linux-kernel - Re: [PATCH 4/4] clk: renesas: r8a774c0: Add RPC clocks

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CAMuHMdUdVhp-g_3G2+MZd9thyxojB-w1SnmPd0XuWgB4XztOzg@mail.gmail.com>
Date:   Fri, 23 Oct 2020 14:42:32 +0200
From:   Geert Uytterhoeven <geert@...ux-m68k.org>
To:     "Lad, Prabhakar" <prabhakar.csengg@...il.com>
Cc:     Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
        linux-clk <linux-clk@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Biju Das <biju.das.jz@...renesas.com>
Subject: Re: [PATCH 4/4] clk: renesas: r8a774c0: Add RPC clocks

Hi Prabhakar,

On Fri, Oct 23, 2020 at 1:06 PM Lad, Prabhakar
<prabhakar.csengg@...il.com> wrote:
> On Thu, Oct 22, 2020 at 3:09 PM Geert Uytterhoeven <geert@...ux-m68k.org> wrote:
> > On Fri, Oct 16, 2020 at 2:17 PM Lad Prabhakar
> > <prabhakar.mahadev-lad.rj@...renesas.com> wrote:
> > > Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it,
> > > as well as the RPC-IF module clock, in the RZ/G2E (R8A774C0) CPG/MSSR
> > > driver.
> > >
> > > Inspired by commit 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks").
> > >
> > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> > > Reviewed-by: Biju Das <biju.das.jz@...renesas.com>
> >
> > Thanks for your patch!
> >
> > > --- a/drivers/clk/renesas/r8a774c0-cpg-mssr.c
> > > +++ b/drivers/clk/renesas/r8a774c0-cpg-mssr.c
> > > @@ -73,6 +74,12 @@ static const struct cpg_core_clk r8a774c0_core_clks[] __initconst = {
> > >         DEF_FIXED(".s2",       CLK_S2,             CLK_PLL1,       4, 1),
> > >         DEF_FIXED(".s3",       CLK_S3,             CLK_PLL1,       6, 1),
> > >         DEF_FIXED(".sdsrc",    CLK_SDSRC,          CLK_PLL1,       2, 1),
> > > +       DEF_BASE(".rpcsrc",    CLK_RPCSRC, CLK_TYPE_GEN3_RPCSRC, CLK_PLL1),
> > > +
> > > +       DEF_BASE("rpc",        R8A774C0_CLK_RPC, CLK_TYPE_GEN3_RPC,
> > > +                CLK_RPCSRC),
> > > +       DEF_BASE("rpcd2",      R8A774C0_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2,
> > > +                R8A774C0_CLK_RPC),
> > >
> > >         DEF_DIV6_RO(".r",      CLK_RINT,           CLK_EXTAL, CPG_RCKCR, 32),
> > >
> >
> > > @@ -275,6 +283,10 @@ static int __init r8a774c0_cpg_mssr_init(struct device *dev)
> > >         return rcar_gen3_cpg_init(cpg_pll_config, 0, cpg_mode);
> > >  }
> > >
> > > +static const struct clk_div_table cpg_rpcsrc_div_table[] = {
> > > +       { 0, 5 }, { 1, 3 }, { 2, 8 }, {3, 2}, {0, 0},
> > > +};
> >
> > The above models RPCSRC as a clock generated by dividing PLL1 by either
> > 5, 3, 8, or 2.  This does not match the hardware user's manual, which
> > states that RPCSRC is either PLL1 divided by 5 or 3, or PLL0 divided by
> > 8 or 2.
> >
> Oops I completely missed that.
>
> But as per the manual (R-Car manual Rev.2.20) which I am referring to
> 5, 3 and 2 are sourced from PLL1 and 5/8 (ie D3/E3) are sourced from
> PLL0.

True, I misread the clocksource of the last entry.

> > I think you need a new clock type (CLK_TYPE_GEN3E_RPCSRC, as it applies
> > to RZ/G2E, and R-Car E3?), which registers a composite clock consisting
> > of a mux and divider.  This is a bit similar to the RPC/RPCD2 clocks,
> > which are composite clocks consisting of a divider and a gate.
> >
> atm rcar_gen3_cpg_clk_register() only supports single parent, so if I
> am getting it right you mean I need to add two separate entries for
> RPSRC  one with PLL0 and one with PLL1 ?

You can encode a second parent in the high halfword, cfr. what
CLK_TYPE_GEN3_MDSEL and CLK_TYPE_GEN3_RCKSEL.

Note to myself: convert cpg_core_clk to a union, to make encoding
and decoding easier.

> > Note that R-Car D3 is similar, except that PLL0 is divided by 5 or 2, which
> > means yet another clock type (and div_table).
> >
> I'm a bit confused here for D3 PLL0 is divided by 5 (n=5) ?

Sorry, same misreading as above.
Have a nice weekend!

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds