| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 26 Oct 2020 13:42:08 +1030
From: "Andrew Jeffery" <andrew@...id.au>
To: "Chia-Wei, Wang" <chiawei_wang@...eedtech.com>,
"Rob Herring" <robh+dt@...nel.org>, "Joel Stanley" <joel@....id.au>
Cc: "Ryan Chen" <ryan_chen@...eedtech.com>,
"Lee Jones" <lee.jones@...aro.org>,
"Corey Minyard" <minyard@....org>, "Arnd Bergmann" <arnd@...db.de>,
"Greg Kroah-Hartman" <gregkh@...uxfoundation.org>,
"Linus Walleij" <linus.walleij@...aro.org>,
"Haiyue Wang" <haiyue.wang@...ux.intel.com>,
"Cyril Bur" <cyrilbur@...il.com>,
"Robert Lippert" <rlippert@...gle.com>,
linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
openbmc@...ts.ozlabs.org, linux-gpio@...r.kernel.org
Subject: Re: [PATCH v2 5/5] dt-bindings: aspeed-lpc: Remove LPC partitioning
Hi Wang Chia-Wei,
On Mon, 5 Oct 2020, at 18:58, Chia-Wei, Wang wrote:
> The LPC controller has no concept of the BMC and the Host partitions.
> This patch fixes the documentation by removing the description on LPC
> partitions. The register offsets illustrated in the DTS node examples
> are also fixed to adapt to the LPC DTS change.
>
> Signed-off-by: Chia-Wei, Wang <chiawei_wang@...eedtech.com>
The documentation at [1] suggests this should probably be patch 1/5 rather than
5/5, so if you send the series again I'd probably rearrange it. Following the
steps outlined in [1] helps catch Rob's attention in the right way :)
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/submitting-patches.rst?h=v5.9
Rob:
The changes here go some way towards cleaning up mistakes I made in the Aspeed
LPC controller binding. The proposed change is very much not backwards
compatible, but Joel and I don't want to live with the resulting mess in the
drivers of catering to both layouts. Another way we could avoid the driver mess
is to rev all the bindings and immediately drop support for the old compatibles
in the drivers. This creates a bit more churn in the bindings. What are you
willing to accommodate?
All consumers I'm aware of ship the Aspeed BMC dtb in FIT images alongside the
kernel, so while backwards-incompatible changes are rightly frowned upon I feel
we probably wouldn't cause too much damage if we went that path.
Andrew
> ---
> .../devicetree/bindings/mfd/aspeed-lpc.txt | 85 +++----------------
> 1 file changed, 14 insertions(+), 71 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
> b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
> index a92acf1dd491..866f54a09e09 100644
> --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
> +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
> @@ -9,13 +9,7 @@ primary use case of the Aspeed LPC controller is as a
> slave on the bus
> conditions it can also take the role of bus master.
>
> The LPC controller is represented as a multi-function device to account for the
> -mix of functionality it provides. The principle split is between the register
> -layout at the start of the I/O space which is, to quote the Aspeed datasheet,
> -"basically compatible with the [LPC registers from the] popular BMC controller
> -H8S/2168[1]", and everything else, where everything else is an eclectic
> -collection of functions with a esoteric register layout. "Everything else",
> -here labeled the "host" portion of the controller, includes, but is not limited
> -to:
> +mix of functionality, which includes, but is not limited to:
>
> * An IPMI Block Transfer[2] Controller
>
> @@ -44,8 +38,8 @@ Required properties
> ===================
>
> - compatible: One of:
> - "aspeed,ast2400-lpc", "simple-mfd"
> - "aspeed,ast2500-lpc", "simple-mfd"
> + "aspeed,ast2400-lpc", "simple-mfd", "syscon"
> + "aspeed,ast2500-lpc", "simple-mfd", "syscon"
>
> - reg: contains the physical address and length values of the Aspeed
> LPC memory region.
> @@ -55,66 +49,17 @@ Required properties
> - ranges: Maps 0 to the physical address and length of the LPC memory
> region
>
> -Required LPC Child nodes
> -========================
> -
> -BMC Node
> ---------
> -
> -- compatible: One of:
> - "aspeed,ast2400-lpc-bmc"
> - "aspeed,ast2500-lpc-bmc"
> -
> -- reg: contains the physical address and length values of the
> - H8S/2168-compatible LPC controller memory region
> -
> -Host Node
> ----------
> -
> -- compatible: One of:
> - "aspeed,ast2400-lpc-host", "simple-mfd", "syscon"
> - "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"
> -
> -- reg: contains the address and length values of the host-related
> - register space for the Aspeed LPC controller
> -
> -- #address-cells: <1>
> -- #size-cells: <1>
> -- ranges: Maps 0 to the address and length of the host-related LPC memory
> - region
> -
> Example:
>
> lpc: lpc@...89000 {
> - compatible = "aspeed,ast2500-lpc", "simple-mfd";
> + compatible = "aspeed,ast2500-lpc", "simple-mfd", "syscon";
> reg = <0x1e789000 0x1000>;
>
> #address-cells = <1>;
> #size-cells = <1>;
> ranges = <0x0 0x1e789000 0x1000>;
> -
> - lpc_bmc: lpc-bmc@0 {
> - compatible = "aspeed,ast2500-lpc-bmc";
> - reg = <0x0 0x80>;
> - };
> -
> - lpc_host: lpc-host@80 {
> - compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
> - reg = <0x80 0x1e0>;
> - reg-io-width = <4>;
> -
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0x0 0x80 0x1e0>;
> - };
> };
>
> -BMC Node Children
> -==================
> -
> -
> -Host Node Children
> -==================
>
> LPC Host Interface Controller
> -------------------
> @@ -145,14 +90,12 @@ Optional properties:
>
> Example:
>
> -lpc-host@80 {
> - lpc_ctrl: lpc-ctrl@0 {
> - compatible = "aspeed,ast2500-lpc-ctrl";
> - reg = <0x0 0x80>;
> - clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
> - memory-region = <&flash_memory>;
> - flash = <&spi>;
> - };
> +lpc_ctrl: lpc-ctrl@80 {
> + compatible = "aspeed,ast2500-lpc-ctrl";
> + reg = <0x80 0x80>;
> + clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
> + memory-region = <&flash_memory>;
> + flash = <&spi>;
> };
>
> LPC Host Controller
> @@ -174,9 +117,9 @@ Required properties:
>
> Example:
>
> -lhc: lhc@20 {
> +lhc: lhc@a0 {
> compatible = "aspeed,ast2500-lhc";
> - reg = <0x20 0x24 0x48 0x8>;
> + reg = <0xa0 0x24 0xc8 0x8>;
> };
>
> LPC reset control
> @@ -194,8 +137,8 @@ Required properties:
>
> Example:
>
> -lpc_reset: reset-controller@18 {
> +lpc_reset: reset-controller@98 {
> compatible = "aspeed,ast2500-lpc-reset";
> - reg = <0x18 0x4>;
> + reg = <0x98 0x4>;
> #reset-cells = <1>;
> };
> --
> 2.17.1
>
>
Powered by blists - more mailing lists