Message-ID: <20201025181133.GB941@earth.li>
Date:   Sun, 25 Oct 2020 18:11:33 +0000
From:   Jonathan McDowell <noodles@...th.li>
To:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Dan Williams <dan.j.williams@...el.com>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Thomas Pedersen <twp@...eaurora.org>,
        Vinod Koul <vkoul@...nel.org>, linux-kernel@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, dmaengine@...r.kernel.org
Subject: Re: [PATCH v4] dmaengine: qcom: Add ADM driver

Gentle ping on this one; looks like I missed the window for 5.10, but is
there anything outstanding for it to hit 5.11 or should I just have
patience?

On Wed, Sep 23, 2020 at 08:40:56PM +0100, Jonathan McDowell wrote:
> Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
> controller found in the MSM8x60 and IPQ/APQ8064 platforms.
> 
> The ADM supports both memory to memory transactions and memory
> to/from peripheral device transactions.  The controller also provides
> flow control capabilities for transactions to/from peripheral devices.
> 
> The initial release of this driver supports slave transfers to/from
> peripherals and also incorporates CRCI (client rate control interface)
> flow control.
> 
> Signed-off-by: Andy Gross <agross@...eaurora.org>
> Signed-off-by: Thomas Pedersen <twp@...eaurora.org>
> Signed-off-by: Jonathan McDowell <noodles@...th.li>
> 
> (I'm not sure how best to attribute this. It's originally from Andy
> Gross, the version I picked up was a later version from Thomas Pedersen,
> and I can't find clear indication of why the latest version wasn't
> applied. The device tree details were added back in September 2014. The
> driver is the missing piece in mainline for IPQ8064 NAND support and
> I've been using it successfully with my RB3011 device on 5.8+)
> 
> v4:
> - Reorder probe function to acquire resources before enabling anything
> v3:
> - Depend on !PHYS_ADDR_T_64BIT rather than !64BIT as reported by kernel
>   test robot <lkp@...el.com>
> v2:
> - Address Vinod's review comments
>   - GFP_NOWAIT instead of GFP_ATOMIC
>   - Use devm_platform_ioremap_resource()
>   - Call tasklet_kill on remove
>   - Sort Kconfig/Makefile entries
>   - SPDX identifier
>   - Formatting fixes for checkpatch --strict
> ---
>  drivers/dma/qcom/Kconfig    |  11 +
>  drivers/dma/qcom/Makefile   |   1 +
>  drivers/dma/qcom/qcom_adm.c | 903 ++++++++++++++++++++++++++++++++++++
>  3 files changed, 915 insertions(+)
>  create mode 100644 drivers/dma/qcom/qcom_adm.c
> 
> diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig
> index 3bcb689162c6..0389d60d2604 100644
> --- a/drivers/dma/qcom/Kconfig
> +++ b/drivers/dma/qcom/Kconfig
> @@ -1,4 +1,15 @@
>  # SPDX-License-Identifier: GPL-2.0-only
> +config QCOM_ADM
> +	tristate "Qualcomm ADM support"
> +	depends on (ARCH_QCOM || COMPILE_TEST) && !PHYS_ADDR_T_64BIT
> +	select DMA_ENGINE
> +	select DMA_VIRTUAL_CHANNELS
> +	help
> +	  Enable support for the Qualcomm Application Data Mover (ADM) DMA
> +	  controller, as present on MSM8x60, APQ8064, and IPQ8064 devices.
> +	  This controller provides DMA capabilities for both general purpose
> +	  and on-chip peripheral devices.
> +
>  config QCOM_BAM_DMA
>  	tristate "QCOM BAM DMA support"
>  	depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
> diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile
> index 1ae92da88b0c..346e643fbb6d 100644
> --- a/drivers/dma/qcom/Makefile
> +++ b/drivers/dma/qcom/Makefile
> @@ -1,4 +1,5 @@
>  # SPDX-License-Identifier: GPL-2.0
> +obj-$(CONFIG_QCOM_ADM) += qcom_adm.o
>  obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
>  obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mgmt.o
>  hdma_mgmt-objs	 := hidma_mgmt.o hidma_mgmt_sys.o
> diff --git a/drivers/dma/qcom/qcom_adm.c b/drivers/dma/qcom/qcom_adm.c
> new file mode 100644
> index 000000000000..9b6f8e050ecc
> --- /dev/null
> +++ b/drivers/dma/qcom/qcom_adm.c
> @@ -0,0 +1,903 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/dmaengine.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_dma.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/scatterlist.h>
> +#include <linux/slab.h>
> +
> +#include "../dmaengine.h"
> +#include "../virt-dma.h"
> +
> +/* ADM registers - calculated from channel number and security domain */
> +#define ADM_CHAN_MULTI			0x4
> +#define ADM_CI_MULTI			0x4
> +#define ADM_CRCI_MULTI			0x4
> +#define ADM_EE_MULTI			0x800
> +#define ADM_CHAN_OFFS(chan)		(ADM_CHAN_MULTI * (chan))
> +#define ADM_EE_OFFS(ee)			(ADM_EE_MULTI * (ee))
> +#define ADM_CHAN_EE_OFFS(chan, ee)	(ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee))
> +#define ADM_CHAN_OFFS(chan)		(ADM_CHAN_MULTI * (chan))
> +#define ADM_CI_OFFS(ci)			(ADM_CHAN_OFF(ci))
> +#define ADM_CH_CMD_PTR(chan, ee)	(ADM_CHAN_EE_OFFS(chan, ee))
> +#define ADM_CH_RSLT(chan, ee)		(0x40 + ADM_CHAN_EE_OFFS(chan, ee))
> +#define ADM_CH_FLUSH_STATE0(chan, ee)	(0x80 + ADM_CHAN_EE_OFFS(chan, ee))
> +#define ADM_CH_STATUS_SD(chan, ee)	(0x200 + ADM_CHAN_EE_OFFS(chan, ee))
> +#define ADM_CH_CONF(chan)		(0x240 + ADM_CHAN_OFFS(chan))
> +#define ADM_CH_RSLT_CONF(chan, ee)	(0x300 + ADM_CHAN_EE_OFFS(chan, ee))
> +#define ADM_SEC_DOMAIN_IRQ_STATUS(ee)	(0x380 + ADM_EE_OFFS(ee))
> +#define ADM_CI_CONF(ci)			(0x390 + (ci) * ADM_CI_MULTI)
> +#define ADM_GP_CTL			0x3d8
> +#define ADM_CRCI_CTL(crci, ee)		(0x400 + (crci) * ADM_CRCI_MULTI + \
> +						ADM_EE_OFFS(ee))
> +
> +/* channel status */
> +#define ADM_CH_STATUS_VALID		BIT(1)
> +
> +/* channel result */
> +#define ADM_CH_RSLT_VALID		BIT(31)
> +#define ADM_CH_RSLT_ERR			BIT(3)
> +#define ADM_CH_RSLT_FLUSH		BIT(2)
> +#define ADM_CH_RSLT_TPD			BIT(1)
> +
> +/* channel conf */
> +#define ADM_CH_CONF_SHADOW_EN		BIT(12)
> +#define ADM_CH_CONF_MPU_DISABLE		BIT(11)
> +#define ADM_CH_CONF_PERM_MPU_CONF	BIT(9)
> +#define ADM_CH_CONF_FORCE_RSLT_EN	BIT(7)
> +#define ADM_CH_CONF_SEC_DOMAIN(ee)	((((ee) & 0x3) << 4) | (((ee) & 0x4) << 11))
> +
> +/* channel result conf */
> +#define ADM_CH_RSLT_CONF_FLUSH_EN	BIT(1)
> +#define ADM_CH_RSLT_CONF_IRQ_EN		BIT(0)
> +
> +/* CRCI CTL */
> +#define ADM_CRCI_CTL_MUX_SEL		BIT(18)
> +#define ADM_CRCI_CTL_RST		BIT(17)
> +
> +/* CI configuration */
> +#define ADM_CI_RANGE_END(x)		((x) << 24)
> +#define ADM_CI_RANGE_START(x)		((x) << 16)
> +#define ADM_CI_BURST_4_WORDS		BIT(2)
> +#define ADM_CI_BURST_8_WORDS		BIT(3)
> +
> +/* GP CTL */
> +#define ADM_GP_CTL_LP_EN		BIT(12)
> +#define ADM_GP_CTL_LP_CNT(x)		((x) << 8)
> +
> +/* Command pointer list entry */
> +#define ADM_CPLE_LP			BIT(31)
> +#define ADM_CPLE_CMD_PTR_LIST		BIT(29)
> +
> +/* Command list entry */
> +#define ADM_CMD_LC			BIT(31)
> +#define ADM_CMD_DST_CRCI(n)		(((n) & 0xf) << 7)
> +#define ADM_CMD_SRC_CRCI(n)		(((n) & 0xf) << 3)
> +
> +#define ADM_CMD_TYPE_SINGLE		0x0
> +#define ADM_CMD_TYPE_BOX		0x3
> +
> +#define ADM_CRCI_MUX_SEL		BIT(4)
> +#define ADM_DESC_ALIGN			8
> +#define ADM_MAX_XFER			(SZ_64K - 1)
> +#define ADM_MAX_ROWS			(SZ_64K - 1)
> +#define ADM_MAX_CHANNELS		16
> +
> +struct adm_desc_hw_box {
> +	u32 cmd;
> +	u32 src_addr;
> +	u32 dst_addr;
> +	u32 row_len;
> +	u32 num_rows;
> +	u32 row_offset;
> +};
> +
> +struct adm_desc_hw_single {
> +	u32 cmd;
> +	u32 src_addr;
> +	u32 dst_addr;
> +	u32 len;
> +};
> +
> +struct adm_async_desc {
> +	struct virt_dma_desc vd;
> +	struct adm_device *adev;
> +
> +	size_t length;
> +	enum dma_transfer_direction dir;
> +	dma_addr_t dma_addr;
> +	size_t dma_len;
> +
> +	void *cpl;
> +	dma_addr_t cp_addr;
> +	u32 crci;
> +	u32 mux;
> +	u32 blk_size;
> +};
> +
> +struct adm_chan {
> +	struct virt_dma_chan vc;
> +	struct adm_device *adev;
> +
> +	/* parsed from DT */
> +	u32 id;			/* channel id */
> +
> +	struct adm_async_desc *curr_txd;
> +	struct dma_slave_config slave;
> +	struct list_head node;
> +
> +	int error;
> +	int initialized;
> +};
> +
> +static inline struct adm_chan *to_adm_chan(struct dma_chan *common)
> +{
> +	return container_of(common, struct adm_chan, vc.chan);
> +}
> +
> +struct adm_device {
> +	void __iomem *regs;
> +	struct device *dev;
> +	struct dma_device common;
> +	struct device_dma_parameters dma_parms;
> +	struct adm_chan *channels;
> +
> +	u32 ee;
> +
> +	struct clk *core_clk;
> +	struct clk *iface_clk;
> +
> +	struct reset_control *clk_reset;
> +	struct reset_control *c0_reset;
> +	struct reset_control *c1_reset;
> +	struct reset_control *c2_reset;
> +	int irq;
> +};
> +
> +/**
> + * adm_free_chan - Frees dma resources associated with the specific channel
> + *
> + * Free all allocated descriptors associated with this channel
> + *
> + */
> +static void adm_free_chan(struct dma_chan *chan)
> +{
> +	/* free all queued descriptors */
> +	vchan_free_chan_resources(to_virt_chan(chan));
> +}
> +
> +/**
> + * adm_get_blksize - Get block size from burst value
> + *
> + */
> +static int adm_get_blksize(unsigned int burst)
> +{
> +	int ret;
> +
> +	switch (burst) {
> +	case 16:
> +	case 32:
> +	case 64:
> +	case 128:
> +		ret = ffs(burst >> 4) - 1;
> +		break;
> +	case 192:
> +		ret = 4;
> +		break;
> +	case 256:
> +		ret = 5;
> +		break;
> +	default:
> +		ret = -EINVAL;
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
> +/**
> + * adm_process_fc_descriptors - Process descriptors for flow controlled xfers
> + *
> + * @achan: ADM channel
> + * @desc: Descriptor memory pointer
> + * @sg: Scatterlist entry
> + * @crci: CRCI value
> + * @burst: Burst size of transaction
> + * @direction: DMA transfer direction
> + */
> +static void *adm_process_fc_descriptors(struct adm_chan *achan, void *desc,
> +					struct scatterlist *sg, u32 crci,
> +					u32 burst,
> +					enum dma_transfer_direction direction)
> +{
> +	struct adm_desc_hw_box *box_desc = NULL;
> +	struct adm_desc_hw_single *single_desc;
> +	u32 remainder = sg_dma_len(sg);
> +	u32 rows, row_offset, crci_cmd;
> +	u32 mem_addr = sg_dma_address(sg);
> +	u32 *incr_addr = &mem_addr;
> +	u32 *src, *dst;
> +
> +	if (direction == DMA_DEV_TO_MEM) {
> +		crci_cmd = ADM_CMD_SRC_CRCI(crci);
> +		row_offset = burst;
> +		src = &achan->slave.src_addr;
> +		dst = &mem_addr;
> +	} else {
> +		crci_cmd = ADM_CMD_DST_CRCI(crci);
> +		row_offset = burst << 16;
> +		src = &mem_addr;
> +		dst = &achan->slave.dst_addr;
> +	}
> +
> +	while (remainder >= burst) {
> +		box_desc = desc;
> +		box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd;
> +		box_desc->row_offset = row_offset;
> +		box_desc->src_addr = *src;
> +		box_desc->dst_addr = *dst;
> +
> +		rows = remainder / burst;
> +		rows = min_t(u32, rows, ADM_MAX_ROWS);
> +		box_desc->num_rows = rows << 16 | rows;
> +		box_desc->row_len = burst << 16 | burst;
> +
> +		*incr_addr += burst * rows;
> +		remainder -= burst * rows;
> +		desc += sizeof(*box_desc);
> +	}
> +
> +	/* if leftover bytes, do one single descriptor */
> +	if (remainder) {
> +		single_desc = desc;
> +		single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd;
> +		single_desc->len = remainder;
> +		single_desc->src_addr = *src;
> +		single_desc->dst_addr = *dst;
> +		desc += sizeof(*single_desc);
> +
> +		if (sg_is_last(sg))
> +			single_desc->cmd |= ADM_CMD_LC;
> +	} else {
> +		if (box_desc && sg_is_last(sg))
> +			box_desc->cmd |= ADM_CMD_LC;
> +	}
> +
> +	return desc;
> +}
> +
> +/**
> + * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers
> + *
> + * @achan: ADM channel
> + * @desc: Descriptor memory pointer
> + * @sg: Scatterlist entry
> + * @direction: DMA transfer direction
> + */
> +static void *adm_process_non_fc_descriptors(struct adm_chan *achan, void *desc,
> +					    struct scatterlist *sg,
> +					    enum dma_transfer_direction direction)
> +{
> +	struct adm_desc_hw_single *single_desc;
> +	u32 remainder = sg_dma_len(sg);
> +	u32 mem_addr = sg_dma_address(sg);
> +	u32 *incr_addr = &mem_addr;
> +	u32 *src, *dst;
> +
> +	if (direction == DMA_DEV_TO_MEM) {
> +		src = &achan->slave.src_addr;
> +		dst = &mem_addr;
> +	} else {
> +		src = &mem_addr;
> +		dst = &achan->slave.dst_addr;
> +	}
> +
> +	do {
> +		single_desc = desc;
> +		single_desc->cmd = ADM_CMD_TYPE_SINGLE;
> +		single_desc->src_addr = *src;
> +		single_desc->dst_addr = *dst;
> +		single_desc->len = (remainder > ADM_MAX_XFER) ?
> +				ADM_MAX_XFER : remainder;
> +
> +		remainder -= single_desc->len;
> +		*incr_addr += single_desc->len;
> +		desc += sizeof(*single_desc);
> +	} while (remainder);
> +
> +	/* set last command if this is the end of the whole transaction */
> +	if (sg_is_last(sg))
> +		single_desc->cmd |= ADM_CMD_LC;
> +
> +	return desc;
> +}
> +
> +/**
> + * adm_prep_slave_sg - Prep slave sg transaction
> + *
> + * @chan: dma channel
> + * @sgl: scatter gather list
> + * @sg_len: length of sg
> + * @direction: DMA transfer direction
> + * @flags: DMA flags
> + * @context: transfer context (unused)
> + */
> +static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
> +							 struct scatterlist *sgl,
> +							 unsigned int sg_len,
> +							 enum dma_transfer_direction direction,
> +							 unsigned long flags,
> +							 void *context)
> +{
> +	struct adm_chan *achan = to_adm_chan(chan);
> +	struct adm_device *adev = achan->adev;
> +	struct adm_async_desc *async_desc;
> +	struct scatterlist *sg;
> +	dma_addr_t cple_addr;
> +	u32 i, burst;
> +	u32 single_count = 0, box_count = 0, crci = 0;
> +	void *desc;
> +	u32 *cple;
> +	int blk_size = 0;
> +
> +	if (!is_slave_direction(direction)) {
> +		dev_err(adev->dev, "invalid dma direction\n");
> +		return NULL;
> +	}
> +
> +	/*
> +	 * get burst value from slave configuration
> +	 */
> +	burst = (direction == DMA_MEM_TO_DEV) ?
> +		achan->slave.dst_maxburst :
> +		achan->slave.src_maxburst;
> +
> +	/* if using flow control, validate burst and crci values */
> +	if (achan->slave.device_fc) {
> +		blk_size = adm_get_blksize(burst);
> +		if (blk_size < 0) {
> +			dev_err(adev->dev, "invalid burst value: %d\n",
> +				burst);
> +			return ERR_PTR(-EINVAL);
> +		}
> +
> +		crci = achan->slave.slave_id & 0xf;
> +		if (!crci || achan->slave.slave_id > 0x1f) {
> +			dev_err(adev->dev, "invalid crci value\n");
> +			return ERR_PTR(-EINVAL);
> +		}
> +	}
> +
> +	/* iterate through sgs and compute allocation size of structures */
> +	for_each_sg(sgl, sg, sg_len, i) {
> +		if (achan->slave.device_fc) {
> +			box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst,
> +						  ADM_MAX_ROWS);
> +			if (sg_dma_len(sg) % burst)
> +				single_count++;
> +		} else {
> +			single_count += DIV_ROUND_UP(sg_dma_len(sg),
> +						     ADM_MAX_XFER);
> +		}
> +	}
> +
> +	async_desc = kzalloc(sizeof(*async_desc), GFP_NOWAIT);
> +	if (!async_desc)
> +		return ERR_PTR(-ENOMEM);
> +
> +	if (crci)
> +		async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?
> +					ADM_CRCI_CTL_MUX_SEL : 0;
> +	async_desc->crci = crci;
> +	async_desc->blk_size = blk_size;
> +	async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +
> +				box_count * sizeof(struct adm_desc_hw_box) +
> +				sizeof(*cple) + 2 * ADM_DESC_ALIGN;
> +
> +	async_desc->cpl = kzalloc(async_desc->dma_len, GFP_NOWAIT);
> +	if (!async_desc->cpl)
> +		goto free;
> +
> +	async_desc->adev = adev;
> +
> +	/* both command list entry and descriptors must be 8 byte aligned */
> +	cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN);
> +	desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN);
> +
> +	for_each_sg(sgl, sg, sg_len, i) {
> +		async_desc->length += sg_dma_len(sg);
> +
> +		if (achan->slave.device_fc)
> +			desc = adm_process_fc_descriptors(achan, desc, sg, crci,
> +							  burst, direction);
> +		else
> +			desc = adm_process_non_fc_descriptors(achan, desc, sg,
> +							      direction);
> +	}
> +
> +	async_desc->dma_addr = dma_map_single(adev->dev, async_desc->cpl,
> +					      async_desc->dma_len,
> +					      DMA_TO_DEVICE);
> +	if (dma_mapping_error(adev->dev, async_desc->dma_addr))
> +		goto free;
> +
> +	cple_addr = async_desc->dma_addr + ((void *)cple - async_desc->cpl);
> +
> +	/* init cmd list */
> +	dma_sync_single_for_cpu(adev->dev, cple_addr, sizeof(*cple),
> +				DMA_TO_DEVICE);
> +	*cple = ADM_CPLE_LP;
> +	*cple |= (async_desc->dma_addr + ADM_DESC_ALIGN) >> 3;
> +	dma_sync_single_for_device(adev->dev, cple_addr, sizeof(*cple),
> +				   DMA_TO_DEVICE);
> +
> +	return vchan_tx_prep(&achan->vc, &async_desc->vd, flags);
> +
> +free:
> +	kfree(async_desc);
> +	return ERR_PTR(-ENOMEM);
> +}
> +
> +/**
> + * adm_terminate_all - terminate all transactions on a channel
> + * @achan: adm dma channel
> + *
> + * Dequeues and frees all transactions, aborts current transaction
> + * No callbacks are done
> + *
> + */
> +static int adm_terminate_all(struct dma_chan *chan)
> +{
> +	struct adm_chan *achan = to_adm_chan(chan);
> +	struct adm_device *adev = achan->adev;
> +	unsigned long flags;
> +	LIST_HEAD(head);
> +
> +	spin_lock_irqsave(&achan->vc.lock, flags);
> +	vchan_get_all_descriptors(&achan->vc, &head);
> +
> +	/* send flush command to terminate current transaction */
> +	writel_relaxed(0x0,
> +		       adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee));
> +
> +	spin_unlock_irqrestore(&achan->vc.lock, flags);
> +
> +	vchan_dma_desc_free_list(&achan->vc, &head);
> +
> +	return 0;
> +}
> +
> +static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
> +{
> +	struct adm_chan *achan = to_adm_chan(chan);
> +	unsigned long flag;
> +
> +	spin_lock_irqsave(&achan->vc.lock, flag);
> +	memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config));
> +	spin_unlock_irqrestore(&achan->vc.lock, flag);
> +
> +	return 0;
> +}
> +
> +/**
> + * adm_start_dma - start next transaction
> + * @achan - ADM dma channel
> + */
> +static void adm_start_dma(struct adm_chan *achan)
> +{
> +	struct virt_dma_desc *vd = vchan_next_desc(&achan->vc);
> +	struct adm_device *adev = achan->adev;
> +	struct adm_async_desc *async_desc;
> +
> +	lockdep_assert_held(&achan->vc.lock);
> +
> +	if (!vd)
> +		return;
> +
> +	list_del(&vd->node);
> +
> +	/* write next command list out to the CMD FIFO */
> +	async_desc = container_of(vd, struct adm_async_desc, vd);
> +	achan->curr_txd = async_desc;
> +
> +	/* reset channel error */
> +	achan->error = 0;
> +
> +	if (!achan->initialized) {
> +		/* enable interrupts */
> +		writel(ADM_CH_CONF_SHADOW_EN |
> +		       ADM_CH_CONF_PERM_MPU_CONF |
> +		       ADM_CH_CONF_MPU_DISABLE |
> +		       ADM_CH_CONF_SEC_DOMAIN(adev->ee),
> +		       adev->regs + ADM_CH_CONF(achan->id));
> +
> +		writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN,
> +		       adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
> +
> +		achan->initialized = 1;
> +	}
> +
> +	/* set the crci block size if this transaction requires CRCI */
> +	if (async_desc->crci) {
> +		writel(async_desc->mux | async_desc->blk_size,
> +		       adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee));
> +	}
> +
> +	/* make sure IRQ enable doesn't get reordered */
> +	wmb();
> +
> +	/* write next command list out to the CMD FIFO */
> +	writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3,
> +	       adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee));
> +}
> +
> +/**
> + * adm_dma_irq - irq handler for ADM controller
> + * @irq: IRQ of interrupt
> + * @data: callback data
> + *
> + * IRQ handler for the bam controller
> + */
> +static irqreturn_t adm_dma_irq(int irq, void *data)
> +{
> +	struct adm_device *adev = data;
> +	u32 srcs, i;
> +	struct adm_async_desc *async_desc;
> +	unsigned long flags;
> +
> +	srcs = readl_relaxed(adev->regs +
> +			ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee));
> +
> +	for (i = 0; i < ADM_MAX_CHANNELS; i++) {
> +		struct adm_chan *achan = &adev->channels[i];
> +		u32 status, result;
> +
> +		if (srcs & BIT(i)) {
> +			status = readl_relaxed(adev->regs +
> +					       ADM_CH_STATUS_SD(i, adev->ee));
> +
> +			/* if no result present, skip */
> +			if (!(status & ADM_CH_STATUS_VALID))
> +				continue;
> +
> +			result = readl_relaxed(adev->regs +
> +				ADM_CH_RSLT(i, adev->ee));
> +
> +			/* no valid results, skip */
> +			if (!(result & ADM_CH_RSLT_VALID))
> +				continue;
> +
> +			/* flag error if transaction was flushed or failed */
> +			if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH))
> +				achan->error = 1;
> +
> +			spin_lock_irqsave(&achan->vc.lock, flags);
> +			async_desc = achan->curr_txd;
> +
> +			achan->curr_txd = NULL;
> +
> +			if (async_desc) {
> +				vchan_cookie_complete(&async_desc->vd);
> +
> +				/* kick off next DMA */
> +				adm_start_dma(achan);
> +			}
> +
> +			spin_unlock_irqrestore(&achan->vc.lock, flags);
> +		}
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +/**
> + * adm_tx_status - returns status of transaction
> + * @chan: dma channel
> + * @cookie: transaction cookie
> + * @txstate: DMA transaction state
> + *
> + * Return status of dma transaction
> + */
> +static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
> +				     struct dma_tx_state *txstate)
> +{
> +	struct adm_chan *achan = to_adm_chan(chan);
> +	struct virt_dma_desc *vd;
> +	enum dma_status ret;
> +	unsigned long flags;
> +	size_t residue = 0;
> +
> +	ret = dma_cookie_status(chan, cookie, txstate);
> +	if (ret == DMA_COMPLETE || !txstate)
> +		return ret;
> +
> +	spin_lock_irqsave(&achan->vc.lock, flags);
> +
> +	vd = vchan_find_desc(&achan->vc, cookie);
> +	if (vd)
> +		residue = container_of(vd, struct adm_async_desc, vd)->length;
> +
> +	spin_unlock_irqrestore(&achan->vc.lock, flags);
> +
> +	/*
> +	 * residue is either the full length if it is in the issued list, or 0
> +	 * if it is in progress.  We have no reliable way of determining
> +	 * anything inbetween
> +	 */
> +	dma_set_residue(txstate, residue);
> +
> +	if (achan->error)
> +		return DMA_ERROR;
> +
> +	return ret;
> +}
> +
> +/**
> + * adm_issue_pending - starts pending transactions
> + * @chan: dma channel
> + *
> + * Issues all pending transactions and starts DMA
> + */
> +static void adm_issue_pending(struct dma_chan *chan)
> +{
> +	struct adm_chan *achan = to_adm_chan(chan);
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&achan->vc.lock, flags);
> +
> +	if (vchan_issue_pending(&achan->vc) && !achan->curr_txd)
> +		adm_start_dma(achan);
> +	spin_unlock_irqrestore(&achan->vc.lock, flags);
> +}
> +
> +/**
> + * adm_dma_free_desc - free descriptor memory
> + * @vd: virtual descriptor
> + *
> + */
> +static void adm_dma_free_desc(struct virt_dma_desc *vd)
> +{
> +	struct adm_async_desc *async_desc = container_of(vd,
> +			struct adm_async_desc, vd);
> +
> +	dma_unmap_single(async_desc->adev->dev, async_desc->dma_addr,
> +			 async_desc->dma_len, DMA_TO_DEVICE);
> +	kfree(async_desc->cpl);
> +	kfree(async_desc);
> +}
> +
> +static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
> +			     u32 index)
> +{
> +	achan->id = index;
> +	achan->adev = adev;
> +
> +	vchan_init(&achan->vc, &adev->common);
> +	achan->vc.desc_free = adm_dma_free_desc;
> +}
> +
> +static int adm_dma_probe(struct platform_device *pdev)
> +{
> +	struct adm_device *adev;
> +	int ret;
> +	u32 i;
> +
> +	adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL);
> +	if (!adev)
> +		return -ENOMEM;
> +
> +	adev->dev = &pdev->dev;
> +
> +	adev->regs = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(adev->regs))
> +		return PTR_ERR(adev->regs);
> +
> +	adev->irq = platform_get_irq(pdev, 0);
> +	if (adev->irq < 0)
> +		return adev->irq;
> +
> +	ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee);
> +	if (ret) {
> +		dev_err(adev->dev, "Execution environment unspecified\n");
> +		return ret;
> +	}
> +
> +	adev->core_clk = devm_clk_get(adev->dev, "core");
> +	if (IS_ERR(adev->core_clk))
> +		return PTR_ERR(adev->core_clk);
> +
> +	adev->iface_clk = devm_clk_get(adev->dev, "iface");
> +	if (IS_ERR(adev->iface_clk))
> +		return PTR_ERR(adev->iface_clk);
> +
> +	adev->clk_reset = devm_reset_control_get_exclusive(&pdev->dev, "clk");
> +	if (IS_ERR(adev->clk_reset)) {
> +		dev_err(adev->dev, "failed to get ADM0 reset\n");
> +		return PTR_ERR(adev->clk_reset);
> +	}
> +
> +	adev->c0_reset = devm_reset_control_get_exclusive(&pdev->dev, "c0");
> +	if (IS_ERR(adev->c0_reset)) {
> +		dev_err(adev->dev, "failed to get ADM0 C0 reset\n");
> +		return PTR_ERR(adev->c0_reset);
> +	}
> +
> +	adev->c1_reset = devm_reset_control_get_exclusive(&pdev->dev, "c1");
> +	if (IS_ERR(adev->c1_reset)) {
> +		dev_err(adev->dev, "failed to get ADM0 C1 reset\n");
> +		return PTR_ERR(adev->c1_reset);
> +	}
> +
> +	adev->c2_reset = devm_reset_control_get_exclusive(&pdev->dev, "c2");
> +	if (IS_ERR(adev->c2_reset)) {
> +		dev_err(adev->dev, "failed to get ADM0 C2 reset\n");
> +		return PTR_ERR(adev->c2_reset);
> +	}
> +
> +	ret = clk_prepare_enable(adev->core_clk);
> +	if (ret) {
> +		dev_err(adev->dev, "failed to prepare/enable core clock\n");
> +		return ret;
> +	}
> +
> +	ret = clk_prepare_enable(adev->iface_clk);
> +	if (ret) {
> +		dev_err(adev->dev, "failed to prepare/enable iface clock\n");
> +		goto err_disable_core_clk;
> +	}
> +
> +	reset_control_assert(adev->clk_reset);
> +	reset_control_assert(adev->c0_reset);
> +	reset_control_assert(adev->c1_reset);
> +	reset_control_assert(adev->c2_reset);
> +
> +	udelay(2);
> +
> +	reset_control_deassert(adev->clk_reset);
> +	reset_control_deassert(adev->c0_reset);
> +	reset_control_deassert(adev->c1_reset);
> +	reset_control_deassert(adev->c2_reset);
> +
> +	adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS,
> +				      sizeof(*adev->channels), GFP_KERNEL);
> +
> +	if (!adev->channels) {
> +		ret = -ENOMEM;
> +		goto err_disable_clks;
> +	}
> +
> +	/* allocate and initialize channels */
> +	INIT_LIST_HEAD(&adev->common.channels);
> +
> +	for (i = 0; i < ADM_MAX_CHANNELS; i++)
> +		adm_channel_init(adev, &adev->channels[i], i);
> +
> +	/* reset CRCIs */
> +	for (i = 0; i < 16; i++)
> +		writel(ADM_CRCI_CTL_RST, adev->regs +
> +			ADM_CRCI_CTL(i, adev->ee));
> +
> +	/* configure client interfaces */
> +	writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) |
> +	       ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0));
> +	writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) |
> +	       ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1));
> +	writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) |
> +	       ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2));
> +	writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf),
> +	       adev->regs + ADM_GP_CTL);
> +
> +	ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq,
> +			       0, "adm_dma", adev);
> +	if (ret)
> +		goto err_disable_clks;
> +
> +	platform_set_drvdata(pdev, adev);
> +
> +	adev->common.dev = adev->dev;
> +	adev->common.dev->dma_parms = &adev->dma_parms;
> +
> +	/* set capabilities */
> +	dma_cap_zero(adev->common.cap_mask);
> +	dma_cap_set(DMA_SLAVE, adev->common.cap_mask);
> +	dma_cap_set(DMA_PRIVATE, adev->common.cap_mask);
> +
> +	/* initialize dmaengine apis */
> +	adev->common.directions = BIT(DMA_DEV_TO_MEM | DMA_MEM_TO_DEV);
> +	adev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
> +	adev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +	adev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +	adev->common.device_free_chan_resources = adm_free_chan;
> +	adev->common.device_prep_slave_sg = adm_prep_slave_sg;
> +	adev->common.device_issue_pending = adm_issue_pending;
> +	adev->common.device_tx_status = adm_tx_status;
> +	adev->common.device_terminate_all = adm_terminate_all;
> +	adev->common.device_config = adm_slave_config;
> +
> +	ret = dma_async_device_register(&adev->common);
> +	if (ret) {
> +		dev_err(adev->dev, "failed to register dma async device\n");
> +		goto err_disable_clks;
> +	}
> +
> +	ret = of_dma_controller_register(pdev->dev.of_node,
> +					 of_dma_xlate_by_chan_id,
> +					 &adev->common);
> +	if (ret)
> +		goto err_unregister_dma;
> +
> +	return 0;
> +
> +err_unregister_dma:
> +	dma_async_device_unregister(&adev->common);
> +err_disable_clks:
> +	clk_disable_unprepare(adev->iface_clk);
> +err_disable_core_clk:
> +	clk_disable_unprepare(adev->core_clk);
> +
> +	return ret;
> +}
> +
> +static int adm_dma_remove(struct platform_device *pdev)
> +{
> +	struct adm_device *adev = platform_get_drvdata(pdev);
> +	struct adm_chan *achan;
> +	u32 i;
> +
> +	of_dma_controller_free(pdev->dev.of_node);
> +	dma_async_device_unregister(&adev->common);
> +
> +	for (i = 0; i < ADM_MAX_CHANNELS; i++) {
> +		achan = &adev->channels[i];
> +
> +		/* mask IRQs for this channel/EE pair */
> +		writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
> +
> +		tasklet_kill(&adev->channels[i].vc.task);
> +		adm_terminate_all(&adev->channels[i].vc.chan);
> +	}
> +
> +	devm_free_irq(adev->dev, adev->irq, adev);
> +
> +	clk_disable_unprepare(adev->core_clk);
> +	clk_disable_unprepare(adev->iface_clk);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id adm_of_match[] = {
> +	{ .compatible = "qcom,adm", },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, adm_of_match);
> +
> +static struct platform_driver adm_dma_driver = {
> +	.probe = adm_dma_probe,
> +	.remove = adm_dma_remove,
> +	.driver = {
> +		.name = "adm-dma-engine",
> +		.of_match_table = adm_of_match,
> +	},
> +};
> +
> +module_platform_driver(adm_dma_driver);
> +
> +MODULE_AUTHOR("Andy Gross <agross@...eaurora.org>");
> +MODULE_DESCRIPTION("QCOM ADM DMA engine driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.20.1
> 

J.

-- 

Powered by blists - more mailing lists