linux-kernel - [PATCH 2/2] ARM: dts: rockchip: Add SDIO0 node for VMARC SOM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201023181814.220974-2-jagan@amarulasolutions.com>
Date:   Fri, 23 Oct 2020 23:48:14 +0530
From:   Jagan Teki <jagan@...rulasolutions.com>
To:     Heiko Stuebner <heiko@...ech.de>, Rob Herring <robh+dt@...nel.org>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will@...nel.org>
Cc:     Tom Cubie <tom@...xa.com>,
        Suniel Mahesh <sunil@...rulasolutions.com>,
        linux-arm-kernel@...ts.infradead.org,
        linux-rockchip@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        linux-amarula <linux-amarula@...rulasolutions.com>,
        Jagan Teki <jagan@...rulasolutions.com>
Subject: [PATCH 2/2] ARM: dts: rockchip: Add SDIO0 node for VMARC SOM

Rockchip RK3288 and RK3399Pro based VMARC SOM has sdio0 for
connecting WiFi/BT devices as a pluggable card via M.2 E-Key.

Add associated sdio0 nodes, properties.

Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
---
 arch/arm/boot/dts/rk3288-vmarc-som.dtsi       | 40 +++++++++++++++++++
 .../dts/rockchip-radxa-dalang-carrier.dtsi    | 21 ++++++++++
 .../dts/rockchip/rk3399pro-vmarc-som.dtsi     | 16 ++++++++
 3 files changed, 77 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
index 4a373f5aa600..353d95b9953b 100644
--- a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
@@ -231,6 +231,23 @@ regulator-state-mem {
 	};
 };
 
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
 &i2c5 {
 	status = "okay";
 };
@@ -241,10 +258,17 @@ &io_domains {
 	gpio1830-supply = <&vcc_18>;
 	gpio30-supply = <&vcc_io>;
 	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vcc_wl>;
 	status = "okay";
 };
 
 &pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
 		drive-strength = <8>;
 	};
@@ -260,6 +284,12 @@ pmic_int: pmic-int {
 		};
 	};
 
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	sdmmc {
 		sdmmc_bus4: sdmmc-bus4 {
 			rockchip,pins =
@@ -291,6 +321,16 @@ usb0_en_oc: usb0-en-oc {
 	};
 };
 
+&sdio_pwrseq {
+	/*
+	 * On the module itself this is one of these (depending
+	 * on the actual card populated):
+	 * - SDIO_RESET_L_WL_REG_ON
+	 * - PDN (power down when low)
+	 */
+	reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;	/* WIFI_REG_ON */
+};
+
 &usbphy {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
index 26b53eac4706..da1d548b7330 100644
--- a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
+++ b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
@@ -15,6 +15,14 @@ clkin_gmac: external-gmac-clock {
 		#clock-cells = <0>;
 	};
 
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+	};
+
 	vcc12v_dcin: vcc12v-dcin-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc12v_dcin";
@@ -78,6 +86,19 @@ &pwm2 {
 	status = "okay";
 };
 
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
 &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index 5d087be04af8..7257494d2831 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -353,6 +353,12 @@ pmic_int_l: pmic-int-l {
 		};
 	};
 
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	vbus_host {
 		usb1_en_oc: usb1-en-oc {
 			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -371,6 +377,16 @@ &pmu_io_domains {
 	pmu1830-supply = <&vcc_1v8>;
 };
 
+&sdio_pwrseq {
+	/*
+	 * On the module itself this is one of these (depending
+	 * on the actual card populated):
+	 * - SDIO_RESET_L_WL_REG_ON
+	 * - PDN (power down when low)
+	 */
+	reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
+};
+
 &sdhci {
 	bus-width = <8>;
 	mmc-hs400-1_8v;
-- 
2.25.1