| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20201020171221.730-4-dmurphy@ti.com>
Date: Tue, 20 Oct 2020 12:12:21 -0500
From: Dan Murphy <dmurphy@...com>
To: <davem@...emloft.net>, <andrew@...n.ch>, <f.fainelli@...il.com>,
<hkallweit1@...il.com>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Dan Murphy <dmurphy@...com>
Subject: [PATCH net-next v2 3/3] net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY
The DP83TD510E is an ultra-low power Ethernet physical layer transceiver
that supports 10M single pair cable.
The device supports both 2.4-V p2p and 1-V p2p output voltage as defined
by IEEE 802.3cg 10Base-T1L specfications. These modes can be forced via
the device tree or the device is defaulted to auto negotiation to
determine the proper p2p voltage.
Signed-off-by: Dan Murphy <dmurphy@...com>
---
drivers/net/phy/Kconfig | 6 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/dp83td510.c | 600 ++++++++++++++++++++++++++++++++++++
3 files changed, 607 insertions(+)
create mode 100644 drivers/net/phy/dp83td510.c
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 698bea312adc..017252e1504c 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -302,6 +302,12 @@ config DP83869_PHY
Currently supports the DP83869 PHY. This PHY supports copper and
fiber connections.
+config DP83TD510_PHY
+ tristate "Texas Instruments DP83TD510 10M Single Pair Ethernet PHY"
+ help
+ Support for the DP83TD510 Ethernet PHY. This PHY supports a 10M single
+ pair Ethernet connection.
+
config VITESSE_PHY
tristate "Vitesse PHYs"
help
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index a13e402074cf..bf62ce211eb4 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_DP83848_PHY) += dp83848.o
obj-$(CONFIG_DP83867_PHY) += dp83867.o
obj-$(CONFIG_DP83869_PHY) += dp83869.o
obj-$(CONFIG_DP83TC811_PHY) += dp83tc811.o
+obj-$(CONFIG_DP83TD510_PHY) += dp83td510.o
obj-$(CONFIG_FIXED_PHY) += fixed_phy.o
obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o
diff --git a/drivers/net/phy/dp83td510.c b/drivers/net/phy/dp83td510.c
new file mode 100644
index 000000000000..756497c592bc
--- /dev/null
+++ b/drivers/net/phy/dp83td510.c
@@ -0,0 +1,600 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Driver for the Texas Instruments DP83TD510 PHY
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <linux/ethtool.h>
+#include <linux/etherdevice.h>
+#include <linux/kernel.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+
+#define DP83TD510E_PHY_ID 0x20000180
+#define DP83TD510_DEVADDR_AN 0x7
+#define DP83TD510_DEVADDR 0x1f
+
+#define DP83TD510_MII_REG 0x0
+#define DP83TD510_PHY_STAT 0x10
+#define DP83TD510_GEN_CFG 0x11
+#define DP83TD510_INT_REG1 0x12
+#define DP83TD510_INT_REG2 0x13
+#define DP83TD510_MAC_CFG_1 0x17
+
+#define DP83TD510_SOR_1 0x467
+
+#define DP83TD510_HW_RESET BIT(15)
+#define DP83TD510_SW_RESET BIT(14)
+
+/* GEN CFG bits */
+#define DP83TD510_INT_OE BIT(0)
+#define DP83TD510_INT_EN BIT(1)
+
+/* INT REG 1 bits */
+#define DP83TD510_INT1_ESD_EN BIT(3)
+#define DP83TD510_INT1_LINK_EN BIT(5)
+#define DP83TD510_INT1_RHF_EN BIT(7)
+#define DP83TD510_INT1_ESD BIT(11)
+#define DP83TD510_INT1_LINK BIT(13)
+#define DP83TD510_INT1_RHF BIT(15)
+
+/* INT REG 2 bits */
+#define DP83TD510_INT2_POR_EN BIT(0)
+#define DP83TD510_INT2_POL_EN BIT(1)
+#define DP83TD510_INT2_PAGE_EN BIT(5)
+#define DP83TD510_INT2_POR BIT(8)
+#define DP83TD510_INT2_POL BIT(9)
+#define DP83TD510_INT2_PAGE BIT(13)
+
+/* MAC CFG bits */
+#define DP83TD510_RX_CLK_SHIFT BIT(12)
+#define DP83TD510_TX_CLK_SHIFT BIT(11)
+
+#define DP83TD510_MASTER_MODE BIT(2)
+#define DP83TD510_2_4V BIT(7)
+#define DP83TD510_RGMII BIT(8)
+
+#define DP83TD510_FIFO_DEPTH_MASK GENMASK(6, 5)
+#define DP83TD510_FIFO_DEPTH_4_B_NIB 0
+#define DP83TD510_FIFO_DEPTH_5_B_NIB BIT(5)
+#define DP83TD510_FIFO_DEPTH_6_B_NIB BIT(6)
+#define DP83TD510_FIFO_DEPTH_8_B_NIB (BIT(5) | BIT(6))
+
+enum dp83td510_mode_config {
+ DP83TD510_AUTO_NEG = 0,
+ DP83TD510_MASTER_1 = 1,
+ DP83TD510_MASTER_24 = 2,
+ DP83TD510_SLAVE_1 = 3,
+ DP83TD510_SLAVE_24 = 4,
+};
+
+const int dp83td510_feature_array[3] = {
+ ETHTOOL_LINK_MODE_10baseT1L_Half_BIT,
+ ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
+ ETHTOOL_LINK_MODE_TP_BIT,
+};
+
+struct dp83td510_private {
+ u32 forced_mode;
+ u32 tx_fifo_depth;
+ u32 rgmii_delay;
+ bool is_rgmii;
+};
+
+struct dp83td510_init_reg {
+ int reg;
+ int val;
+};
+
+static struct dp83td510_init_reg dp83td510_master_1_0[] = {
+ { 0x000d, 0x0007 }, /* disable auto-neg */
+ { 0x000e, 0x0200 },
+ { 0x000d, 0x4007 },
+ { 0x000e, 0x0000 },
+ { 0x000d, 0x0001 }, /* force master mode */
+ { 0x000e, 0x0834 },
+ { 0x000d, 0x4001 },
+ { 0x000e, 0x4000 },
+ { 0x000d, 0x0001 }, /* force 1.0v swing */
+ { 0x000e, 0x08f6 },
+ { 0x000d, 0x4001 },
+ { 0x000e, 0x0000 },
+ { 0x0608, 0x003b }, /* disable_0_transition */
+ { 0x0862, 0x39f8 }, /* AGC Gain during Autoneg */
+ { 0x081a, 0x67c0 }, /* deq offset for 1V swing */
+ { 0x081c, 0xfb62 }, /* deq offset for 2.4V swing */
+ { 0x0830, 0x05a3 }, /* Enable energy lost fallback */
+ { 0x0855, 0x1b55 }, /* MSE Threshold change */
+ { 0x0831, 0x0403 }, /* energy detect threshold */
+ { 0x0856, 0x1800 }, /* good1 MSE threshold change */
+ { 0x0857, 0x8fa0 }, /* Enable fallback to phase 1 on watchdog trigger */
+ { 0x0871, 0x000c }, /* TED input changed to slicer_in without FFE */
+ { 0x0883, 0x022e }, /* Enable Rx Filter, Change PGA threshold for Short Cable detection */
+ { 0x0402, 0x1800 }, /* Adjusr LD swing */
+ { 0x0878, 0x2248 }, /* Change PI up/down polarity */
+ { 0x010c, 0x0008 }, /* tx filter coefficient */
+ { 0x0112, 0x1212 }, /* tx filter scaling factor */
+ { 0x0809, 0x5c80 }, /* AGC retrain */
+ { 0x0803, 0x1529 }, /* Master Ph1 Back-off */
+ { 0x0804, 0x1a33 }, /* Master Ph1 Back-off */
+ { 0x0805, 0x1f3d }, /* Master Ph1 Back-off */
+ { 0x0850, 0x045b }, /* hybrid gain & delay */
+ { 0x0874, 0x6967 }, /* kp step 0 for master */
+ { 0x0852, 0x7800 }, /* FAGC init gain */
+ { 0x0806, 0x1e1e }, /* Master/Slave Ph2 Back-off */
+ { 0x0807, 0x2525 }, /* Master/Slave Ph2 Back-off */
+ { 0x0808, 0x2c2c }, /* Master/Slave Ph2 Back-off */
+ { 0x0850, 0x0590 }, /* Hybrid Gain/Delay Code */
+ { 0x0827, 0x4000 }, /* Echo Fixed Delay */
+ { 0x0849, 0x0fe4 }, /* Hybrid Cal enable */
+ { 0x084b, 0x04b5 }, /* Echo Score Sel */
+ { 0x0018, 0x0043 }, /* Set CRS/RX_DV pin as RX_DV for RMII repeater mode */
+};
+
+static struct dp83td510_init_reg dp83td510_slave_1_0[] = {
+ { 0x000d, 0x0007 }, /* disable auto-neg */
+ { 0x000e, 0x0200 },
+ { 0x000d, 0x4007 },
+ { 0x000e, 0x0000 },
+ { 0x000d, 0x0001 }, /* force slave mode */
+ { 0x000e, 0x0834 },
+ { 0x000d, 0x4001 },
+ { 0x000e, 0x0000 },
+ { 0x000d, 0x0001 }, /* force 1.0v swing */
+ { 0x000d, 0x4001 },
+ { 0x000e, 0x0000 },
+ { 0x0608, 0x003b }, /* disable_0_transition */
+ { 0x0862, 0x39f8 }, /* AGC Gain during Autoneg */
+ { 0x081a, 0x67c0 }, /* deq offset for 1V swing */
+ { 0x081c, 0xfb62 }, /* deq offset for 2.4V swing */
+ { 0x0830, 0x05a3 }, /* Enable energy lost fallback */
+ { 0x0855, 0x1b55 }, /* MSE Threshold change */
+ { 0x0831, 0x0403 }, /* energy detect threshold */
+ { 0x0856, 0x1800 }, /* good1 MSE threshold change */
+ { 0x0857, 0x8fa0 }, /* Enable fallback to phase 1 on watchdog trigger */
+ { 0x0871, 0x000c }, /* TED input changed to slicer_in without FFE */
+ { 0x0883, 0x022e }, /* Enable Rx Filter, PGA threshold for Short Cable detection */
+ { 0x0402, 0x1800 }, /* Adjusr LD swing */
+ { 0x0878, 0x2248 }, /* Change PI up/down polarity */
+ { 0x010c, 0x0008 }, /* tx filter coefficient */
+ { 0x0112, 0x1212 }, /* tx filter scaling factor */
+ { 0x0809, 0x5c80 }, /* AGC retrain */
+ { 0x0803, 0x1529 }, /* Master Ph1 Back-off */
+ { 0x0804, 0x1a33 }, /* Master Ph1 Back-off */
+ { 0x0805, 0x1f3d }, /* Master Ph1 Back-off */
+ { 0x0850, 0x045b }, /* hybrid gain & delay */
+ { 0x0874, 0x6967 }, /* kp step 0 for master */
+ { 0x0852, 0x7800 }, /* FAGC init gain */
+ { 0x0806, 0x1e1e }, /* Master/Slave Ph2 Back-off */
+ { 0x0807, 0x2525 }, /* Master/Slave Ph2 Back-off */
+ { 0x0808, 0x2c2c }, /* Master/Slave Ph2 Back-off */
+ { 0x0850, 0x0590 }, /* Hybrid Gain/Delay Code */
+ { 0x0827, 0x4000 }, /* Echo Fixed Delay */
+ { 0x0849, 0x0fe4 }, /* Hybrid Cal enable */
+ { 0x084b, 0x04b5 }, /* Echo Score Sel */
+ { 0x0018, 0x0043 }, /* Set CRS/RX_DV pin as RX_DV for RMII repeater mode */
+};
+
+static struct dp83td510_init_reg dp83td510_master_2_4[] = {
+ { 0x000d, 0x0007 }, /* disable auto-neg */
+ { 0x000e, 0x0200 },
+ { 0x000d, 0x4007 },
+ { 0x000e, 0x0000 },
+ { 0x000d, 0x0001 }, /* force Master mode */
+ { 0x000e, 0x0834 },
+ { 0x000d, 0x4001 },
+ { 0x000e, 0x4000 },
+ { 0x000d, 0x0001 }, /* force 2.4v swing */
+ { 0x000e, 0x08f6 },
+ { 0x000d, 0x4001 },
+ { 0x000e, 0x1000 },
+ { 0x0608, 0x003b }, /* disable_0_transition */
+ { 0x0862, 0x39f8 }, /* AGC Gain during Autoneg */
+ { 0x081a, 0x67c0 }, /* deq offset for 1V swing */
+ { 0x081c, 0xfb62 }, /* deq offset for 2.4V swing */
+ { 0x0830, 0x05a3 }, /* Enable energy lost fallback */
+ { 0x0855, 0x1b55 }, /* MSE Threshold change */
+ { 0x0831, 0x0403 }, /* energy detect threshold */
+ { 0x0856, 0x1800 }, /* good1 MSE threshold change */
+ { 0x0857, 0x8fa0 }, /* Enable fallback to phase 1 on watchdog trigger */
+ { 0x0871, 0x000c }, /* TED input changed to slicer_in without FFE */
+ { 0x0883, 0x022e }, /* Enable Rx Filter, Change PGA threshold for Short Cable detection */
+ { 0x0402, 0x1800 }, /* Adjusr LD swing */
+ { 0x0878, 0x2248 }, /* Change PI up/down polarity */
+ { 0x010c, 0x0008 }, /* tx filter coefficient */
+ { 0x0112, 0x1212 }, /* tx filter scaling factor */
+ { 0x0809, 0x5c80 }, /* AGC retrain */
+ { 0x0803, 0x1529 }, /* Master Ph1 Back-off */
+ { 0x0804, 0x1a33 }, /* Master Ph1 Back-off */
+ { 0x0805, 0x1f3d }, /* Master Ph1 Back-off */
+ { 0x0850, 0x045b }, /* hybrid gain & delay */
+ { 0x0874, 0x6967 }, /* kp step 0 for master */
+ { 0x0852, 0x7800 }, /* FAGC init gain */
+ { 0x0806, 0x1e1e }, /* Master/Slave Ph2 Back-off */
+ { 0x0807, 0x2525 }, /* Master/Slave Ph2 Back-off */
+ { 0x0808, 0x2c2c }, /* Master/Slave Ph2 Back-off */
+ { 0x0850, 0x0590 }, /* Hybrid Gain/Delay Code */
+ { 0x0827, 0x4000 }, /* Echo Fixed Delay */
+ { 0x0849, 0x0fe4 }, /* Hybrid Cal enable */
+ { 0x084b, 0x04b5 }, /* Echo Score Sel */
+ { 0x0018, 0x0043 }, /* Set CRS/RX_DV pin as RX_DV for RMII repeater mode */
+};
+
+static struct dp83td510_init_reg dp83td510_slave_2_4[] = {
+ { 0x000d, 0x0007}, /* disable auto-neg */
+ { 0x000e, 0x0200},
+ { 0x000d, 0x4007},
+ { 0x000e, 0x0000},
+ { 0x000d, 0x0001}, /* force slave mode */
+ { 0x000e, 0x0834},
+ { 0x000d, 0x4001},
+ { 0x000e, 0x0000},
+ { 0x000d, 0x0001}, /* force 2.4v swing */
+ { 0x000e, 0x08f6},
+ { 0x000d, 0x4001},
+ { 0x000e, 0x1000},
+ { 0x0608, 0x003b}, /* disable_0_transition */
+ { 0x0862, 0x39f8}, /* AGC Gain during Autoneg */
+ { 0x081a, 0x67c0}, /* deq offset for 1V swing */
+ { 0x081c, 0xfb62}, /* deq offset for 2.4V swing */
+ { 0x0830, 0x05a3}, /* Enable energy lost fallback */
+ { 0x0855, 0x1b55}, /* MSE Threshold change */
+ { 0x0831, 0x0403}, /* energy detect threshold */
+ { 0x0856, 0x1800}, /* good1 MSE threshold change */
+ { 0x0857, 0x8fa0}, /* Enable fallback to phase 1 on watchdog trigger */
+ { 0x0871, 0x000c}, /* TED input changed to slicer_in without FFE */
+ { 0x0883, 0x022e}, /* Enable Rx Filter, Change PGA threshold for Short Cable detection */
+ { 0x0402, 0x1800}, /* Adjusr LD swing */
+ { 0x0878, 0x2248}, /* Change PI up/down polarity */
+ { 0x010c, 0x0008}, /* tx filter coefficient */
+ { 0x0112, 0x1212}, /* tx filter scaling factor */
+ { 0x0809, 0x5c80}, /* AGC retrain */
+ { 0x0803, 0x1529}, /* Master Ph1 Back-off */
+ { 0x0804, 0x1a33}, /* Master Ph1 Back-off */
+ { 0x0805, 0x1f3d}, /* Master Ph1 Back-off */
+ { 0x0850, 0x045b}, /* hybrid gain & delay */
+ { 0x0874, 0x6967}, /* kp step 0 for master */
+ { 0x0852, 0x7800}, /* FAGC init gain */
+ { 0x0806, 0x1e1e}, /* Master/Slave Ph2 Back-off */
+ { 0x0807, 0x2525}, /* Master/Slave Ph2 Back-off */
+ { 0x0808, 0x2c2c}, /* Master/Slave Ph2 Back-off */
+ { 0x0850, 0x0590}, /* Hybrid Gain/Delay Code */
+ { 0x0827, 0x4000}, /* Echo Fixed Delay */
+ { 0x0849, 0x0fe4}, /* Hybrid Cal enable */
+ { 0x084b, 0x04b5}, /* Echo Score Sel */
+ { 0x0018, 0x0043}, /* Set CRS/RX_DV pin as RX_DV for RMII repeater mode */
+};
+
+static struct dp83td510_init_reg dp83td510_auto_neg[] = {
+ { 0x608, 0x003b }, /* disable_0_transition */
+ { 0x862, 0x39f8 }, /* AGC Gain during Autoneg */
+ { 0x81a, 0x67c0 }, /* deq offset for 1V swing */
+ { 0x81c, 0xfb62 }, /* deq offset for 2.4V swing */
+ { 0x830, 0x05a3 }, /* Enable energy lost fallback */
+ { 0x855, 0x1b55 }, /* MSE Threshold change */
+ { 0x831, 0x0403 }, /* energy detect threshold */
+ { 0x856, 0x1800 }, /* good1 MSE threshold change */
+ { 0x857, 0x8fa0 }, /* Enable fallback to phase 1 on watchdog trigger */
+ { 0x871, 0x000c }, /* TED input changed to slicer_in without FFE */
+ { 0x883, 0x022e }, /* Enable Rx Filter Change PGA threshold for Short Cable detection */
+ { 0x402, 0x1800 }, /* Adjusr LD swing */
+ { 0x878, 0x2248 }, /* Change PI up/down polarity */
+ { 0x10c, 0x0008 }, /* tx filter coefficient */
+ { 0x112, 0x1212 }, /* tx filter scaling factor */
+ { 0x809, 0x5c80 }, /* AGC retrain */
+ { 0x803, 0x1529 }, /* Master Ph1 Back-off */
+ { 0x804, 0x1a33 }, /* Master Ph1 Back-off */
+ { 0x805, 0x1f3d }, /* Master Ph1 Back-off */
+ { 0x850, 0x045b }, /* hybrid gain & delay */
+ { 0x874, 0x6967 }, /* kp step 0 for master */
+ { 0x852, 0x7800 }, /* FAGC init gain */
+ { 0x806, 0x1e1e }, /* Master/Slave Ph2 Back-off */
+ { 0x807, 0x2525 }, /* Master/Slave Ph2 Back-off */
+ { 0x808, 0x2c2c }, /* Master/Slave Ph2 Back-off */
+ { 0x850, 0x0590 }, /* Hybrid Gain/Delay Code */
+ { 0x827, 0x4000 }, /* Echo Fixed Delay */
+ { 0x849, 0x0fe4 }, /* Hybrid Cal enable */
+ { 0x84b, 0x04b5 }, /* Echo Score Sel */
+ { 0x018, 0x0043 }, /* Set CRS/RX_DV pin as RX_DV for RMII repeater mode */
+};
+
+static int dp83td510_ack_interrupt(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_read(phydev, DP83TD510_INT_REG1);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_read(phydev, DP83TD510_INT_REG2);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int dp83td510_config_intr(struct phy_device *phydev)
+{
+ int int_status;
+ int gen_cfg_val;
+ int ret;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ int_status = phy_read(phydev, DP83TD510_INT_REG1);
+ if (int_status < 0)
+ return int_status;
+
+ int_status = (DP83TD510_INT1_ESD_EN | DP83TD510_INT1_LINK_EN |
+ DP83TD510_INT1_RHF_EN);
+
+ ret = phy_write(phydev, DP83TD510_INT_REG1, int_status);
+ if (ret)
+ return ret;
+
+ int_status = phy_read(phydev, DP83TD510_INT_REG2);
+ if (int_status < 0)
+ return int_status;
+
+ int_status = (DP83TD510_INT2_POR | DP83TD510_INT2_POL |
+ DP83TD510_INT2_PAGE);
+
+ ret = phy_write(phydev, DP83TD510_INT_REG2, int_status);
+ if (ret)
+ return ret;
+
+ gen_cfg_val = phy_read(phydev, DP83TD510_GEN_CFG);
+ if (gen_cfg_val < 0)
+ return gen_cfg_val;
+
+ gen_cfg_val |= DP83TD510_INT_OE | DP83TD510_INT_EN;
+
+ } else {
+ ret = phy_write(phydev, DP83TD510_INT_REG1, 0);
+ if (ret)
+ return ret;
+
+ ret = phy_write(phydev, DP83TD510_INT_REG2, 0);
+ if (ret)
+ return ret;
+
+ gen_cfg_val = phy_read(phydev, DP83TD510_GEN_CFG);
+ if (gen_cfg_val < 0)
+ return gen_cfg_val;
+
+ gen_cfg_val &= ~DP83TD510_INT_EN;
+ }
+
+ return phy_write(phydev, DP83TD510_GEN_CFG, gen_cfg_val);
+}
+
+static int dp83td510_configure_mode(struct phy_device *phydev)
+{
+ struct dp83td510_private *dp83td510 = phydev->priv;
+ struct dp83td510_init_reg *init_data;
+ int size;
+ int ret;
+ int i;
+
+ ret = phy_set_bits(phydev, DP83TD510_MII_REG, DP83TD510_HW_RESET);
+ if (ret < 0)
+ return ret;
+
+ switch (dp83td510->forced_mode) {
+ case DP83TD510_MASTER_1:
+ size = ARRAY_SIZE(dp83td510_master_1_0);
+ init_data = dp83td510_master_1_0;
+ break;
+ case DP83TD510_MASTER_24:
+ size = ARRAY_SIZE(dp83td510_master_2_4);
+ init_data = dp83td510_master_2_4;
+ break;
+ case DP83TD510_SLAVE_1:
+ size = ARRAY_SIZE(dp83td510_slave_1_0);
+ init_data = dp83td510_slave_1_0;
+ break;
+ case DP83TD510_SLAVE_24:
+ size = ARRAY_SIZE(dp83td510_slave_2_4);
+ init_data = dp83td510_slave_2_4;
+ break;
+ case DP83TD510_AUTO_NEG:
+ default:
+ size = ARRAY_SIZE(dp83td510_auto_neg);
+ init_data = dp83td510_auto_neg;
+ break;
+ };
+
+ for (i = 0; i < size; i++) {
+ ret = phy_write_mmd(phydev, DP83TD510_DEVADDR, init_data[i].reg,
+ init_data[i].val);
+ if (ret)
+ return ret;
+ }
+
+ return phy_set_bits(phydev, DP83TD510_MII_REG, DP83TD510_SW_RESET);
+}
+
+static int dp83td510_get_features(struct phy_device *phydev)
+{
+ struct dp83td510_private *dp83td510 = phydev->priv;
+
+ linkmode_set_bit_array(dp83td510_feature_array,
+ ARRAY_SIZE(dp83td510_feature_array),
+ phydev->supported);
+
+ if (dp83td510->forced_mode == DP83TD510_AUTO_NEG)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
+
+ return 0;
+}
+
+static int dp83td510_config_init(struct phy_device *phydev)
+{
+ struct dp83td510_private *dp83td510 = phydev->priv;
+ int ret = 0;
+
+ if (phy_interface_is_rgmii(phydev)) {
+ if (dp83td510->rgmii_delay) {
+ ret = phy_set_bits_mmd(phydev, DP83TD510_DEVADDR,
+ DP83TD510_MAC_CFG_1, dp83td510->rgmii_delay);
+ if (ret)
+ return ret;
+ }
+ }
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RMII) {
+ ret = phy_modify(phydev, DP83TD510_GEN_CFG,
+ DP83TD510_FIFO_DEPTH_MASK,
+ dp83td510->tx_fifo_depth);
+ if (ret)
+ return ret;
+ }
+
+ return dp83td510_configure_mode(phydev);
+}
+
+static int dp83td510_phy_reset(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_set_bits(phydev, DP83TD510_MII_REG, DP83TD510_SW_RESET);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(10, 20);
+
+ return dp83td510_config_init(phydev);
+}
+
+static int dp83td510_read_straps(struct phy_device *phydev)
+{
+ struct dp83td510_private *dp83td510 = phydev->priv;
+ int strap;
+
+ strap = phy_read_mmd(phydev, DP83TD510_DEVADDR, DP83TD510_SOR_1);
+ if (strap < 0)
+ return strap;
+
+ if (strap & DP83TD510_RGMII)
+ dp83td510->is_rgmii = true;
+
+ return 0;
+};
+
+#if IS_ENABLED(CONFIG_OF_MDIO)
+static int dp83td510_of_init(struct phy_device *phydev)
+{
+ struct dp83td510_private *dp83td510 = phydev->priv;
+ struct device *dev = &phydev->mdio.dev;
+ struct device_node *of_node = dev->of_node;
+ s32 rx_int_delay;
+ s32 tx_int_delay;
+ int ret;
+
+ if (!of_node)
+ return -ENODEV;
+
+ ret = dp83td510_read_straps(phydev);
+ if (ret)
+ return ret;
+
+ ret = device_property_read_u32(&phydev->mdio.dev, "ti,master-slave-mode",
+ &dp83td510->forced_mode);
+ if (ret)
+ dp83td510->forced_mode = DP83TD510_AUTO_NEG;
+
+ if (dp83td510->forced_mode < DP83TD510_AUTO_NEG ||
+ dp83td510->forced_mode > DP83TD510_SLAVE_24)
+ return -EINVAL;
+
+ if (device_property_read_u32(&phydev->mdio.dev, "tx-fifo-depth",
+ &dp83td510->tx_fifo_depth))
+ dp83td510->tx_fifo_depth = DP83TD510_FIFO_DEPTH_5_B_NIB;
+
+ switch (dp83td510->tx_fifo_depth) {
+ case 4:
+ dp83td510->tx_fifo_depth = DP83TD510_FIFO_DEPTH_4_B_NIB;
+ break;
+ case 5:
+ dp83td510->tx_fifo_depth = DP83TD510_FIFO_DEPTH_5_B_NIB;
+ break;
+ case 6:
+ dp83td510->tx_fifo_depth = DP83TD510_FIFO_DEPTH_6_B_NIB;
+ break;
+ case 8:
+ dp83td510->tx_fifo_depth = DP83TD510_FIFO_DEPTH_8_B_NIB;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ rx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0, true);
+ if (rx_int_delay <= 0)
+ dp83td510->rgmii_delay = DP83TD510_RX_CLK_SHIFT;
+ else
+ dp83td510->rgmii_delay = 0;
+
+ tx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0, false);
+ if (tx_int_delay <= 0)
+ dp83td510->rgmii_delay |= DP83TD510_TX_CLK_SHIFT;
+ else
+ dp83td510->rgmii_delay &= ~DP83TD510_TX_CLK_SHIFT;
+
+ return ret;
+}
+#else
+static int dp83869_of_init(struct phy_device *phydev)
+{
+ return dp83td510_read_straps(phydev);
+}
+#endif /* CONFIG_OF_MDIO */
+
+static int dp83td510_probe(struct phy_device *phydev)
+{
+ struct dp83td510_private *dp83td510;
+ int ret;
+
+ dp83td510 = devm_kzalloc(&phydev->mdio.dev, sizeof(*dp83td510), GFP_KERNEL);
+ if (!dp83td510)
+ return -ENOMEM;
+
+ phydev->priv = dp83td510;
+
+ ret = dp83td510_of_init(phydev);
+ if (ret)
+ return ret;
+
+ return dp83td510_config_init(phydev);
+}
+
+static struct phy_driver dp83td510_driver[] = {
+ {
+ PHY_ID_MATCH_MODEL(DP83TD510E_PHY_ID),
+ .name = "TI DP83TD510E",
+ .probe = dp83td510_probe,
+ .config_init = dp83td510_config_init,
+ .soft_reset = dp83td510_phy_reset,
+
+ /* IRQ related */
+ .ack_interrupt = dp83td510_ack_interrupt,
+ .config_intr = dp83td510_config_intr,
+
+ .get_features = dp83td510_get_features,
+
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ },
+};
+module_phy_driver(dp83td510_driver);
+
+static struct mdio_device_id __maybe_unused dp83td510_tbl[] = {
+ { PHY_ID_MATCH_MODEL(DP83TD510E_PHY_ID) },
+ { }
+};
+MODULE_DEVICE_TABLE(mdio, dp83td510_tbl);
+
+MODULE_DESCRIPTION("Texas Instruments DP83TD510E PHY driver");
+MODULE_AUTHOR("Dan Murphy <dmurphy@...com");
+MODULE_LICENSE("GPL v2");
+
--
2.28.0.585.ge1cfff676549
Powered by blists - more mailing lists