| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201023105626.6534-3-o.rempel@pengutronix.de>
Date: Fri, 23 Oct 2020 12:56:22 +0200
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Andrew Lunn <andrew@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Jakub Kicinski <kuba@...nel.org>,
Oliver Hartkopp <socketcan@...tkopp.net>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>,
David Jander <david@...tonic.nl>, kernel@...gutronix.de,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
Russell King <linux@...linux.org.uk>, mkl@...gutronix.de,
Marek Vasut <marex@...x.de>, linux-can@...r.kernel.org
Subject: [RFC PATCH v1 2/6] net: phy: add a driver for generic CAN PHYs
Generic CAN PHY driver should provide support for simple CAN PHYs
(transceiver).
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
drivers/net/phy/Kconfig | 6 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/can_phy_drv.c | 236 ++++++++++++++++++++++++++++++++++
3 files changed, 243 insertions(+)
create mode 100644 drivers/net/phy/can_phy_drv.c
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 39e3f57ea60a..c4ae29c8e9ff 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -153,6 +153,12 @@ config BCM_CYGNUS_PHY
config BCM_NET_PHYLIB
tristate
+config CAN_GENERIC_PHY
+ tristate "Generic CAN PHY"
+ depends on CAN_PHY_BUS
+ help
+ Enable this driver to support the majority of simple CAN PHYs.
+
config CAN_PHY_BUS
tristate "Virtual CAN PHY Bus"
depends on PHYLIB
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 0d76d802c07f..80053cb13dc0 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o
obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o
obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
+obj-$(CONFIG_CAN_GENERIC_PHY) += can_phy_drv.o
obj-$(CONFIG_CAN_PHY_BUS) += can_phy_bus.o
obj-$(CONFIG_CICADA_PHY) += cicada.o
obj-$(CONFIG_CORTINA_PHY) += cortina.o
diff --git a/drivers/net/phy/can_phy_drv.c b/drivers/net/phy/can_phy_drv.c
new file mode 100644
index 000000000000..c52bf11fdc03
--- /dev/null
+++ b/drivers/net/phy/can_phy_drv.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// SPDX-FileCopyrightText: 2020 Oleksij Rempel <kernel@...gutronix.de>, Pengutronix
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/regulator/consumer.h>
+
+/* flags */
+#define CAN_GEN_SIC_XL BIT(5)
+#define CAN_GEN_SIC BIT(4)
+#define CAN_GEN_FD BIT(3)
+#define CAN_GEN_HS BIT(2)
+#define CAN_GEN_LS BIT(1)
+#define CAN_GEN_SW BIT(0)
+
+struct can_gen_dcfg {
+ u32 flags;
+ u32 max_bitrate;
+};
+
+struct can_gen_priv {
+ struct regulator *reg_xceiver;
+ struct can_gen_dcfg dcfg;
+ bool off;
+};
+
+static const struct can_gen_dcfg can_gen_nxp_tja1051 = {
+ .flags = CAN_GEN_HS | CAN_GEN_FD,
+ .max_bitrate = 5000000,
+};
+
+static const struct of_device_id can_gen_ids[] = {
+ {
+ .compatible = "can,generic-transceiver",
+ }, {
+ .compatible = "nxp,tja1051",
+ .data = &can_gen_nxp_tja1051,
+ }, { /* sentinel */ }
+};
+
+static void can_gen_get_bitrate(struct can_gen_priv *priv,
+ struct phy_device *phydev)
+{
+ struct device_node *np = phydev->mdio.dev.of_node;
+ struct can_gen_dcfg *dcfg = &priv->dcfg;
+ u32 max_bitrate;
+ int ret;
+
+ ret = of_property_read_u32(np, "max-bitrate", &max_bitrate);
+ if (ret)
+ phydev_warn(phydev, "Can't read max-bitrate\n");
+
+ if (!dcfg->max_bitrate && !max_bitrate) {
+ phydev_warn(phydev, "Huh... Limitless PHY!!\n");
+
+ if (dcfg->flags & CAN_GEN_FD) {
+ max_bitrate = 12000000; /* 12Mbit */
+ } else if (dcfg->flags & CAN_GEN_HS) {
+ max_bitrate = 1000000; /* 1Mbit */
+ } else if (dcfg->flags & CAN_GEN_LS) {
+ max_bitrate = 125000; /* 125Kbit */
+ } else if (dcfg->flags & CAN_GEN_SW) {
+ max_bitrate = 83300; /* 83.3kbit */
+ } else {
+ max_bitrate = 12000000; /* 12Mbit */
+ phydev_warn(phydev, "Can't determine the max bitrate! Set: %d\n",
+ max_bitrate);
+ }
+
+ dcfg->max_bitrate = max_bitrate;
+ } else if (dcfg->max_bitrate && max_bitrate > dcfg->max_bitrate) {
+ phydev_info(phydev, "Ignoring max-bitrate property: %d, hw limit: %d\n",
+ max_bitrate, dcfg->max_bitrate);
+ } else {
+ dcfg->max_bitrate = max_bitrate;
+ }
+}
+
+static void can_gen_parse_dt_flags(struct can_gen_priv *priv,
+ struct phy_device *phydev)
+{
+ struct can_gen_dcfg *dcfg = &priv->dcfg;
+ struct device *dev = &phydev->mdio.dev;
+
+ if (device_property_read_bool(dev, "can-sic-xl"))
+ dcfg->flags |= CAN_GEN_SIC_XL;
+ if (device_property_read_bool(dev, "can-sic"))
+ dcfg->flags |= CAN_GEN_SIC;
+ if (device_property_read_bool(dev, "can-fd"))
+ dcfg->flags |= CAN_GEN_FD;
+ if (device_property_read_bool(dev, "can-hs"))
+ dcfg->flags |= CAN_GEN_HS;
+ if (device_property_read_bool(dev, "can-ls"))
+ dcfg->flags |= CAN_GEN_LS;
+ if (device_property_read_bool(dev, "can-sw"))
+ dcfg->flags |= CAN_GEN_SW;
+}
+
+static int can_gen_probe(struct phy_device *phydev)
+{
+ struct device_node *np = phydev->mdio.dev.of_node;
+ const struct of_device_id *match;
+ struct regulator *reg_xceiver;
+ struct can_gen_priv *priv;
+
+ match = of_match_node(can_gen_ids, np);
+ if (!match)
+ return 0;
+
+ reg_xceiver = devm_regulator_get_optional(&phydev->mdio.dev, "xceiver");
+ if (PTR_ERR(reg_xceiver) == -ENODEV)
+ reg_xceiver = NULL;
+ else if (IS_ERR(reg_xceiver))
+ return dev_err_probe(&phydev->mdio.dev, PTR_ERR(reg_xceiver),
+ "Failed to get Transceiver regulator!\n");
+
+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ if (!match->data)
+ can_gen_parse_dt_flags(priv, phydev);
+ else
+ memcpy(&priv->dcfg, match->data, sizeof(priv->dcfg));
+
+ can_gen_get_bitrate(priv, phydev);
+
+ phydev->priv = priv;
+ priv->reg_xceiver = reg_xceiver;
+ priv->off = true;
+
+ return 0;
+}
+
+static int can_gen_read_status(struct phy_device *phydev)
+{
+ phydev->link = true;
+ phydev->duplex = DUPLEX_HALF;
+
+ return 0;
+}
+
+static int can_gen_match_phy_device(struct phy_device *phydev)
+{
+ struct device_node *np = phydev->mdio.dev.of_node;
+ const struct of_device_id *match;
+
+ if (phydev->phy_id)
+ return 0;
+
+ match = of_match_node(can_gen_ids, np);
+ if (!match)
+ return 0;
+
+ return 1;
+}
+
+static int can_get_features(struct phy_device *phydev)
+{
+ struct can_gen_priv *priv = phydev->priv;
+ struct can_gen_dcfg *dcfg = &priv->dcfg;
+
+ phydev->interface = PHY_INTERFACE_MODE_CAN;
+ phydev->max_bitrate = dcfg->max_bitrate;
+
+ if (dcfg->flags & CAN_GEN_SIC_XL)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_CAN_SIC_XL_BIT,
+ phydev->supported);
+ if (dcfg->flags & CAN_GEN_SIC)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_CAN_SIC_BIT,
+ phydev->supported);
+ if (dcfg->flags & CAN_GEN_FD)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_CAN_FD_BIT,
+ phydev->supported);
+ if (dcfg->flags & CAN_GEN_HS)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_CAN_HS_BIT,
+ phydev->supported);
+ if (dcfg->flags & CAN_GEN_LS)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_CAN_LS_BIT,
+ phydev->supported);
+ if (dcfg->flags & CAN_GEN_SW)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_CAN_SW_BIT,
+ phydev->supported);
+
+ return 0;
+}
+
+static int can_gen_config_aneg(struct phy_device *phydev)
+{
+ return 0;
+}
+
+static int can_gen_resume(struct phy_device *phydev)
+{
+ struct can_gen_priv *priv = phydev->priv;
+
+ /* Resume can be called multiple times, so it will be asymmetric to
+ * the suspend call.*/
+ if (!priv->off)
+ return 0;
+
+ priv->off = false;
+
+ return regulator_enable(priv->reg_xceiver);
+}
+
+static int can_gen_suspend(struct phy_device *phydev)
+{
+ struct can_gen_priv *priv = phydev->priv;
+
+ if (priv->off)
+ return 0;
+
+ priv->off = true;
+
+ return regulator_disable(priv->reg_xceiver);
+}
+
+static struct phy_driver can_gen_drv[] = {
+ {
+ .name = "Generic CAN PHY",
+ .match_phy_device = can_gen_match_phy_device,
+ .probe = can_gen_probe,
+ .read_status = can_gen_read_status,
+ .suspend = can_gen_suspend,
+ .resume = can_gen_resume,
+ .get_features = can_get_features,
+ .config_aneg = can_gen_config_aneg,
+ },
+};
+module_phy_driver(can_gen_drv);
+
+MODULE_DESCRIPTION("Generic CAN PHY driver");
+MODULE_AUTHOR("Oleksij Rempel");
+MODULE_LICENSE("GPLv2");
--
2.28.0
Powered by blists - more mailing lists