| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1603249236.31607.9.camel@mhfsdcap03>
Date: Wed, 21 Oct 2020 11:00:36 +0800
From: Chunfeng Yun <chunfeng.yun@...iatek.com>
To: Serge Semin <Sergey.Semin@...kalelectronics.ru>
CC: Mathias Nyman <mathias.nyman@...el.com>,
Felipe Balbi <balbi@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
"Greg Kroah-Hartman" <gregkh@...uxfoundation.org>,
Rob Herring <robh+dt@...nel.org>,
Serge Semin <fancer.lancer@...il.com>,
Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
Pavel Parkhomenko <Pavel.Parkhomenko@...kalelectronics.ru>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Manu Gautam <mgautam@...eaurora.org>,
Roger Quadros <rogerq@...com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
Neil Armstrong <narmstrong@...libre.com>,
Kevin Hilman <khilman@...libre.com>,
"Martin Blumenstingl" <martin.blumenstingl@...glemail.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-snps-arc@...ts.infradead.org>, <linux-mips@...r.kernel.org>,
<linuxppc-dev@...ts.ozlabs.org>, <linux-usb@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Rob Herring <robh@...nel.org>
Subject: Re: [PATCH v3 01/16] dt-bindings: usb: usb-hcd: Convert generic USB
properties to DT schema
On Tue, 2020-10-20 at 14:20 +0300, Serge Semin wrote:
> The generic USB HCD properties have been described in the legacy bindings
> text file: Documentation/devicetree/bindings/usb/generic.txt . Let's
> convert it' content into the USB HCD DT schema properties so all USB DT
^ its?
> nodes would be validated to have them properly utilized.
>
> Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
> Reviewed-by: Rob Herring <robh@...nel.org>
>
> ---
>
> Changelog v2:
> - Discard '|' in all the new properties, since we don't need to preserve
> the text formatting.
> - Convert abbreviated form of the "maximum-speed" enum restriction into
> the multi-lined version of the list.
> - Drop quotes from around the string constants.
> ---
> .../devicetree/bindings/usb/generic.txt | 57 ------------
> .../devicetree/bindings/usb/usb-hcd.yaml | 88 +++++++++++++++++++
Do we need change the file name or modify it's title?
the title is "Generic USB Host Controller Device Tree Bindings", but
some generic properties, such as, dr_mode, usb-role-switch, otg related
ones, are usually used by DRD controller, this may cause some confusion.
> 2 files changed, 88 insertions(+), 57 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/usb/generic.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt
> deleted file mode 100644
> index ba472e7aefc9..000000000000
> --- a/Documentation/devicetree/bindings/usb/generic.txt
> +++ /dev/null
> @@ -1,57 +0,0 @@
> -Generic USB Properties
> -
> -Optional properties:
> - - maximum-speed: tells USB controllers we want to work up to a certain
> - speed. Valid arguments are "super-speed-plus",
> - "super-speed", "high-speed", "full-speed" and
> - "low-speed". In case this isn't passed via DT, USB
> - controllers should default to their maximum HW
> - capability.
> - - dr_mode: tells Dual-Role USB controllers that we want to work on a
> - particular mode. Valid arguments are "host",
> - "peripheral" and "otg". In case this attribute isn't
> - passed via DT, USB DRD controllers should default to
> - OTG.
> - - phy_type: tells USB controllers that we want to configure the core to support
> - a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is
> - selected. Valid arguments are "utmi" and "utmi_wide".
> - In case this isn't passed via DT, USB controllers should
> - default to HW capability.
> - - otg-rev: tells usb driver the release number of the OTG and EH supplement
> - with which the device and its descriptors are compliant,
> - in binary-coded decimal (i.e. 2.0 is 0200H). This
> - property is used if any real OTG features(HNP/SRP/ADP)
> - is enabled, if ADP is required, otg-rev should be
> - 0x0200 or above.
> - - companion: phandle of a companion
> - - hnp-disable: tells OTG controllers we want to disable OTG HNP, normally HNP
> - is the basic function of real OTG except you want it
> - to be a srp-capable only B device.
> - - srp-disable: tells OTG controllers we want to disable OTG SRP, SRP is
> - optional for OTG device.
> - - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is
> - optional for OTG device.
> - - usb-role-switch: boolean, indicates that the device is capable of assigning
> - the USB data role (USB host or USB device) for a given
> - USB connector, such as Type-C, Type-B(micro).
> - see connector/usb-connector.yaml.
> - - role-switch-default-mode: indicating if usb-role-switch is enabled, the
> - device default operation mode of controller while usb
> - role is USB_ROLE_NONE. Valid arguments are "host" and
> - "peripheral". Defaults to "peripheral" if not
> - specified.
> -
> -
> -This is an attribute to a USB controller such as:
> -
> -dwc3@...30000 {
> - compatible = "synopsys,dwc3";
> - reg = <0x4a030000 0xcfff>;
> - interrupts = <0 92 4>
> - usb-phy = <&usb2_phy>, <&usb3,phy>;
> - maximum-speed = "super-speed";
> - dr_mode = "otg";
> - phy_type = "utmi_wide";
> - otg-rev = <0x0200>;
> - adp-disable;
> -};
> diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> index 7263b7f2b510..ee7ea205c71d 100644
> --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> @@ -22,9 +22,97 @@ properties:
> description:
> Name specifier for the USB PHY
>
> + maximum-speed:
> + description:
> + Tells USB controllers we want to work up to a certain speed. In case this
> + isn't passed via DT, USB controllers should default to their maximum HW
> + capability.
> + $ref: /schemas/types.yaml#/definitions/string
> + enum:
> + - low-speed
> + - full-speed
> + - high-speed
> + - super-speed
> + - super-speed-plus
> +
> + dr_mode:
> + description:
> + Tells Dual-Role USB controllers that we want to work on a particular
> + mode. In case this attribute isn't passed via DT, USB DRD controllers
> + should default to OTG.
> + $ref: /schemas/types.yaml#/definitions/string
> + enum: [host, peripheral, otg]
> +
> + phy_type:
> + description:
> + Tells USB controllers that we want to configure the core to support a
> + UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is selected. In case
> + this isn't passed via DT, USB controllers should default to HW
> + capability.
> + $ref: /schemas/types.yaml#/definitions/string
> + enum: [utmi, utmi_wide]
> +
> + otg-rev:
> + description:
> + Tells usb driver the release number of the OTG and EH supplement with
> + which the device and its descriptors are compliant, in binary-coded
> + decimal (i.e. 2.0 is 0200H). This property is used if any real OTG
> + features (HNP/SRP/ADP) is enabled. If ADP is required, otg-rev should be
> + 0x0200 or above.
> + $ref: /schemas/types.yaml#/definitions/uint32
> +
> + companion:
> + description: Phandle of a companion device
> + $ref: /schemas/types.yaml#/definitions/phandle
> +
> + hnp-disable:
> + description:
> + Tells OTG controllers we want to disable OTG HNP. Normally HNP is the
> + basic function of real OTG except you want it to be a srp-capable only B
> + device.
> + type: boolean
> +
> + srp-disable:
> + description:
> + Tells OTG controllers we want to disable OTG SRP. SRP is optional for OTG
> + device.
> + type: boolean
> +
> + adp-disable:
> + description:
> + Tells OTG controllers we want to disable OTG ADP. ADP is optional for OTG
> + device.
> + type: boolean
> +
> + usb-role-switch:
> + description:
> + Indicates that the device is capable of assigning the USB data role
> + (USB host or USB device) for a given USB connector, such as Type-C,
> + Type-B(micro). See connector/usb-connector.yaml.
> +
> + role-switch-default-mode:
> + description:
> + Indicates if usb-role-switch is enabled, the device default operation
> + mode of controller while usb role is USB_ROLE_NONE.
> + $ref: /schemas/types.yaml#/definitions/string
> + enum: [host, peripheral]
> + default: peripheral
> +
> examples:
> - |
> usb {
> phys = <&usb2_phy1>, <&usb3_phy1>;
> phy-names = "usb";
> };
> + - |
> + usb@...30000 {
> + compatible = "snps,dwc3";
> + reg = <0x4a030000 0xcfff>;
> + interrupts = <0 92 4>;
> + usb-phy = <&usb2_phy>, <&usb3_phy>;
> + maximum-speed = "super-speed";
> + dr_mode = "otg";
> + phy_type = "utmi_wide";
> + otg-rev = <0x0200>;
> + adp-disable;
> + };
Powered by blists - more mailing lists