ATU_REGION_INDEX0,
> > + PCIE_ATU_TYPE_MEM,
> > + win->res->start,
> > + win->res->start - win->offset,
> > + resource_size(win->res));
> > + }
> > +}
> > +
> > void dw_pcie_setup_rc(struct pcie_port *pp)
> > {
> > u32 val, ctrl, num_ctrls;
> > + struct resource_entry *win;
> > struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > /*
> > @@ -572,13 +603,14 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
> > * ATU, so we should not program the ATU here.
> > */
> > if (pp->bridge->child_ops == &dw_child_pcie_ops) {
> > - struct resource_entry *entry =
> > - resource_list_first_type(&pp->bridge->windows, IORESOURCE_MEM);
> > + resource_list_for_each_entry(win, &pp->bridge->windows) {
> > + switch (resource_type(win->res)) {
> > + case IORESOURCE_MEM:
> > + dw_pcie_setup_mem_atu(pp, win);
> > + break;
> > + }
> > + }
> > - dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX0,
> > - PCIE_ATU_TYPE_MEM, entry->res->start,
> > - entry->res->start - entry->offset,
> > - resource_size(entry->res));
> > if (pci->num_viewport > 2)
> > dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX2,
> > PCIE_ATU_TYPE_IO, pp->io_base,
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> > index 3c1f17c78241..6033689abb15 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > @@ -227,7 +227,7 @@ static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg,
> > static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no,
> > int index, int type,
> > u64 cpu_addr, u64 pci_addr,
> > - u32 size)
> > + u64 size)
> > {
> > u32 retries, val;
> > u64 limit_addr = cpu_addr + size - 1;
> > @@ -244,8 +244,10 @@ static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no,
> > lower_32_bits(pci_addr));
> > dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
> > upper_32_bits(pci_addr));
> > - dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
> > - type | PCIE_ATU_FUNC_NUM(func_no));
> > + val = type | PCIE_ATU_FUNC_NUM(func_no);
> > + val = upper_32_bits(size - 1) ?
> > + val | PCIE_ATU_INCREASE_REGION_SIZE : val;
> > + dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, val);
> > dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
> > PCIE_ATU_ENABLE);
> > @@ -266,7 +268,7 @@ static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no,
> > static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no,
> > int index, int type, u64 cpu_addr,
> > - u64 pci_addr, u32 size)
> > + u64 pci_addr, u64 size)
> > {
> > u32 retries, val;
> > @@ -310,7 +312,7 @@ static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no,
> > }
> > void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
> > - u64 cpu_addr, u64 pci_addr, u32 size)
> > + u64 cpu_addr, u64 pci_addr, u64 size)
> > {
> > __dw_pcie_prog_outbound_atu(pci, 0, index, type,
> > cpu_addr, pci_addr, size);
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> > index 97c7063b9e89..b81a1813cf9e 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > @@ -80,10 +80,12 @@
> > #define PCIE_ATU_VIEWPORT 0x900
> > #define PCIE_ATU_REGION_INBOUND BIT(31)
> > #define PCIE_ATU_REGION_OUTBOUND 0
> > +#define PCIE_ATU_REGION_INDEX3 0x3
> > #define PCIE_ATU_REGION_INDEX2 0x2
> > #define PCIE_ATU_REGION_INDEX1 0x1
> > #define PCIE_ATU_REGION_INDEX0 0x0
> > #define PCIE_ATU_CR1 0x904
> > +#define PCIE_ATU_INCREASE_REGION_SIZE BIT(13)
> > #define PCIE_ATU_TYPE_MEM 0x0
> > #define PCIE_ATU_TYPE_IO 0x2
> > #define PCIE_ATU_TYPE_CFG0 0x4
> > @@ -295,7 +297,7 @@ void dw_pcie_upconfig_setup(struct dw_pcie *pci);
> > int dw_pcie_wait_for_link(struct dw_pcie *pci);
> > void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
> > int type, u64 cpu_addr, u64 pci_addr,
> > - u32 size);
> > + u64 size);
> > void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> > int type, u64 cpu_addr, u64 pci_addr,
> > u32 size);
> >
Powered by blists - more mailing lists